Caprari Model DMR80 3/2 PTO Pump (USED)

A power take-off (PTO) is a device that transfers an engine’s mechanical power and uses it to power another device. It can be used as a mechanical source to power another mechanical unit, such as a water pump or auger/screw conveyor, that doesn’t have its own power supply.

Caprari Power Take Off Pump – Model DMR80 – Serial # 330847 – Manf Date 03/98 (USED)

Standard Features:

• Compact, reliable PTO pump capable of 200 to 800 gpm with
  corresponding pressures of 193 to 142 psi using 51 to 90 hp
  • Available with heavy-duty two-wheeled trailer or galvanized three
  point mount
  • Designed with an industry leading oil lubricated step-up gearbox (no
  belts or pulleys) with shafts supported by widely spaced bearings
  • Easily replaceable packing gland type water seal
• Options:
  • 4” female thread discharge priming valve
  • Hand primer
  • Fluid filled pressure gauge
  • Short suction adapter with
  5” female pipe thread
  • #6 heavy duty 13/8 six spline PTO shaft
• Configurations:
  A. Bare Pump: Pump only with weld-on
  companion flanges, gaskets, nuts and bolts
  B. Pump, Cart & Shaft: Same as bare pump, but
  mounted on two-wheeled cart & PTO drive
  shaft
  C. Fully Fitted: Same as pump, cart & shaft plus
  hand primer, check valve, pressure gauge and
  suction fittings
• Specifications:
  • Suction (A,B): 100mm DIN Flange
  • Suction (C): 5” NPTF
  • Discharge (A,B): 80mm DIN Flange
  • Discharge (C): 4” NPTF
  • Discharge Position: Horizontal, Right Facing
  (When Standing Behind The Suction End)
  • Length: 70 Inches
  • Width: 54 Inches
  • Height: 41 Inches
  • Weight (Unfitted): 400 lbs.
  • Weight (Fitted): 460 lbs

Call today to order!

Full array of suction and discharge fittings available for separate purchase. (Pump ships without pictured fittings)