-
Sale!This is for a Riser Valve Stub Disc, this may need to be replaced occasionally on a riser valve. We also stock the Riser Valve Stub Stem.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Flange x Thread (Van Stone Style PVC) Flange x Thread (Van Stone Style PVC) is used for joining pipes or connecting valves in a piping system. It allows you to transition from a flanged fitting to a male pipe thread fitting. The bolt ring on the flange rotates separately from the hub allowing for easier bolt alignment during installation. Brand Name: Spears
-
Sale!Steel Welding Ring The Steel Welding Ring can be welded to pipe to convert it from plain to Ringlock/Circle Lock pipe.
-
Sale!Flange Adapter (Flange x Ringlock Female) - Galvanized Bolts onto steel, aluminum or plastic flange, to transition from steel to Ringlock fittings or pipe. This flange adapter can also be used to insert a flanged valve into a system. Includes gasket. We also carry the Flange Adapter (Flange x Ringlock Male).
*The terms Ringlock and Circle Lock are used interchangeably on our website*
-
Flange x Socket (Van Stone Style) is used for joining pipes or connecting valves in a piping system. It allows you to transition from a flanged fitting to a male fitting or tubing. The bolt ring on the flange rotates separately from the hub allowing for easier bolt alignment during installation. Brand Name: Spears
-
Sale!Flanged Tee - Galvanized The flanged tee bolts onto a steel flange, aluminum flange or plastic flange. This flanged tee can be used as an end tee or inline tee depending on your needs. We stock 6" and 8" flanged tees here at IrrigationSupplyParts.com, but have access to additional sizes. Please call us if you have questions or require a different size.
-
Sale!Flange Adapter (Flange x Ringlock Male) - Galvanized Bolts onto steel, aluminum or plastic flange, to transition from steel to Ringlock fittings or pipe. This flange adapter can also be used to insert a flanged valve into a system. We also carry the Flange Adapter (Flange x Ringlock Female). (The terms Ringlock and Circle Lock are used interchangeably on our website.)
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). We stock these sizes, but additional sizes are available upon request.
-
Designed for Quick Connections, System Modifications or Repairs Completely Redesigned for Improved Versatility Easy-Thread Compression Nut New Spigot Conversion Capability Full Service 150 PSI Pressure Rating Brand Name: Spears
-
Flexible Rubber Coupling with Stainless Steel Bands Durable rubber for all Schedule 40 pipe applications. Fernco Style. Brand Name: Matco Norca
-
2-In-1 Punch & Cutter
A combination tool that prepares poly tube for the installation of emitters and fittings in low pressure irrigation systems.
Features- Aligns the tube ensuring a clean, square cut.
- Suitable for cutting LDPE pipe, vinyl tubing, drip tubes, soaker hoses, micro tubes, clear vinyl tubes (CVT) and other "soft" tubes up to 3/4" OD.
- Punches a hole into 1/2" and 3/4" LDPE for the installation of Drippers, Sprays, Rigid Risers and micro tube fittings.
- Punch pierces a clean hole and removes wad leaving tube free of debris.
-
Carbon Steel Welding Wye - Schedule 40 3", 6" and 8" available to be shipped via UPS. 10" in stock and ready to ship via freight truck due to weighing over 100 pounds each. Please call for a freight quote.
-
This purge tank kit is used to prevent liquid manure from reaching the controls and vanes in the 12 Volt Power Primers. The kit includes the tank and all of the fittings shown in the image to the left.
-
Eccentric Reducer - Carbon Steel Weld Fitting - Schedule 40
-
Long Radius 90 Degree Elbow - Schedule 10 - Carbon Steel Weld Fitting The Long Radius 90 Degree Elbow – Schedule 10 is a specialized pipe fitting designed for irrigation, plumbing, and fluid transfer systems to redirect water flow with minimal resistance. Its long radius design provides a smoother flow path compared to standard elbows, reducing turbulence and pressure loss.
Features:
- 90-Degree Long Radius Design: Provides a gradual directional change, promoting efficient water flow and minimizing pressure drop.
- Schedule 10 Specification: Indicates a thinner wall thickness, making it lightweight while still suitable for low to medium-pressure systems.
- Durable Construction: Often made from materials like stainless steel or galvanized steel, ensuring longevity and resistance to wear.
- Corrosion Resistance: Suitable for outdoor and agricultural environments, offering protection against moisture and harsh conditions.
- Versatile Compatibility: Fits a variety of irrigation and fluid handling systems.
Benefits:
- Improved Flow Efficiency: The long radius design reduces friction and turbulence, maintaining consistent flow rates.
- Reduced Wear and Tear: Minimizes stress on the system, extending the lifespan of pipes and connected components.
- Lightweight Construction: Easier to handle and install compared to fittings with thicker walls, saving time and effort.
- Cost-Effective Solution: Ideal for low-pressure systems where durability and efficiency are key without the need for heavy-duty specifications.
- Flexible Applications: Perfect for irrigation systems, water transfer setups, and other fluid transport applications.
-
45 Degree Elbow - Schedule 10 - Carbon Steel Weld Fitting - 4" 45 Degree Elbow = 4" OD, 3 5/8 ID 6" 45 Degree Elbow = 6" OD, 5 1/2" ID 8" 45 Degree Elbow = 8" OD, 7 1/2" ID
-
IACO has manufactured risers for over 50 years and they have stood the test of time! Risers manufactured by IACO are made of ¾” O.D. x .058 wall drawn type II aluminum 6063-T832, in lengths required by the purchaser. End fittings are made of swedge-fit die cast zinc alloy (Zamac #3: 40,000 psi tensile, 60,000 psi yield-compression), threaded to American Standard Pipe Thread (NPT) standards, with all threads clean and full.
Brand: IACO -
Pipe Plugs are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
Bell Reducers are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
Bushings are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
This dripper plug assembly is located inside of the Oil Reservoir. The Dripper Plug Assembly consists of items #304, #305, #306 and #307 on the diagram below.
-
This lubricator assembly consists of items #301 through #307 on the diagram below. Oil Reservoir Threaded Cap Dripper Plug Assembly Mounting Bracket Clamps
-
Replacement 12 Volt Motor Assembly with Solenoid for 12 Volt Power Primer. This motor assembly consists of items #408, #409, #410, #411, #412 and #413 on the diagram below.
-
This assembly consists of items #303 and #303a on the diagram below. Oil Reservoir Threaded Cap Note: The Dripper Plug Assembly is not included in this item.
-
Replacement Vane for a 12 Volt Power Primer. These vanes are typically sold in sets of three, but we have chosen to sell them individually to allow our customers to replace the specific number of vanes required. Each vane slides into one of three slots in the rotor. This vane is item #108 on the diagram below.
-
Replacement Rotor for a 12 Volt Power Primer. This Rotor is item #112 on the diagram below.
-
Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee our valves are of the highest quality. This 6" MZ Brass Lever Valve has a four bolt flange on one side and female NPT on the other side. Also known as a MZ Stem Gate Valve.
-
Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica Zanolo (MZ) has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee their valves are of the highest quality. This valve is a MZ Brass Lever Valve (NPT x NPT) available in 4" and 6" sizes.
-
Sleeve Couplings are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
This economical valve is made of durable, high quality PVC material which makes it last longer. No adjustment necessary. Brand Name: Matco Norca
-
Missing a Lynch Pin to your Shug Grip Heavy Duty Ringlock Clamp? These quick disconnect fasteners are designed with a solid pin and self-locking ring. This ring allows the pin to be securely held in place and provides an easy grip for quick removal.
-
Missing a Cap Screw to your Shug Grip Double Bolt Clamp or Shug Grip Coupler Set? 3/8" - 16 x 1-3/4" ASTM F837 Grade 18-8 Stainless Steel
-
Sale!A Taper Ring Nozzle Set combines the changeability of a traditional ring nozzle while providing some of the efficiency of a taper bore nozzle. This Taper Ring Nozzle Set for a Nelson SR150 Big Gun includes the Cap, Body and One Nozzle available in 7 sizes ranging from 0.87" to 1.34" (22 mm to 34 mm) . Please see the charts below to assist you in choosing the best nozzle for your specific needs. Brand Name: Nelson
-
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs,This is Komet's latest style of water gun (or sprinkler) at a cost-effective price. They have taken what was great about their Komet Twin 202 Pro and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included With Gun Flange connection All Nozzles are Sold Separately:
13 nozzles available for purchase - CLICK HERE.
Nozzle Range: 22.0 – 45.0 mm / 0.87″ – 1.77″ Flow Range: 32.4 – 235.0 m³/h / 137 – 1032 gpm Throw Range: 41.5 – 90.0 m / 247 – 590 ft Please CLICK HERE for REPAIR / REPLACEMENT parts.
Please call us for more details.
Brand Name: Komet
WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs, This is Komet's latest style of gun. They have taken what was great about their Komet Twin 101 Plus and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included Flange connection All Nozzles are Sold Separately:
9 nozzles available for purchase – CLICK HERE.
Nozzle Range: 12.0 – 28.0 mm / 0.47″ – 1.10″ Flow Range: 7.8 – 79.2 m³/h / 35– 363 gpm Throw Range: 24.2 – 60.6 m / 161 – 404 ft Please CLICK HERE for REPAIR / REPLACEMENT parts. Brand Name: Komet WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!These nozzles are for the Komet Twin 202 ULTRA PC-24 Degree these are the new style, they are threaded. These ARE NOT for the Komet Twin 202 PRO PC-24 Degree. Available in 13 sizes. Please see the chart below for more details.
Brand: Komet
-
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs, This is Komet's latest style of gun. They have taken what was great about their Komet Twin 140 Plus and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included Flange connection All Nozzles are Sold Separately:
10 nozzles available for purchase - CLICK HERE.
Nozzle Range: 16.0 – 34.0 mm / 0.63″ – 1.34″ Flow Range: 13.8 – 116.8 m³/h / 62– 535 gpm Throw Range: 29.0 – 68.7 m / 192 – 459 ft Please CLICK HERE for REPAIR / REPLACEMENT parts.
Brand Name: Komet
WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!These nozzles are for the Komet Twin 160 ULTRA PC-24 Degree these are the new style, they are threaded. These ARE NOT for the Komet Twin 160 PRO PC-24 Degree. Available in 11 sizes. Please see the chart below for more details.
Brand: Komet
