-
Sale!"U" Clevis 2" x 7 Hole Steel Fabrication Fitting Brand Name: Pierce
-
#7 Berkeley Diaphragm - Height 2 5/8" (bottom to top of lip) x 6 3/4" Outside Diameter Top (outside of lip to outside of lip) x 5 1/2" Diameter Base Bottom (outside of lip to outside of lip).
-
Sale!* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F.
-
Replacement 1 1/2" Locknut for the #7 and #9 Protek hand primer. Made out of a lightweight, durable aluminum. Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Sale!1" 45 Degree Poly Elbow Female Thread. Made of heavy-duty and durable polypropylene. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
Description Air/Vacuum Relief Valves deliver optimum performance and increased efficiency of an irrigation system by preventing air-lock problems and back suctioning of debris into the lines. The Air/Vacuum Relief Valve allows air to escape during the system’s initial start and until the pipe or drip lines are full of water. It also allows air to enter back into the system when the zone is turned off. The Air/Vacuum Relief Valve helps prevent clogging in sub-surface drip irrigation systems resulting from back suction of debris under vacuum conditions. Install the Air Vacuum Relief Valve at the highest point of a drip line installation. Features:
- Reduces maintenance requirements and extend drip system life
- Smooth and reliable operation
- Eliminates air pockets within a system zone
- Releases air from the drip line when the zone is turned on
- Allow air to freely enter the system when the zone is shut down
- Ball float design offers perfect sealing under very low system pressure
- Easy to handle and maintain
- Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
1" Insert x 3/4" MPT Adapter is used to couple a 1" rigid hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1" O.D. (outside diameter) opening to a 3/4" O.D. Previous SKU: G-00171 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order one at a time. If you are ordering two or more rolls, please call 517-458-9741 for other shipping options.
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
Previous SKU: G-00171This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!1" Stem w/ Solid Yoke for 8" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
The WER 1/2-13 x 2 Flat Socket Cap Stainless Wear Plate Fastener (TRI-PUR-000211) is a precision-engineered replacement bolt designed for securely fastening wear plates in manure and slurry pump systems. Its flat socket cap design ensures a flush fit, while the stainless steel construction delivers excellent strength and resistance to corrosion in harsh agricultural environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer!
-
Sale!1/4″ Barb Connector to be used with drip irrigation to either connect 1/4″ dripper tubing or 1/4″ distribution tubing to 1/2″ supply tubing or to extend the length of 1/4″ tubing by acting as a coupling. Use a 1/4″ punch tool to make the proper size hole in the supply tubing. This irrigation method works great in landscaping, hanging baskets, flower pots and garden boxes! Brand Name: Jain
-
Sale!1/4" Barb Tee (fits 0.160 ID to 0.170 ID tubing), which is a 1/4" barb x 1/4" barb x 1/4" barb fitting, allows you to branch off an additional 1/4″ line from the mainline or for an individual row. Due to the style and size of the tubing as, a clamp is not typically required. Brand Name: Jain
-
Sale!Ejector Style Hole Punch used for “punching” a hole in rigid poly tubing to insert 1/4″ barb fittings. This punch is constructed of heavy duty plastic. It creates clean, precise holes for 1/4″ barb fittings. Ejector pin quickly cleans the punch tool of debris. Previous SKU: G-00177 Brand Name: Jain
-
Sale!10.25" Female Weld on Coupler HF Brand Name: Metal 360
-
Sale!10.25" HF HD Ringlock Clamp Brand Name: Metal 360
For an overview of the different types of clamps available visit the following video:
Clamps Explained!
-
Sale!10.25" Male Weld on End Flare HF Brand Name: Metal 360
-
The WER 10" x 8 Bolt ANSI Flange (TRI-MAN-002446) is engineered for secure, leak-resistant connections in demanding manure and slurry management systems. Built to ANSI standards, this heavy-duty flange ensures a precise fit, providing the strength and reliability required for high-pressure agricultural pumping applications. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!1/2" - 3/4" - 1" Sizes of 100' - Clear Vinyl Tubing Available for purchase
-
Replacement 12 Volt Motor Assembly with Solenoid for 12 Volt Power Primer. This motor assembly consists of items #408, #409, #410, #411, #412 and #413 on the diagram below.
-
Tired of having to hand pump your suction lines? Prime your pumps with ease with this 12 Volt Vacuum Pump! 30 C.F.M. Pumping Capabilities: 3200 RPM DC Motor Easy Operating Panel Mount Valve /12V Switch 3L Oil Reservoir with Mounting Brackets (use 10 or 20 Non-Detergent Oil, or Automatic Transmission Oil or #32 Light Hydraulic Oil) Kits come with everything needed to plumb to your existing pump setup Easy Installation Huge Air Volume High Suction Lift 3/4" Pipe Thread Plumbing Fittings Other variations of this model are available Generally speaking: For precise vacuum levels at specific CFM rates, the manufacturer's performance curve or datasheet would be ideal. However, the above estimation provides a general understanding based on typical vacuum pump performance:
- 30 CFM: ~0-5 inHg
- 20-25 CFM: ~5-10 inHg
- 10-15 CFM: ~15-20 inHg
- <5 CFM: ~25-29.92 inHg
-
This is a carrying case for the 12 Volt Primer. Separate compartments for the 12-volt battery on the front with mounting brackets on the back to make access easy. It also provides for a balanced weight distribution. Steel construction with black powder coating.
-
The WER Macerator / Distributor provides a consistent ow of liquid material for a wide range of application methods. The high grade chopping system, and auto-reverse function, ensure an obstruction free, and balanced distribution of your product. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
The 150# 304 Stainless Steel 45 Degree Elbow – ISO 49 is a durable pipe fitting designed to change flow direction by 45 degrees in stainless steel piping systems. Made from 304 stainless steel, it offers strong corrosion resistance, dependable strength, and long service life in demanding irrigation, agricultural, industrial, and fluid-handling applications.
-
The Merit Brass stainless steel 90° street elbow provides compact directional flow changes by connecting male and female threaded components in irrigation and manure plumbing systems.
-
2-In-1 Punch & Cutter
A combination tool that prepares poly tube for the installation of emitters and fittings in low pressure irrigation systems.
Features- Aligns the tube ensuring a clean, square cut.
- Suitable for cutting LDPE pipe, vinyl tubing, drip tubes, soaker hoses, micro tubes, clear vinyl tubes (CVT) and other "soft" tubes up to 3/4" OD.
- Punches a hole into 1/2" and 3/4" LDPE for the installation of Drippers, Sprays, Rigid Risers and micro tube fittings.
- Punch pierces a clean hole and removes wad leaving tube free of debris.
-
The Merit Brass 2" 150 lb stainless steel ANSI raised face threaded flange provides secure, corrosion-resistant pipe connections in irrigation, manure, and agricultural water transfer systems.
-
Sale!Series 3000 Air Vent and Vacuum Relief Valves protect both pressure and gravity systems against pipeline damage by releasing or venting entrapped air during system filling and preventing vacuum locks while the pipeline empties. This 2" Air Vent is normally installed by threading onto NPT (National Pipe Thread) steel or plastic risers. Features:
- Large orifice engineered to provide maximum air flow.
- Cast aluminum body combines lightweight strength and corrosion resistance.
- Synthetic rubber seal assures positive seal even with low head applications.
- Simple design ensures economical trouble-free performance.
- Maximum working pressure = 150 psi.
- Orifice diameter = 1.75"
- Height = 6.00"
- Width = 3.72"
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!Continuous Automatic Air Vent/Vacuum Relief Valve: Manages air intake and release from irrigation lines ensuring long life High quality UV protected nylon, corrosion resistant Smooth opening and closing Continuous Air Vents maximum operating pressure: 145 PSI
-
Sale!2" 90 Degree Poly Elbow. Made of heavy-duty and durable polypropylene. Female Camlock x Female Pipe Thread. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings!
-
Sale!2" Flange x FPT, Banjo 2" Full Port Flange x FML Pipe Thread
-
Sale!2" 45 degree Poly Elbow. Made of heavy-duty and durable polypropylene. Male Pipe Thread x Male Adapter. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
Sale!2" 90 degree Poly Elbow. Made of heavy-duty and durable polypropylene. Male Adapter x Male Pipe Thread. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
Sale!* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
The right air hose can help simplify a lot of chores in your operation. What should you be looking for in a quality air hose? CLICK HERE to learn about the 10 things to look for when buying air hoses for commercial use. Mandals Mantex is a lightweight, yet rugged and hard-wearing hose. It is made from a blend of nitrile rubber and PVC, with an added UV barrier to prevent damage from UV radiation. Mandals Mantex HP is a world-class agricultural lay flat air hose designed for compressed air at high working pressures, while still offering a lightweight solution that is easy to deploy and store. An ideal agricultural air hose!
- Mandals Mantex Air Hose with Dixon GJ Boss Female Coupling with Polymer Seat
- Plated Iron
- .55lbs/ft
- 600 PSI Pressure Rating
- 2535 Burst Pressure Rating
- Wall Thickness .17in
- Tensile Strength 31,700 lbs
-
Sale!A 2″ Filter Plastic with Flush Valve is an irrigation component designed to filter out debris and particulate matter from the water supply before it enters the irrigation system. The 2-inch specification refers to the diameter of the inlet and outlet connections, making it suitable for moderate to large-scale irrigation setups. This type of filter is typically made from durable plastic, which provides resistance to corrosion and ensures long-term performance in outdoor conditions. The flush valve feature allows for easy cleaning and maintenance of the filter by enabling users to flush out accumulated debris without disassembling the entire unit. This helps maintain optimal water flow and prevents clogs or damage to downstream equipment like drip lines, sprinklers, or emitters. In farming and gardening, using a filter with a flush valve is essential for protecting the irrigation system, ensuring consistent water delivery, and extending the lifespan of the system components.
-
Sale!* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Sale!2" x 2" Threaded "Y" Strainer with 50 Mesh Poly Ribbed Stainless Steel Screen. Made out of a heavy-duty and durable polypropylene.
Lightweight. Precision molded construction. High volume. Constructed of glass filled polypropylene. Clean-out plug.
*Remember to check out our full line of Banjo Fittings! Brand Name: Banjo -
Sale!Easy On/Off hose connections. Positive seals. Quick & easy assembly. Maximum operating pressure 300 PSI.
-
Out of stock
Product Overview
The 100' x 6" Layflat Nitrile Rubber Hose is engineered for high-volume water transfer in demanding agricultural environments. Built from durable nitrile rubber with a reinforced textile construction, this hose lays flat for easy transport and storage, yet performs under high flow and pressure when deployed.
Designed for farmers, irrigators, and manure management professionals, this hose handles rugged field conditions while maintaining flexibility and kink resistance.
NOTE: This hose is rated at 250 PSI.
This hose comes with Pierce Female Ends on each end for easy use.
Call 517-458-9741 for a freight quote.
-
Sale!
No April Fools on this offer. Save another $100. Was $600. Now $500. Only one left to sell!
Product Overview
The 100' x 6" Layflat Rubber Hose is built for high-volume water transfer in agricultural and industrial environments. Designed to move large amounts of water quickly and efficiently, this hose lays flat when not pressurized for compact storage and easy handling.
With a reinforced construction and durable rubber exterior, it’s ideal for pump discharge, surface irrigation, and temporary transfer lines where reliability matters.
NOTE: This hose is rated at 150 PSI.
This hose comes with Pierce Female Ends on each end for easy use.
Call 517-458-9741 for a freight quote.
-
Sale!
No April Fools on this offer. Save $200. Was $1,200. Now $1,000. Only one to sell!
Product Overview
The 200' x 6" Layflat Nitrile Rubber Hose is engineered for high-volume water transfer in demanding agricultural environments. Built from durable nitrile rubber with a reinforced textile construction, this hose lays flat for easy transport and storage, yet performs under high flow and pressure when deployed.
Designed for farmers, irrigators, and manure management professionals, this hose handles rugged field conditions while maintaining flexibility and kink resistance.
NOTE: This hose is rated at 250 PSI.
This hose comes with Pierce Female Ends on each end for easy use.
Call 517-458-9741 for a freight quote.
-
22.5 Deg Mitered Welding Elbow Steel. Made out of a heavy-duty and durable 10 gauge steel. Seams are precision welded to meet your expectations. *Be sure to check out our full line of Steel Fabrication Parts!
-
Sale!250 Barb Goof Plug (MP1) - Also known as a Mistake Plug - SET OF 10 PLUGS 2 sizes per plug:
- Small Plug: shank 0.161", barb 0.214"
- Large Plug: shank 0.235", barb 0.293"
-
Sale!A 3 x 2 Slip Rigid Saddle Tee is a specialized fitting used in irrigation systems to create a branch connection from a main pipeline to a smaller pipe or lateral line. This type of saddle tee is designed to fit securely onto a 3-inch main pipe and provide a 2-inch outlet for water distribution.
-
Sale!* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Sale!* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Rainway couplers. Made of long lasting, durable rubber. Fits ROUND Rainway Couplers Check out all of our commercial grade irrigation gaskets.
-
Sale!3" x 3" Threaded "Y" Strainer with 50 Mesh Stainless Steel Screen. Made out of a heavy-duty and durable polypropylene. Lightweight. High volume. Constructed of glass filled polypropylene. 1/2" drain plug in bottom of cap. Reinforced 304 stainless steel screen. 3" female NPT threads. 75 P.S.I. maximum. Warning: 3" MLS "Y" Strainer to be used on suction side or non-pressure side in all applications. *Remember to check out our full line of Banjo Fittings! Watch our video: Strainers Explained Brand Name: Banjo
-
Sale!
A 3-inch true union ball valve in PVC with socket-to-socket (S x S) ends and EPDM seals, plus an adapter to TXT, is a service valve used in irrigation systems to isolate large sections of pipe.
Breaking that down:
-
3" (three-inch) size – Suitable for larger mainlines and high-flow applications typical in commercial irrigation or large farms.
-
True union design – The valve body can be taken apart (union nuts loosened) without breaking the pipeline; this makes maintenance, replacement, and cleaning much easier.
-
PVC construction – Durable, corrosion-resistant plastic ideal for water systems, lightweight, and cost-effective.
-
S x S (socket x socket) – Ends are designed to be solvent-welded (glued) into PVC pipe using standard PVC cement (often with included adapters).
-
EPDM seals – Ethylene Propylene Diene Monomer elastomer seals that are resistant to water, sunlight, and many chemicals — a good general-purpose sealing material.
-
Adapter to TXT – This usually means one connection is adapted to a TXT (tie-in) port, such as a threaded or flanged connection (e.g., TXT flange, threaded female) to interface with other components like filters, pressure gauges, sensors, or manifolds.
In irrigation systems, valves like this serve as on/off shutoffs for mainlines, submains, or service branches.
Summary (Features & Benefits)
Feature Benefit 3" True Union Easy maintenance & removal PVC Body Lightweight, corrosion-resistant, cost-effective EPDM Seals Good water/chem compatibility S x S Ends Standard PVC installation TXT Adapter Flexible tie-in to other components Ball Valve Design Low pressure drop & clear open/close -
-
Sale!* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 3″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. This Automatic Discharge Priming Valve by Berkeley allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley -
The WER 3/4-10 x 2 Flat Socket Cap Stainless Steel Fastener with Nut (160-TRI-PUR-000268) is designed to lock rotary knives securely in place within WER manure and slurry pump chopper assemblies. Manufactured from heavy-duty stainless steel, this fastener resists corrosion and delivers long-lasting strength in harsh agricultural environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!Please call 517-458-9741 for the very best shipping rates on this product!
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
3/4" Lock Nut Item 6 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
Sale!
- Durable, rustproof polypropylene construction.
- Easily connects hose to spigot, sprinkler, nozzle or other hose end accessories.
- Never have to use pliers to tighten to prevent leaks.
- Quick and simple way to connect and disconnect your garden hose.
- Standard ¾" opening diameter.
- Yellow fiberglass reinforced polypropylene.
-
Sale!3/4" Stem w/ Solid Yoke for 3" to 4" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!3/4" Stem w/ Solid Yoke for 5" to 6" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Venturi Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer
-
Do you need to irrigate a pre-defined area? Do you want a sprinkler that is long-lasting, accurate, and durable? Brass irrigation sprinklers are commonly used in irrigation systems to distribute water over a designated area. They are designed to provide a uniform spray pattern and can be adjusted to control the distance and angle of the water spray. Brass sprinklers are typically attached to a water source, such as a hose or irrigation pipeline, and are connected to a system of pipes or tubing that deliver the water to the desired locations. Brass sprinklers have been popular for irrigation systems due to several advantages they offer:
- Durability: Brass is a sturdy and long-lasting material, capable of withstanding outdoor conditions, including exposure to sunlight, heat, and moisture. This durability ensures that brass sprinklers can endure extended periods of use without significant wear or damage.
- Corrosion resistance: Brass is highly resistant to corrosion, making it suitable for use with different water qualities and irrigation applications. This resistance helps prevent the formation of rust and mineral deposits, which can clog the sprinkler and reduce its effectiveness.
- Heat resistance: Brass has good heat resistance, allowing it to withstand high temperatures generated by the water passing through the sprinkler. This quality makes brass sprinklers suitable for use in areas with intense sunlight or hot climates.
- Weight and stability: Brass sprinklers tend to have a relatively heavier construction compared to plastic sprinklers. This added weight contributes to their stability, preventing them from shifting or moving during operation, even in windy conditions.
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
Do you need to irrigate a pre-defined area? Do you want a sprinkler that is long-lasting, accurate, and durable? Bronze irrigation sprinklers are commonly used in irrigation systems to distribute water over a designated area. They are designed to provide a uniform spray pattern and can be adjusted to control the distance and angle of the water spray. Bronze sprinklers are typically attached to a water source, such as a hose or irrigation pipeline, and are connected to a system of pipes or tubing that deliver the water to the desired locations. Bronze sprinklers have been popular for irrigation systems due to several advantages they offer:
- Durability: Bronze is a sturdy and long-lasting material, capable of withstanding outdoor conditions, including exposure to sunlight, heat, and moisture. This durability ensures that bronze sprinklers can endure extended periods of use without significant wear or damage.
- Corrosion resistance: Bronze is highly resistant to corrosion, making it suitable for use with different water qualities and irrigation applications. This resistance helps prevent the formation of rust and mineral deposits, which can clog the sprinkler and reduce its effectiveness.
- Heat resistance: Bronze has good heat resistance, allowing it to withstand high temperatures generated by the water passing through the sprinkler. This quality makes bronze sprinklers suitable for use in areas with intense sunlight or hot climates.
- Weight and stability: Bronze sprinklers tend to have a relatively heavier construction compared to plastic sprinklers. This added weight contributes to their stability, preventing them from shifting or moving during operation, even in windy conditions.
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
The WER 3/8-16 x 1 HHC Stainless w/1w – Knife Arm Fastener (TSF-PUR-000166) is engineered to securely mount knife arms in WER chopper assemblies. Manufactured from high-quality stainless steel, this fastener provides exceptional strength and resistance to corrosion, making it ideal for harsh manure and slurry pump environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
3/8" O-Ring specifically designed to seal the connection between aluminum tubing and Bolt-On Couplers. Made of long lasting, durable rubber. Fits all 2", 3", 4", 5", or 6" O-Ring Bolt-On Couplers. Check out all of our commercial grade irrigation gaskets.
-
Sale!A 4 x 2 Slip Rigid Saddle Tee is a fitting used in irrigation systems to create a branch line connection from a larger 4-inch main pipeline to a smaller 2-inch outlet. This component allows water to be distributed efficiently from the mainline to lateral lines or other irrigation components.
-
This 4-Bolt Steel Flange for MZ Brass Slide Valve is an accessory for 4", 6", or 8" MZ Brass Slide Valve.
-
Sale!
4" Hose Male x 6" X UB/RL - Galvanized - w/gasket. This can be used for Band and Latch or Ringlock fittings.
Female Universal Ringlock Coupler x Hose Barb Male. Designed to enable customers to fabricate rubber hose assemblies. Multiple ring hose ends available for high pressure. Gasket included. *Be sure to check out our full line of Band and Latch Fittings! Brand Name: Pierce
-
4" Shug Grip Single Bolt Clamp
For an overview of the different types of clamps available visit the following video:
Clamps Explained!
-
Sale!4" Widecut Vine Curl for 0.830" O.D. Tubing. Used to attach tubing to the wire. Sold in packs of 50 each. Additional sizes available by special order.
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 4″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
The WER 4000 Series Wear Plate (TRI-MACH-002143-REV-1) is engineered to deliver maximum protection and durability for your manure and slurry pumps. Designed to guard against abrasion and wear caused by fibrous and abrasive materials, this heavy-duty wear plate extends the life of critical pump components. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!This 45 Degree Band & Latch Elbow allows a 45 degree change in direction from the main supply line. Gasket is included. *Be sure to check out our full line of Band & Latch Fittings!* Brand Name: Pierce
-
Sale!These 45 Degree black sweeping elbows are made of 14 gauge material. Brand Name: Pierce
-
Sale!Thrust-Blocking PVC Pipe
- Water under pressure exerts thrust forces in piping systems at: changes in pipe size or direction, dead ends and valves.
- The design of thrust-blocking requires knowledge of the thrust generated and the bearing strength of the soil against which the thrust block will be placed.
- To be effective, a thrust block must:
- be placed against undisturbed or fully compacted earth.
- contact the fitting over a sufficiently large area so as not to create stress points on the fitting.
- have sufficient area on the soil to restrain the thrust without exceeding the bearing strength of the soil.
- Supply line 3" in diameter and larger shall receive concrete thrust blocks. Please research specifications for amount of concrete to be used for thrust block.
-
45 Degree Elbow - Schedule 10 - Carbon Steel Weld Fitting - 4" 45 Degree Elbow = 4" OD, 3 5/8 ID 6" 45 Degree Elbow = 6" OD, 5 1/2" ID 8" 45 Degree Elbow = 8" OD, 7 1/2" ID
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
45 Degree Mitered Welding Elbow. Made out of a heavy-duty and durable 10 gauge steel. Seams are precision welded to meet your expectations. *Be sure to check out our full line of Steel Fabrication Parts!
-
Sale!45 Degree Poly Street Elbow. Made of heavy-duty and durable polypropylene. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
This 45 Degree Ringlock Elbow allows a 45 degree change in direction from the main supply line. Gasket is included. Heavy Duty Aluminum! *Be sure to check out our full line of Ringlock fittings!* Brand Name: Travis Pattern
-
Sale!This 45 Degree Ringlock Elbow allows a 45 degree change in direction from the main supply line. Roundback gasket is included. Heavy duty galvanized aluminum! Please note…the 4″ and 6″ elbows are sweeping, however, the 8″ elbows are mitered. *High-quality Pierce brand aluminum pipe fittings are ductile, corrosion resistant, and flexible. *Pierce aluminum fittings are weather resistant and economical. *Aluminum pipe fittings have natural anti bacterial properties and an easy to clean nature. *Manufactured with female/male end fittings *Be sure to check out our full line of Ringlock Fittings!* Brand Name: Pierce
-
Sale!Sure-Flo aluminum elbows are sealed by the compression of a rubber gasket which is ample in size to assure a seal without excessive tightening. The elbow may be connected and disconnected repeatedly without replacement of the gasket. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
Aluminum 45 degree welding elbow. Made of high quality cast aluminum.
- 3" Dimensions: O.D. = 3" and I.D. = 2.75"
- 4" Dimensions: O.D. = 4 3/8" and I.D. = 4"
- 5" Dimensions: O.D. = 5 3/8" and I.D. = 5"
- 6" Dimensions: O.D. = 6 1/2" and I.D. = 6"
- 8" Dimensions: O.D. = 8 5/8" and I.D. = 8"
-
45 Degree Welding Elbow - Schedule 40 Available in 3", 4", 5", 6", 8", & 10" sizes Brand Name: Matco Norca
-
Galvanized steel 45-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
The 4NHTB Suction Cover Ring (410 Stainless) is a durable, corrosion-resistant component designed to enhance the efficiency and reliability of irrigation or water management pumps. Its precision fit and robust construction make it essential for maintaining smooth pump operation in agricultural, industrial, and municipal applications. If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 5″x5″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Missing a Lynch Pin to your Shug Grip Heavy Duty Ringlock Clamp? These quick disconnect fasteners are designed with a solid pin and self-locking ring. This ring allows the pin to be securely held in place and provides an easy grip for quick removal.
-
Sale!Please call 517-458-9741 for the very best shipping rates on this product!
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
