-
Carbon Steel Welding Wye - Schedule 40 3", 6" and 8" available to be shipped via UPS. 10" in stock and ready to ship via freight truck due to weighing over 100 pounds each. Please call for a freight quote.
-
Carbon Steel Welding Tee - Schedule 40 4", 5", 6" 8" and 10" available to be shipped via UPS. 10" in stock and ready to ship via freight truck if ordering more than one due to its weight. Please call for a freight quote. Brand Name: Matco Norca
-
Sale!This 45 Degree Companion Flange Foot Valve is made out of lightweight and durable aluminum. This foot valve matches the bolt pattern of a standard 125 pound cast iron companion flange or a schedule 80 PVC flange. Ample space is provided for the valve flapper to get out of the water stream, and the full size opening means minimum friction loss. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
Standard (45 Degree) Companion FlangePart No. Height Width Weight Screen Ht. Screen Dia. Open Area Seat Bolts Req'd Screen Bolts Req'd Screen Bolt Dim. Flange Bolts SFV2-CF 12-1/2 6 6-1/2 2-5/8 5 16 3 (3) 1/4 x 4 4 (not provided) SFV3-CF 13 7-1/2 9 4-1/2 6 34 4 (3) 1/4 x 6 4 (not provided) SFV4-CF 17 9 15 6-1/2 7-1/4 61 5 (3) 1/4 x 8 8 (not provided) SFV5-CF 18-1/2 10 19-1/2 7-3/8 8-3/8 78 7 (3) 1/4 x 9 8 (not provided) SFV6-CF 21-1/2 11 23 8-3/8 9-1/4 97 8 (3) 1/4 x 10 8 (not provided) SFV8-CF 29 13-1/2 41 13-1/2 11-1/4 190 11 (3) 1/4 x 15-3/8 8 (not provided) SFV10-CF 39 17 58 21 13-5/8 359 12 (4) 1/4 x 22-7/8 12 (not provided) *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Watch our video: Foot Valves Explained
Brand Name: Sure-Flo Fittings
-
Sale!
Watch our video: Foot Valves Explained
This 45 Degree Female Thread Foot Valve is made out of lightweight and durable aluminum. This 45 degree foot valve attaches to a NPT thread end; hose, steel pipe, or PVC. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.Head Pressure for Foot Valve
Standard (45 Degree) Female ThreadPart No. H W Lbs Screen Ht. Screen Dia. Open Area Seat Bolts Req'd Screen Bolts Req'd Screen Bolt Dim. Flange Bolts SFV2-FP 10 7 5 2-5/8 5 16 3 (3) 1/4 x 4 0 SFV3-FP 13 8 8 4-1/2 6 34 4 (3) 1/4 x 6 0 SFV4-FP 16-1/2 10 11 6-1/2 7-1/4 61 5 (3) 1/4 x 8 0 SFV5-FP 18 11 16 7-3/8 8-3/8 78 7 (3) 1/4 x 9 0 SFV6-FP 21 11-1/2 18-1/2 8-3/8 9-1/4 97 8 (3) 1/4 x 10 0 SFV8-FP 27 14 32 13-1/2 11-1/4 190 11 (3) 1/4 x 15-3/8 0 SFV10-FP 36 16 46-1/2 21 13-5/8 359 12 (4) 1/4 x 22-7/8 0 *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Brand Name: Sure-Flo Fittings
-
Sale!A Foot Valve 45 Degree OD Tubing is a specialized valve installed at the bottom of a suction line in irrigation or water transfer systems. It is designed to maintain pump priming by preventing water from flowing back out of the line when the pump is not in operation. The 45-degree orientation allows for smoother flow dynamics, reducing resistance and improving efficiency.
Benefits:
- Prevents Backflow: Ensures that water stays in the suction line, keeping the pump primed and ready for operation.
- Efficient Pump Operation: Reduces the time and effort needed to reprime the pump, saving energy and minimizing downtime.
- Smoother Flow: The 45-degree angle promotes efficient water entry and reduces turbulence, enhancing overall system performance.
- Protects the System: Acts as a strainer to prevent debris and sediment from entering the pump, reducing wear and tear.
- Durability: Typically constructed from corrosion-resistant materials to withstand harsh agricultural conditions and extended use.
Functionality:
- Installed at the suction point of a pipeline, the foot valve opens when the pump is operating, allowing water to flow through.
- When the pump stops, the valve closes automatically, preventing water from draining back and ensuring the line remains full.
-
Sale!This Vertical Companion Flange Foot Valve is made out of lightweight and durable aluminum. Ample space is provided for the valve flapper to get out of the water stream, and the full size opening means minimum friction loss. This foot valve matches the bolt pattern of a standard 125 pound cast iron companion flange or a schedule 80 PVC flange. The hump on the body must face up when it is used in a horizontal or near horizontal position. Please see the chart for available sizes. We can get the 10" and 12" from our vendor but we have to call to get cost, freight costs and estimated ship times. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
Vertical Companion Flange Foot ValvePart No. Height Width Weight Screen Ht. Screen Dia. Open Area Seat Bolts Req'd Screen Bolts Req'd Screen Bolt Dim. Flange Bolts SFVV2-CF 7-3/4 6 6 2-5/8 5 16 3 (3) 1/4 x 4 4 (not provided) SFVV3-CF 11 7-1/2 7-1/2 4-1/2 6 34 4 (3) 1/4 x 6 4 (not provided) SFVV4-CF 15 9 15 6-1/2 7-1/4 61 5 (3) 1/4 x 8 8 (not provided) SFVV5-CF 17-1/2 10 21 7-3/8 8-3/8 78 7 (3) 1/4 x 9 8 (not provided) SFVV6-CF 19 11 21 8-3/8 9-1/4 97 8 (3) 1/4 x 10 8 (not provided) SFVV8-CF 28 14 44 13-1/2 11-1/4 190 11 (3) 1/4 x 15-3/8 8 (not provided) SFVV10-CF 37 17 61 21 13-5/8 359 12 (4) 1/4 x 22-7/8 12 (not provided) SFVV12-CF 55 22-1/2 132 36 22 972 16 (4) "1"" alum. pipe" 12 (not provided) *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Watch our video: Foot Valves Explained
Brand Name: Sure-Flo Fittings -
Sale!
Watch our video: Foot Valves Explained
To be used with Sure-Flo Self-Cleaning Strainers. They can be used with a single drive or dual drive model. A conversion tube connects the foot valve to the strainer. The conversion tube easily slides over the strainer neck and is firmly secured with pre-installed stainless bolts. This foot valve matches the bolt pattern of a standard 125 pound cast iron companion flange or a schedule 80 PVC flange. On one end there is a conversion tube and on the other end is ANSI 125 lb Flange. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.Head Pressure for Foot Valve
*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Brand Name: Sure-Flo Fittings -
Sale!
Watch our video: Foot Valves Explained
Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.Head Pressure for Foot Valve
-
Sale!Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
-
These products are Currently Out of Stock!CALL 517.458.9741FOR NEW AND IMPROVED OPTIONS!Ask for Cedric
Special Pricing on Mandal's 6" 660' DRX Drag Hose when you buy 3 or more. Call for details 517-458-9741
Mandals Dragman Drag Hose (also known as Sludge Injection Drag Hose) is manufactured for umbilical drag systems. They are used for distribution of slurry and manure in agricultural fields. Drag Hoses are connected between slurry reservoirs (lagoons) and tow tractors. Mandals Dragman Drag Hose is the preferred dragline hose we offer because they offer the highest abrasion resistance and tensile strength and they offer environmentally friendly and safe manure distribution. A premium product offering both durability and wear resistance, they will save you time and money over the long haul. FEATURES- Designed for umbilical drag system used for distribution of slurry and manure in agricultural fields.
- Engineered with extreme tensile strength and abrasion properties. High tenacity filament polyester yarn .
- Covered and lined with Thermoplastic Polyurethane (TPU).
- Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave.
- Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure.
- Ultimate tensile strength and adhesion level polymer to weave.
- Enhanced abrasion resistance.
- High diameter and extension stability.
- Low kink radius.
- High puncture resistance.
- Temperature range -50ºC to +75ºC (pure water) (-58 ºF to +167 ºF).
- Standard lengths depending on diameter.
- Excellent UV and weathering resistance.
Manufacturer: Fenner MandalsCALL 517.458.9741 FOR TODAY’S SALE PRICEAsk for Cedric or simply fill out the form below! -
CALL 517.458.9741FOR TODAY'S PRICEAsk for Cedric Available in 8", 10", 12" Diameter in lengths of 660' Mandals Superman High Volume Transfer (HVT) is our market-leading all-purpose hose for fluid transfer. Not only is Superman HVT designed for higher working pressures when transporting fluids, the hose is also heavily reinforced with exceptional resistance to abrasion and cutting. This is a hose you can rely on for a lifetime.Mandals Superman HVT has full-diameter recovery after pressure release and is resistant to a wide range of chemicals. To prove that this hose can operate in the most demanding situations, it was developed with excellent hydrolysis and fungus resistance, along with great resistance to weather, UV, and Ozone. Superman HVT is leakproof and tested in sections up to 200m. Mandals Superman HVT is designed with premium thermoplastic polyether-based polyurethane (TPU) and is extruded with our state-of-the-art “through the weave” extrusion technology. The heavily reinforced and stabilized weave combined with great abrasion and puncture resistance makes for a hose you can rely on.Lengths and DiametersADVANTAGESWe offer a range of diameters and lengths for this hose, depending on the version. The diameters range from 127mm (5") to 305mm (12"), and for some diameters, the hose can be delivered in lengths up to 200m.* *Longer lengths are available on special request for certain diameters.Operating TemperatureThe hose has been developed to perform in different weather and environments, with an operating temperature from -50°C to + 75 °C ( -58°F to +167°F) for pure water.Color Options - Black (standard)
- High Diameter and Dimension Stability
- Great Adhesion and Tensile Strength
- Minimal Snaking of Pressurized Hose
- Long Lifetime and Low Maintenance
- Easy to Deploy and Store
- High Abrasion and Kink Resistance
- High Puncture Resistance
- High Quality Materials
Product Specifications
Primary Uses and Applications- Fracking
- Long-distance water transfer
- Mining
- Emergency water removal during floods
- Industrial plants
- Refineries
- Tank farms
- Tank to ship vessels and vice versa
- Supply hose for large agricultural systems
- Heavy-duty firefighting systems such as fire monitors
Mandals Superman HVT Hose
Manufacturer: Fenner MandalsDon't forget to ask about Cornell Pumps. Cornell Pumps are widely used in the oil and gas industry, hydraulic fracturing, due to their exceptional uptime, dependability, and efficiencyCALL 517.458.9741 FOR TODAY’S SALE PRICEAsk for Cedric or simply fill out the form below! -
CALL 517.458.9741FOR TODAY'S PRICEAsk for CedricAvailable in 8", 10" and 12"
Product Specifications
Part # - M3FRV12 12” Victaulic Lay-flat Hose Coupler- 300 psi (tested pressure 900 psi)
- A356.2 aluminum barb
- A356.2 aluminum segment set
- Bolts, 3/8”-16 X 2” stainless
- Anodizing, MIL-A-8625 Type III Class 1 (optional)
- Victaulic clamp (not included in assembly)
- 14” outside diameter with TPU hose installed
- rated 300 psi (tested pressure 900 psi)
- 316 stainless steel barb
- A356.2 aluminum segment set
- Bolts, 3/8”-16 X 2” stainless
- Anodizing, MIL-A-8625 Type III Class 1
- Victaulic clamp (not included in assembly)
Manufacturer: Metal 360Don't forget to ask about Cornell Pumps. Cornell Pumps are widely used in the oil and gas industry, hydraulic fracturing, due to their exceptional uptime, dependability, and efficiency.CALL 517.458.9741 FOR TODAY’S SALE PRICEAsk for Cedric or simply fill out the form below! -
These products are In Stock!CALL 517.458.9741FOR TODAY'S SALE PRICEAsk for Cedric You may want to read the article "10 Tips For Selecting Mainline Hose for Manure Distribution". A great guide for buying Mainline Hose and then you will know why we recommend Mandal's Mainline Hose to our customers.Mandals is the preferred mainline hose that Triple K Irrigation offers for sale. We believe that Mandals hose offers the best value for the money when indexed across variables like durability and wear resistance. This means that Mandals hoses last longer in the field with fewer repairs or replacements. Mandals hose allows for rapid deployment and retrieval saving you time and effort. They also offer excellent flow rates and are resistant to most industrial and agricultural chemical, ozone and UV-rays. In short, when your business requires the very best, we believe that Mandals is the best option for mainline hose. FEATURES
- Transfer at higher than normal working pressures
- Lightweight and easy to deploy
- Ultimate abrasion and puncture resistance
- High diameter and extension stability
- Minimum snaking of pressurized hose
- Thermoplastic polyether based polyurethane (TPU)
- State of the art “through the weave” extrusion technology
- Heavily reinforced and stabilized weave, using high tenacity polyester filament yarns
- Excellent adhesion between cover/lining and the weave
- Full diameter recovery after pressure release
- Excellent hydrolysis and fungus resistance
- Resistance to a wide range of chemicals
- Temperature range -50 to 75 ºC (pure water)
- Excellent UV, Ozone and weathering resistance
- Leak proof tested section lengths up to 200 mts.
Mandals Mainline hose 6", 8" and 10" - Lengths 660'
Manufacturer: Fenner MandalsCALL 517.458.9741 FOR TODAY'S SALE PRICEAsk for Cedric or simply fill out the form below! -
Sale!This Vertical Female Thread Foot Valve is made out of lightweight and durable aluminum. This SURE-FLO aluminum foot valve is for use on hose, pipe or plastic pipe. The durable rubber flapper seats on a machined aluminum surface and provides a tight seal which minimizes leakage. Unlike the old fashioned leather flapper it does not dry out or shrink when out of service. Ample space is provided for the flapper to fold back out of the liquid stream thus keeping friction loss to a minimum. The hump on the body must face up when it is used in a horizontal or near horizontal position. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
Vertical Threaded Female NPT Foot Valve Pt # H W lbs Screen Ht. Screen Dia. Open Area Seat Bolts Req'd Screen Bolts Req'd Screen Bolt Dim. Flange Bolts SFVV2-FP 7-1/4 5-3/4 4 2-5/8 5 16 3 (3) 1/4 x 4 0 SFVV3-FP 10-1/2 7 5-1/2 4-1/2 6 34 4 (3) 1/4 x 6 0 SFVV4-FP 15 7-3/4 10 6-1/2 7-1/4 61 5 (3) 1/4 x 8 0 SFVV5-FP 17-1/2 9-1/2 16 7-3/8 8-3/8 78 7 (3) 1/4 x 9 0 SFVV6-FP 19-1/2 11 19 8-3/8 9-1/4 97 8 (3) 1/4 x 10 0 SFVV8-FP 28 14-1/2 33 13-1/2 11-1/4 190 11 (3) 1/4 x 15-3/8 0 SFVV10-FP 36-1/2 17 51 21 13-5/8 359 12 (4) 1/4 x 22-7/8 0 *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Brand Name: Sure Flo Fittings -
Sale!Vertical OD Tubing Foot Valve is made out of lightweight and durable aluminum. Ample space is provided for the valve flapper to get out of the water stream, and the full size opening means minimum friction loss. Especially suitable where the aluminum tubing used for suction is to be in a vertical position. However, this foot valve will also work where the tubing is at an angle or in the horizontal position. The hump on the body must face up when it is used in a horizontal or near horizontal position. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
Vertical O.D. Tubing Foot ValvePart No. Height Width Weight Screen Ht. Screen Dia. Open Area Seat Bolts Req'd Screen Bolts Req'd Screen Bolt Dim. Flange Bolts SFVV3 13-1/4 7 7 4-1/2 6 34 4 (3) 1/4 x 6 4 SFVV4 16-1/2 7-3/4 11-1/2 6-1/2 7-1/4 61 5 (3) 1/4 x 8 4 SFVV5 19 9-1/2 17 7-3/8 8-3/8 78 7 (3) 1/4 x 9 4 SFVV6 21 11 21 8-3/8 9-1/4 97 8 (3) 1/4 x 10 4 SFVV8 29 14-1/2 35 13-1/2 11-1/4 190 11 (3) 1/4 x 15-3/8 4 SFVV10 38-1/2 17 51 21 13-5/8 359 12 (4) 1/4 x 22-7/8 6* *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Brand Name: Sure-Flo Fittings -
Sale!Replacement Valve Flapper Gasket Assembly for your Foot Valve. Made of heavy-duty and durable steel. Includes gasket, weight, cover and bolt. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand: Sure-Flo Fittings
-
Sale!Replacement Valve Flapper gasket for your Foot Valve. Made of lightweight and durable rubber. Gasket Only - Weights not included. A Valve Flapper Gasket is a component commonly found in irrigation systems, particularly in check valves or flapper valves. Its primary role is to create a seal within the valve, ensuring that water flows in the correct direction and preventing backflow.
Key Features of a Valve Flapper Gasket:
- Material: Usually made of rubber, silicone, or other flexible and durable materials resistant to water, chemicals, and pressure.
- Shape: It often conforms to the valve's internal design, ensuring a tight fit to minimize leaks.
- Location: Positioned between the flapper (a hinged or flexible part that allows water flow) and the valve body.
How It Works:
- When water flows in the intended direction, the flapper lifts, allowing passage.
- The gasket ensures a watertight seal when the flapper closes, preventing water from reversing direction.
Benefits:
- Prevents Backflow: Essential for maintaining water quality and avoiding contamination.
- Improves Efficiency: Reduces water loss by minimizing leaks.
- Extends Valve Life: By providing a reliable seal, it reduces wear and tear on other valve components.
Applications in Irrigation:
Valve flapper gaskets are crucial in systems like:- Mainline check valves to prevent backflow into water sources.
- Pump discharge systems where reverse flow could damage equipment.
- Any irrigation setup that requires controlled water direction.
Maintenance Tips:
- Regular Inspections: Check for cracks, wear, or deformation.
- Replacement: Replace the gasket when it shows signs of aging to maintain system efficiency.
- Proper Installation: Ensure correct placement during assembly to avoid leaks.
-
Sale!This is a valve bottom disk for a foot valve. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
Sale!This is a replacement flange for a foot valve. Made out of lightweight & durable aluminum. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
Sale!This is for an aluminum screen for a foot valve. Screen Only! Foot Valve Screen Dimensions
*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo FittingsScreen Dimensions Height Diameter 2" Basic Valves 2-5/8" 5" 3" Basic Valves 4-1/2" 6" 4" Basic Valves 6-1/2" 7-1/4" 5" Basic Valves 7-3/8" 8-3/8" 6" Basic Valves 8-3/8" 9-1/4" 8 Basic Valves 13-1/2" 11-1/4" 10" Basic Valves 21" 13-5/8" 12" Basic Valves 36" 22" -
Sale!This is for the screen bolt and nut for a foot valve. You will need to know the size of your foot valve before you can order this. **These are ordered by the size of the foot valve and not the length of the bolt** Questions? Call us at 517-458-9741 or email us at info@triplekirrigation.com. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
Available in the following sizes: 4" = 120 mm 7" = 175 mm 8 5/8" = 220 mm 9 7/8" = 250 mm 10 5/8" = 270 mm 12" = 305 mm 14" = 355 mm 15" = 381 mm Click on the Size / Choose an Option to see pricing details. Please note all the clean out balls are yellow except for the 15". The 15" are orange.
-
Liquid Glycerin Filled Pressure Gauge Grade A accuracy of 1.6% full range 2.5-inch (63.5mm) diameter ABS case with 372 plastic window 1/4-inch NPT bottom connection; brass internals and connection Dampening action of the liquid makes readings possible during conditions of rapid dynamic loading and vibration Better performance in corrosive environments and immunity to moisture penetration and icing Liquid helps to lubricate all moving elements, improving the lifespan of the gauge High visibility dial face and numbers
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 3″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. This Automatic Discharge Priming Valve by Berkeley allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley -
Sale!Clack Rebuild Kit for Automatic Discharge Priming Valve - Berkeley Berkeley Automatic Discharge Priming Valve allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. Please see the parts breakdown below to identify what is included in this rebuild kit.
Brand Name: Berkeley
-
Sale!Spring for Automatic Discharge Priming Valve - Berkeley Berkeley Automatic Discharge Priming Valve allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. Please see the parts breakdown of items available for purchase.
Brand Name: Berkeley
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 4″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 5″x5″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 6″x6″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Do you need to control the flow of water to different sections of your operation? Brass slide valves, also known as brass gate valves, are commonly used in irrigation systems to control the flow of water. These valves are made of brass, a durable and corrosion-resistant material that is well-suited for outdoor and irrigation applications. Brass slide valves consist of a brass body with an internal sliding gate mechanism. The gate is typically controlled by a handle or wheel that moves the gate up or down within the valve body to open or close the flow passage. When the gate is in the fully open position, water can flow freely through the valve, allowing irrigation. Conversely, when the gate is fully closed, it blocks the flow of water, effectively stopping irrigation to a particular section of the system. One advantage of brass slide valves is their ability to provide a tight seal when closed, minimizing leakage. This is especially important in irrigation systems where water conservation is a priority. Brass is also resistant to corrosion, making these valves suitable for outdoor use and exposure to various weather conditions. Also known as a 4-Bolt Flange Brass Piston Valve. This valve can have a Double Acting Air Cylinder or Double Acting Hydraulic Cylinder added to it. 60 PSI Rating
-
Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee our valves are of the highest quality. This 6" MZ Brass Lever Valve has a four bolt flange on one side and female NPT on the other side. Also known as a MZ Stem Gate Valve.
-
Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica Zanolo (MZ) has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee their valves are of the highest quality. This valve is a MZ Brass Lever Valve (NPT x NPT) available in 4" and 6" sizes.
-
Do you need to control the flow of water to different sections of your operation? Brass slide valves, also known as brass gate valves, are commonly used in irrigation systems to control the flow of water. These valves are made of brass, a durable and corrosion-resistant material that is well-suited for outdoor and irrigation applications. Brass slide valves consist of a brass body with an internal sliding gate mechanism. The gate is typically controlled by a handle or wheel that moves the gate up or down within the valve body to open or close the flow passage. When the gate is in the fully open position, water can flow freely through the valve, allowing irrigation. Conversely, when the gate is fully closed, it blocks the flow of water, effectively stopping irrigation to a particular section of the system. One advantage of brass slide valves is their ability to provide a tight seal when closed, minimizing leakage. This is especially important in irrigation systems where water conservation is a priority. Brass is also resistant to corrosion, making these valves suitable for outdoor use and exposure to various weather conditions. This is also known as a 4-Bolt Flange Brass Piston Valve. This valve can have a Double Acting Air Cylinder added to it. 45 PSI Rating
-
This 4-Bolt Steel Flange for MZ Brass Slide Valve is an accessory for 4", 6", or 8" MZ Brass Slide Valve.
-
This Gasket for MZ Valve is an accessory for 6" or 8" MZ Valve. It is a 4-bolt rubber gasket.
-
This Double Acting Air Cylinder is an accessory for 4", 6" or 8" MZ Brass Slide Valve.
-
This Hydraulic Cylinder for MZ Brass Slide Valve (Double Acting) is an accessory for the 4", 6" or 8" MZ Brass Slide Valves.
-
These Manual Locking Handles for MZ Slide Valves are a neccessary. These are available for 4", 6" and 8" MZ Slide Valves.
-
Sale!
Do you need to move or remove water? Ironsides PVC Layflat Discharge Hose is the product for you. Available in sizes from 1 1/2 inches to 8 inches and in lengths up to 300 feet.
Ironsides PVC Layflat Discharge Hose- A heavy duty PVC water discharge hose featuring a premium quality PVC tube and cover.
- Hose is reinforced with two spiral plies and longitudinal synthetic cords.
- MSHA-accepted (Acceptance Marking No. MSHA IC-218/2) for use as a water hose in underground mining applications
- Not intended for use as a fire hose.
Brand Name: Kuriyama
