-
#7 Berkeley Diaphragm - Height 2 5/8" (bottom to top of lip) x 6 3/4" Outside Diameter Top (outside of lip to outside of lip) x 5 1/2" Diameter Base Bottom (outside of lip to outside of lip).
-
* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F.
-
1" Insert x 3/4" MPT Adapter is used to couple a 1" rigid hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1" O.D. (outside diameter) opening to a 3/4" O.D. Previous SKU: G-00171 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order two at a time. If you are ordering three or more rolls, please call 517-458-9741 for other shipping options.
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
Previous SKU: G-00171This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
1" Stem w/ Solid Yoke for 8" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer!
-
1/2" - 3/4" - 1" Sizes of 100' - Clear Vinyl Tubing Available for purchase
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Sale!The right air hose can help simplify a lot of chores in your operation. What should you be looking for in a quality air hose? CLICK HERE to learn about the 10 things to look for when buying air hoses for commercial use. Mandals Mantex is a lightweight, yet rugged and hard-wearing hose. It is made from a blend of nitrile rubber and PVC, with an added UV barrier to prevent damage from UV radiation. Mandals Mantex HP is a world-class agricultural lay flat air hose designed for compressed air at high working pressures, while still offering a lightweight solution that is easy to deploy and store. An ideal agricultural air hose!
- Mandals Mantex Air Hose with Dixon GJ Boss Female Coupling with Polymer Seat
- Plated Iron
- .55lbs/ft
- 600 PSI Pressure Rating
- 2535 Burst Pressure Rating
- Wall Thickness .17in
- Tensile Strength 31,700 lbs
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Easy On/Off hose connections. Positive seals. Quick & easy assembly. Maximum operating pressure 300 PSI.
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Please call 517-458-9741 for the very best shipping rates on this product!
-
3/4" Lock Nut Item 6 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Stem w/ Solid Yoke for 3" to 4" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Stem w/ Solid Yoke for 5" to 6" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Venturi Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer
-
4" Widecut Vine Curl for 0.830" O.D. Tubing. Used to attach tubing to the wire. Sold in packs of 50 each. Additional sizes available by special order.
-
Galvanized steel 45-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
Please call 517-458-9741 for the very best shipping rates on this product!
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
-
Bauer Type "F" Style Galvanized Female Socket with Lever x Hose Barb The Steel Bauer Type "F" Style Galvanized Female Socket with Lever x Hose Barb is typically used with the Bauer Type “F” Style Galvanized Male Ring x Hose Barb. Please contact us for more information.
-
COUPLER HD SEGMENT SETS
- 0.900" center to center
- Nut and bolt
- Following sizes are available: 4", 4.5", 5", 5.5", 6", 7", 7.25", 8", 10" and 12"
- Type III hardcoat anodized or plain aluminum
-
Wear Ring, Wear Ring for 6NHTB, 6NHTB also uses 27-A22440-6-SG that Fits in Suction Cover
-
- Precision machined to Cornell specs
- High chrome white iron castings (460 BHN hardness)
- Metal 360 Inc is in no way affiliated with Cornell Pump
-
-
Wear Ring, Fits in Suction Cover, Wear Ring for 6NHTB, 6NHTB also uses 27-A2441-6-SG
-
This hand held watering nozzle's design allows adjustment to the exact pattern of your lawn; ensuring the landscape is precisely watered with minimal overspray waste. 8 Spray patterns:
- Shower
- Mist
- Soaker
- Angle
- Center
- Flat
- Cone
- Jet
-
Sale!8" Female x 10.25" Female Shug Grip Reducer HF Brand Name: Metal 360
-
8" Female x 10.25" Male Shug Grip Reducer HF/ US coupling Brand: Metal 360
-
Sale!8" Male x 10.25" Male Shug Grip Reducer HF Brand Name: Metal 360
-
This is used to repair PVC. Includes gaskets. Brand Name: Pierce
-
90 Degree Street Elbow Female Pipe Thread x Male Pipe Thread, SCH 40 PVC (3 Sizes Available - See Options)
-
Galvanized steel 90-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
Durable: Nitrile rubber cover increases resistance to oil, fuel, most chemicals and petrochemicals; and stands up to ozone and oxidation. Rugged: 100% high tenacity yarn, extruded with thru-the-weave nitrile rubber construction for strength and greater flow. Service Worthy: Light weight allows for fast deployment and retrieval, saving time and money. High-Performance: Rubber construction delivers maximum durability, flexibility and service life. Tested: Performance rated at -5°F to 200° F (-20°C to 93°C). Certified: Manufactured within the scope of our ISO-9001: 2015 certified quality assurance system. AG FEEDER HOSE LAY-FLAT NITRILE RUBBER HOSE
CONSTRUCTION Extruded Nitrile Cover/Liner Polyester/Nylon Reinforcement
TEMPERATURE RANGE -5° to 200°F (-20° to 93°C)
STANDARD LENGTH 660' (200M) HOSE COLORS - Black
AG Data Sheet DownloadFor pricing and availability call in today and speak with one of our Sales Associates. -
Weld-on High Pressure Ringlock. Heat treated, heavy duty cast aluminum coupler. Recommended when high pressures are required. Brand Name: Travis Pattern
-
Sale!This maintenance kit is for 2" and 3" Mini Sigmas. This maintenance kit includes the following parts:
- Item 11 - Nozzles (6)
- Item 6 - Hydraulic Seal (1)
- Item 10.1 - O-Ring Seal (1)
- Item 12.1 - O-Ring Seal (2)
- Grease Tube (1)
Click Here to view the complete Amiad Mini Sigma Parts List with a diagram.
-
Sale!This maintenance kit is for a 4" Mini Sigma. This maintenance kit includes the following parts:
- Item 11 - Nozzles (6)
- Item 6 - Hydraulic Seal (1)
- Item 10.1 - O-Ring Seal (1)
- Item 12.1 - O-Ring Seal (4)
- Grease Tube (1)
Click Here to view the complete Amiad Mini Sigma Parts List with a diagram.
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
Premium Row Crop Drip Tape Note: This is a special order item and ships directly from the manufacturer. For more details, please call us at 517-458-9741. Next generation Tru-Flo turbulent flow pathway technology—the result of over 35 years of turbulent flow research, development and manufacturing from Bowsmith. • Unsurpassed clog resistance is achieved when combined with the innovative and unique water inlet filters design. • The superior technology of BigFoot 3.0 delivers reliability, uniformity and maximizes crop yields. • The BigFoot 3.0 continuous precision molded flow path and seamless construction, provides both strength and reliability during installation and retrieval. • Available in 0.05 to 1.50, Q/100 (gpm/100 ft) flow rates. • Available emitter spacing (in) of 4, 6, 8, 12, 16, 18, 20, 24. - No additional cost for closer emitter spacing. • Various wall thickness (mil) available for seasonal, or multi-season (SDI) applications. • The precision cut, outlet slit, provides superior protection against soil ingestion and root intrusion. • Bright white stripes “up” insures proper outlet placement, and makes it easy to find for the field workers. • No other drip tape matches the performance of BigFoot 3.0. General Specifications: Flow Rates (GPM/100ft) @ 8 psi .05, .06, .07, .08 .10, .11, .12, .13, .17, .19, .20, .22, .23, .25, .26, .34, .35, .38, .45, .52, .67, .75, 1.05, 1.34 Standard Spacings (in) 4, 6, 8, 12 Additional Spacings (in) 16, 18, 20, 24 Nominal Diameters (in) 5/8, 7/8 5/8 Tape Wall Thickness (mil) 5, 6, 8, 10, 12, 15 7/8 Tape Wall Thickness (mil) 5, 6, 8, 10, 12, 15 Outlet Knife Cut Slit Product Guide BigFoot_DripTape_p2 Product Configurations BigFoot_Brochure_3 Run Length Guides BigFoot_DripTape_p4
-
“PCI” Series Pressure Compensating Inline Drip Tubing Note: This is a special order item and ships directly from the manufacturer. For more details, please call us at 517-458-9741.
- Features: Unique flow regulating concept: wide effective labyrinth, leading into the flow control chamber, where a sensitive floating diaphragm regulates and maintains a constant flow rate at variable inlet pressure. Uniform flows from 7-60 PSI. Manufactured from high-quality resins. Contains a minimum of 2% carbon black. Available in standard, custom, or skip spacing.
-
“PCI” Series Pressure Compensating Inline Drip Tubing Note: This is a special order item and ships directly from the manufacturer. For more details, please call us at 517-458-9741.
- Features: Unique flow regulating concept: wide effective labyrinth, leading into the flow control chamber, where a sensitive floating diaphragm regulates and maintains a constant flow rate at variable inlet pressure. Uniform flows from 7-60 PSI. Manufactured from high-quality resins. Contains a minimum of 2% carbon black. Available in standard, custom, or skip spacing.
-
The Bowsmith NonStop emitter design, patented in 1974, is based on a simple unique principle found in no other emitter. This Pressure Cascade Principle permits the emitter to tolerate large amounts of suspended solids in irrigation water, without clogging and without the need for fine-mesh filter screens.
For over 40 years, millions of Bowsmith NonStop emitters have demonstrated that the unique NonStop Continuous Flushing Action (Pressure Cascade Principle) really works, even under conditions that would quickly clog ordinary emitters. With only 30-mesh filtration, Bowsmith NonStop emitters have operated successfully with water containing heavy concentrations of sand, silt, iron bacteria "slime", calcium carbonates, even algae and moss.
To the grower and contractor this means:• Reduction in plant loss and stress.
• Lower capital investment in filtration equipment.
• Lower labor costs for filter maintenance and overall system maintenance.
The use of very fine mesh screen (140 - 200 mesh) filtration that is necessary for
ordinary emitters is not recommended for Bowsmith NonStop emitters.
Why? Because of the necessity for frequent cleaning of the filters. -
Available with EPDM or FKM (viton type) gasket. Double-sided female NPT threads.
-
Call for special pricing today! Ask for Cedric. 517-458-9741 Details
- Hose I.D, & Length: 4″ x 1250′
- G.P.M: 400 – 600
- Axle: 2-C
- Weight: 8,800 lbs.
- Honda OHV 5.5 HP Engine
- Automatic Gun Cart Stop
- Disc Brake to Prevent Hose Recoil
- Slewing Ring Turntable
- Hose Build-Up Safety Switch
-
Galvanized steel riser valve tee works perfectly as an in-line valve for air relief. Manufacturer warranty included. Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6" Riser measures 6 5/8" Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. d. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Sale!
Only one left! First one to order is the winner!
- Compact, reliable PTO pump capable of 50 to 350 gpm with corresponding pressures of 90 to 74 psi using a 8 to 20 hp power take off
- Designed with industry leading oil lubricated step-up gearbox (no belts or pulleys) with shafts supported by widely spaced bearings
- Easily replaceable packing gland type water seal
- 1 3/8 six spline PTO shaft
- Suction: 3” NPT (F)
- Discharge: 2” NPT (F)
- Length 62 Inches
- Width: 48 Inches
- Height: 36 Inches
- Weight: 220lbs
-
Clog-Buster Drain Flusher
- Unclogs drain pipes in seconds
- Simply remove aerator from spigot or faucet and attach faucet adapter
- Attaches to standard garden hose fitting
- Insert clog buster as far as possible into drain and slowly turn on the cold water - clog should dislodge almost immediately
- Eliminates need for using chemicals
-
Chevron Rubber Gasket for 3" to 6" Item 4 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Chevron Rubber Gasket for 8" Item 4 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Clamp Lock Bolt 1/4" by 3 1/2" Item 8 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Cornell irrigation and manure handling pumps are constructed with top quality materials. Made up of Cast Iron, bronze fitted, or all iron construction, Cornell's pumps meet or exceed optimum efficiency standards for centrifugal pumps. Other options are available for pumps required to move abrasive or caustic materials. Standard features include balanced impellers, heavy duty shafts, replaceable shaft sleeves, and replaceable wear rings or wear plates. In addition to the bulletproof design of their standard pumps, Cornell's legacy manure pumps are specifically designed for coarse abrasive slurry applications such as manure, sand, and gravel. Additionally, Cornell Pumps:
- Optionally fitted with Cornell's patented Run-Dry and Redi-Prime systems.
- Outfitted with an array of different impeller options and cutters.
- Can be outfitted with standard packing or mechanical seals.
- Available in frame mount, engine mount, or close coupled with an electric motor.
- Pump discharges can be oriented to customer specifications.
- Larger models feature a "Double Volute"
- Suction inlets are smooth and contoured for improved hydraulic performance.
-
Dosatron fertilizer injectors can be used in a variety of installations and configurations. Mount them on booms or benches. Increase your flow with parallel installations, or inject multiple nutrients with series installations. It’s all up to you! Examples
Aquaponics
Indoor Farming and Agriculture
Stacked Farming
Urban Gardening and Farming
Drain-to-Waste- Connection Size: 3/4" NPT
- Percentage Range: 0.2 to 2%
- Unit Weight: 6 lbs
- Ounces Per Gallon Range: 0.256 to 2.560
- Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
- Pressure: 4.3 to 85 PSI
- Dimensions: 19 1/8" x 6 5/16"
- Ratio Range: 1:500 to 1:50
-
WHAT DO DOSATRON FERTILIZER INJECTORS ACCURATELY INJECT?
Fertilizer - Nutrients - Beneficials
Organics - Fish Emulsion - Teas
Chlorine - Sanitizers (special models)
Insecticides- Fungicides - Herbicides
Plant Growth Regulators (PGRs for drenching)
Wetting Agents - Algicides- Acids
Dilution Range: 1:500 to 1:66 (.2% to 1.5%)
Water Flow Range: .4 to 20 GPM
Operating Pressure Range: 7 to 70 PSI
Available Housing Materials: Polyacetal (Standard Blue)
Dimensions: 24” x 7 1/2”
Weight: 8 lbs
Connection Size: 1” NPT
Maximum Temperature: 104o F
Ounces Per Gallon Range: 0.256 to 1.829
Included Accessories: 6 ft clear suction tube, strainer, weight, mounting bracket and operating manual
See the D45RE15 Dosatron Industrial Plumbing Assembly Instructions
Check out the D45RE15 Dosatron Injector Owners Manual
Simple maintenance - view the D45RE15 Dosatron Injector Schematics
Recommended Accessories: 200 mesh filter, check valve, pressure regulator, flow restrictor. -
Drip Tubing (100′ Roll) with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 100 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .5 GPM/100’. The tubing is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. If your garden is in between the sizes of our Drip Irrigation Garden Kits, you can add extra tubing and Tape-loc fittings to customize the irrigation system to your needs.
-
Certified compostable biodegradable mulch film Finally, there is a product that provides the benefit of mulch film, without the expense of having to pick it up after each season. Since it is fully compostable and biodegradable, you can simply till it into the soil where it breaks down into its natural base components. FilmOrganic provides the most complete line of soil-compostable biodegradable mulch films available on the market. They are the only company to offer mulch films with a predictable lifespan. The technology is proprietary and their processes unique. The mission is to give farmers the opportunity to increase their yield with environmentally friendly compostable biodegradable mulch film that won’t damage their soil. FilmOrganic started in 2014 with over 100 growers. No polyethylene. No plastic. True compostable biodegradable technology with a promise to make it affordable for growers. Benefits:
- Predictable Lifespan: Tailor the mulch to your crop for a reliable and predictable lifespan.
- Wind Resistance: FilmOrganic contracts to the bed, ensuring it stays securely in place, even in windy conditions.
- Yield Enhancement: Optimize heat unit management to minimize stress and boost crop yield.
- Certified Biodegradability: Certified film that biodegrades through soil microorganisms, promoting environmental sustainability.
- Over-Winter Barrier: Specialized over-winter biodegradable weed barrier for effective seasonal protection.
- Mechanized Cleaning Efficiency: Enhance productivity with mechanized cleaning processes for more efficient operations.
MULCH FILM DESIGNED FOR VEGETABLES PRODUCTION
Other sizes available. Call 517-458-9741 for details or email us at info@triplekirrigation.com!Series Surface lifespan in months Bed height (inches) Width Length Application Black 36 3 6 48'' 4000' General purpose 58 5 6 48" Coldest climates 66 6 6 48'' 4000' Tomatoes 88 8 8 48'' 4000' Double crop, rough ground CoolWhite 66 6 6 48'' 4000' Late tomatoes and peppers 88 8 8 48'' 4000' Double crop, rough ground -
Certified compostable biodegradable mulch film Finally, there is a product that provides the benefit of mulch film, without the expense of having to pick it up after each season. Since it is fully compostable and biodegradable, you can simply till it into the soil where it breaks down into its natural base components. FilmOrganic provides the most complete line of soil-compostable biodegradable mulch films available on the market. They are the only company to offer mulch films with a predictable lifespan. The technology is proprietary and their processes unique. The mission is to give farmers the opportunity to increase their yield with environmentally friendly compostable biodegradable mulch film that won’t damage their soil. FilmOrganic started in 2014 with over 100 growers. No polyethylene. No plastic. True compostable biodegradable technology with a promise to make it affordable for growers. Benefits:
- Predictable Lifespan: Tailor the mulch to your crop for a reliable and predictable lifespan.
- Wind Resistance: FilmOrganic contracts to the bed, ensuring it stays securely in place, even in windy conditions.
- Yield Enhancement: Optimize heat unit management to minimize stress and boost crop yield.
- Certified Biodegradability: Certified film that biodegrades through soil microorganisms, promoting environmental sustainability.
- Over-Winter Barrier: Specialized over-winter biodegradable weed barrier for effective seasonal protection.
- Mechanized Cleaning Efficiency: Enhance productivity with mechanized cleaning processes for more efficient operations.
MULCH FILM DESIGNED FOR VEGETABLES PRODUCTION
Other sizes available. Call 517-458-9741 for details or email us at info@triplekirrigation.com!Series Surface lifespan in months Bed height (inches) Width Length Application Black 36 3 6 48'' 4000' General purpose 58 5 6 48'' 4000' Coldest climates 66 6 6 48" Tomatoes 88 8 8 48'' 4000' Double crop, rough ground CoolWhite 66 6 6 48'' 4000' Late tomatoes and peppers 88 8 8 48'' 4000' Double crop, rough ground -
End cap without air relief and end cap with 2" air relief. Galvanized steel Various sizes all with 42" Length Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Durable T Pipe for underground irrigation systems. Simple and fast connections. Multiple sizes available. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Galvanized Steel Z Pipe Short Base Underground Riser: Female or Male Top galvanized steel underground riser with manufacturer warranty. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Handle with Collar for 3″ to 6″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Handle with Collar for 8″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Eng Plug Galvanized, IPS Underground, Pierce (4" and 6" options available Brand Name: Pierce
-
The Irrigator Hand Nozzle with 8 Spray Patterns with comfortable rubber grip
- Shower
- Flat
- Jet
- Mist
- Cone
- Soaker
- Center
- Angle
-
This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .25 GPH per Emitter/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: 50-11703437 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Are you looking for a mesh filter to prevent debris from passing into your 3/4" water hose line?
The Irritec Mesh Screen Filter is an excellent choice. Irritec outfits these 3/4-Inch Hose Thread T-Filters with a 150-mesh stainless-steel screen. One side of the filter has a female hose swivel and the other has a male hose thread. Irritec T-Filters are excellent for connecting tubing to pumps, filters, or other irrigation projects. These filters fit onto any hose bib or garden hose end. Use them wherever your system requires a 90-degree turn in the head assembly components. Unfiltered water enters the T from the female side, passes through the internal filter, and exits through the exit point on the side of the filter. Irritec designs all its irrigation supplies with quality and versatility in mind. These handy T-filters make it easier than ever to customize your irrigation setup to fit your unique needs! -
Sale!Drip tape is a pipeline with an emitter manufactured inside the pipeline. It is a thin-walled tube rather than a structure pipe, with the common wall-thickness being 0.2mm (8mil) and is usually considered a seasonal product used in market gardens or rows of crops. It is different than drip tubing, which is more durable and designed to be left in the field. Roll Integrated extrusion technology The flat dripper, barely 2mm thick, is welded to the wall of the hose, resulting in practically zero water loss. The filter at the entrance to the dripper, with eight flow holes, eliminates the possibility of clogging. The turbulent flow labyrinth, adapted to give an even flow rate, prevents sedimentation even at low working pressures. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Sale!IRRITEC irrigation systems guarantee the maximum efficiency with the least environmental impact and at a reasonable cost. This makes life easier for the people cultivating fields and tending to our crops. Agriculture is more than work; it is our passion. As agriculturalists, we ensure every drop is applied as efficiently as possible, while minimizing the ecological footprint and ensuring proper nutrition to the field. Drip Tape with built-in emitters spaced every 8 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 8000′ feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .25 GPH per emitter Extra Discounts available for Pallet Quantities. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Please Call today for more information. Limited quantities available! PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU!
-
Sale!
Irritec P1 Drip Tape 7/8″ 8 Mil 12″ Spacing 0.25 GPH Per Emitter 6000′ Roll Save 22% with Pallet Pricing (As Low As $130.34 Per Roll)
Special Pricing on Pallet Quantities while supplies last. 16 Rolls Per Pallet. Regular Price $162.92. Sale Price $130.34 per roll. Or $2085.44 per pallet PLUS FREIGHT. Call 517-458-9741 for a custom freight quote and to place your order. Irritec irrigation systems are the solution for a substantial increase in the beneficial application of water for agriculture ensuring increased irrigation efficiency. Drip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 6000' feet in length. It measures 7/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .25 GPH/100’. Extra Discounts available for Pallet Quantities. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Irritec drip systems feature outstanding uniformity and unrivaled performance. The exceptional quality of Irritec manufacturing ensures the application of the right amount of water. Drip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 6000' feet in length. It measures 7/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .17 GPH/100’. Extra Discounts available for Pallet Quantities. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
2" Flange x Female Coupler 
