-
"U" Clevis 2" x 7 Hole Steel Fabrication Fitting Brand Name: Pierce
-
#7 Berkeley Diaphragm - Height 2 5/8" (bottom to top of lip) x 6 3/4" Outside Diameter Top (outside of lip to outside of lip) x 5 1/2" Diameter Base Bottom (outside of lip to outside of lip).
-
* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F.
-
-
1" 45 Degree Poly Elbow Female Thread. Made of heavy-duty and durable polypropylene. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
One of the key elements in a drip irrigation system is air relief. Clogged emitters can create substantial voids in coverage which can lead to dead plants and dry turf. Installing automatic air relief valves on the end of lateral lines and emitter line will prolong the efficiency of your system.
-
1" Insert x 3/4" MPT Adapter is used to couple a 1" rigid hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1" O.D. (outside diameter) opening to a 3/4" O.D. Previous SKU: G-00171 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order two at a time. If you are ordering three or more rolls, please call 517-458-9741 for other shipping options.
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
Previous SKU: G-00171This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
1" Stem w/ Solid Yoke for 8" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer!
-
1/4″ Vinyl Distribution Tubing allows you to get water to the desired locations in a conservative manner. You may use fittings to extend the length of tubing, make a 90 degree angle or add a row to your system. You can also insert an emitter at the end of the line to reach the exact location of a planting. A 250 barb goof plug may be used at the end of the line to close it off.
- All Jain polyethylene tubing is manufactured using Union Carbide materials that offer the exclusive Fingerprint® identification feature and contain a minimum of 2% carbon black for UV protection
- Strict quality control procedures ensure highest uniformity and product quality
- Polyethylene and vinyl tubing are available in black (standard) and special colors (upon request)
- Complete information printed on the tubing indicates manufacturer, model number, dimensions, resin, and date of manufacture. As applicable, the coil length is also included.
- Convenient coil sizes and packaging to ease handling and installation
-
1/2" - 3/4" - 1" Sizes of 100' - Clear Vinyl Tubing Available for purchase
-
Replacement 12 Volt Motor Assembly with Solenoid for 12 Volt Power Primer. This motor assembly consists of items #408, #409, #410, #411, #412 and #413 on the diagram below.
-
Sale!Tired of having to hand pump your suction lines? Prime your pumps with ease with this 12 Volt Vacuum Pump! 30 C.F.M. Pumping Capabilities 3200 RPM DC Motor Easy Operating Panel Mount Valve /12V Switch 3L Oil Reservoir with Mounting Brackets Kits come with everything needed to plumb to your existing pump setup Easy Installation Huge Air Volume High Suction Lift 3/4" Pipe Thread Plumbing Fittings Other variations of this model are available Parts available: Please see below - Please feel to call us if you have any questions or to place an order for replacement parts
-
2-In-1 Punch & Cutter
A combination tool that prepares poly tube for the installation of emitters and fittings in low pressure irrigation systems.
Features- Aligns the tube ensuring a clean, square cut.
- Suitable for cutting LDPE pipe, vinyl tubing, drip tubes, soaker hoses, micro tubes, clear vinyl tubes (CVT) and other "soft" tubes up to 3/4" OD.
- Punches a hole into 1/2" and 3/4" LDPE for the installation of Drippers, Sprays, Rigid Risers and micro tube fittings.
- Punch pierces a clean hole and removes wad leaving tube free of debris.
-
Series 3000 Air Vent and Vacuum Relief Valves protect both pressure and gravity systems against pipeline damage by releasing or venting entrapped air during system filling and preventing vacuum locks while the pipeline empties. This 2" Air Vent is normally installed by threading onto NPT (National Pipe Thread) steel or plastic risers. Features:
- Large orifice engineered to provide maximum air flow.
- Cast aluminum body combines lightweight strength and corrosion resistance.
- Synthetic rubber seal assures positive seal even with low head applications.
- Simple design ensures economical trouble-free performance.
- Maximum working pressure = 150 psi.
- Orifice diameter = 1.75"
- Height = 6.00"
- Width = 3.72"
-
2" 90 Degree Poly Elbow. Made of heavy-duty and durable polypropylene. Female Camlock x Female Pipe Thread. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings!