-
Sale!Ball is diamond turned, after molding, to make it spherically perfect, which provides precise contact between ball and seats. "Ball is diamond turned FKM (viton type) seals. Precision molded in polypropylene. Polypropylene is reinforced with fiberglass for additional strength. PTFE self-lubricating stem bush_ings and seats cannot stick or bind. Self-aligning ball moves freely against the PTFE seats for smooth operation. The valve opens and closes with very little pressure on the handle.
-
Mandal’s Dragman EXTRA (DRX) Closeout Special While Supplies Last We have the following quantities:
- 4 1/2” 660 feet - 2 rolls
- 6” 1320 feet - 2 rolls SOLD SOLD SOLD
- 7 1/4” 660 feet - 2 rolls
- 8" 660 feet - 3 Rolls SOLD SOLD SOLD
The Supreme Drag Hose
Mandals Dragman series consists of flexible, high-quality lay-flat hoses uniquely designed for the agriculture industry. They are particularly great to use with umbilical drag systems to distribute slurry and manure in a time- and cost-efficient way.
A premium product offering both durability and wear resistance, they will save you time and money over the long haul. FEATURES- Designed for umbilical drag system used for distribution of slurry and manure in agricultural fields.
- Engineered with extreme tensile strength and abrasion properties. High tenacity filament polyester yarn .
- Covered and lined with Thermoplastic Polyurethane (TPU).
- Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave.
- Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure.
- Ultimate tensile strength and adhesion level polymer to weave.
- Enhanced abrasion resistance.
- High diameter and extension stability.
- Low kink radius.
- High puncture resistance.
- Temperature range -50ºC to +75ºC (pure water) (-58 ºF to +167 ºF).
- Standard lengths depending on diameter.
- Excellent UV and weathering resistance.
-
Mandals Aquaman is a lightweight lay-flat hose designed to transfer large volumes of liquids with high working pressures. In addition to its premium abrasion resistance, the hose is designed, tested, and certified for potable water transfer. We are offering Mandal's Aquaman Hose in 2 1/2" diameter in 50-foot lengths. Note that the end connections are not included. Access to clean drinking water is a crucial part of any country’s infrastructure and is becoming a challenge in many parts of the world. The use of Mandals Aquaman can help distribute water more evenly, minimizing the amount of water you have to have access to compared to more traditional methods of water transportation. Safety is our top priority in the design of the hose, which ensures clean drinking water and user-friendliness while minimizing the risk of water-borne diseases.
Product Specifications
Primary Uses & Applications- Safe transport of drinking water
- Potable water applications
- Water Bypass
Color Options- Blue (standard)
Operating TemperatureThe hose has been developed to perform in different weather and environments, with an operating temperature from -50°C to + 75 °C ( -58°F to +167°F) for pure water. High Diameter and Dimension Stability Great Adhesion and Tensile Strength Drinking Water Approved Long Lifetime and Maintenance Free Easy to Deploy and Store High Abrasion and Kink Resistance High Working Pressure High Quality MaterialsFor a custom price and freight quote, please fill out the form below and we will get back to you!
-
While Supplies Last Call 517-458-9741 to order today or order online! Click on the SKU# to determine your freight costs. This will take you to a product page where you can add the product to your cart, enter your shipping information and it will give you several freight choices. We have the following quantities: VINYLFLOW BLUE
Call 517-458-9741 to order today or order online! Click on the SKU# to determine your freight costs. This will take you to a product page where you can add the product to your cart, enter your shipping information and it will give you several freight choices. VINYLGREENSKU# Price Per Foot Total Feet Diameter Total Price 45-VF300-25-LFP $1.47 25 3" $36.75 45-VF400-10-LFP $2.40 10 4" $24.00 45-VF300-26-LFP $1.47 26 3" $38.22
Call 517-458-9741 to order today or order online! Click on the SKU# to determine your freight costs. This will take you to a product page where you can add the product to your cart, enter your shipping information and it will give you several freight choices. IRONSIDESSKU# Price Per Foot Total Feet Diameter Total Price 45-VG300-25-LFP $1.20 25 3" $30.00 45-VG300-20-LFP $1.20 20 3" $24.00 45-VG600-43-LFP $3.00 43 6" $129.00 45-VG600-40-LFP $3.00 40 6" $120.00
Call 517-458-9741 to order today or order online!SKU# Price Per Foot Total Feet Diameter Total Price 45-IS150-10-LFP $1.50 10 1 1/2" $15.00 45-IS200-35-LFP $1.75 35 2" $61.25 45-IS200-33-LFP $1.75 33 2" $57.75 45-IS300-20-LFP $3.60 20 3" $72.00 45-IS300-30-LFP $3.60 30 3" $108.00 -
Sale!2" - 6" Round Hole Strainer made by Kuriyama Watch our video: Strainers Explained
-
This assembly comes with the 6" OPTIFLUX 4100 body, flow converter and 30' cable. 6" OPTIFLUX 4100 Body by KROHNE The OPTIFLUX 4100 is an electromagnetic flowmeter (EMF) for a wide range of standard process applications with aggressive and abrasive liquids. It enables reliable flow measurement even under harsh process conditions with temperatures up to +180°C / +356°F, low conductivity (≥5 µS/cm) and solid content (up to 10%). This makes the flowmeter particularly suitable for applications involving corrosive chemicals, sewage and drilling mud or mining sludge. Installation in measurement chambers subject to (constant) flooding is also possible using the optional IP68 / NEMA 6P rated version. Unlike the basic version OPTIFLUX 4050, the OPTIFLUX 4100 features higher accuracy. It comes with a selection of chemically resistant liners and electrodes. Due to its full bore design without moving or intruding parts, there is no pressure loss and no maintenance required. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool. The IFC 100 is a 4-wire electromagnetic signal converter. Combined with the flow sensors of the OPTIFLUX and WATERFLUX series it forms the OPTIFLUX 1100, OPTIFLUX 2100, OPTIFLUX 4100, OPTIFLUX 5100, OPTIFLUX 6100 and WATERFLUX 3100 electromagnetic flowmeters for standard applications with conductive liquids.
Product highlights
- Bi-directional flow measurement over a wide dynamic range (turndown ratio: 1000:1)
- PTFE, PFA, ETFE, hard rubber, soft rubber or PU liner: excellent chemical and abrasion resistance
- Wide range of electrode materials
- Special designs, sizes, inner diameters and liner thicknesses on request
- Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
- Optional external coatings for offshore or subsoil installation (also acc. to ISO 12944)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- Full bore design: No moving parts, no wear, no pressure loss
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
General- Standard applications with clean, aggressive or abrasive liquids
- Conductive fluid chemicals
- Process water, cooling water
- Water injection (high pressure)
- Drilling mud
- Produced water
- Hydrocyclone feed lines
- Chemicals (black liquor, bleach, etc.)
- Irrigation
- Sludge and sewage treatment
6" Electromagnetic Flow Converter by KROHNEThe IFC 100 can be freely combined with KROHNE's entire standard series of electromagnetic flowmeters. The IFC 100 was designed for applications requiring an economical measuring solution with a high level of technology. KROHNE offers its customers a comprehensive application and process diagnostics package far beyond what device diagnostics normally offer. These devices continually measure all decisive parameters and convey information about the condition of the device, the quality of the measured value and potential application errors. The user has a precise overview of the process at any given time –thus fulfilling from A to Z the constantly increasing requirements of an optimal process. With its resistance measurement and noise measurement, the IFC 100 lays the foundation for even more process transparency and reliably reports about:- Gas bubbles and detection of solids
- Changing or excessively low conductivity (e.g. during change of media or empty tube)
- Deposits on electrodes
- Electrode corrosion
- Too high media or ambient temperature
- Compact, remote field, wall-mounted and rack-mounted housing
- With many sensor and process diagnostics for standard requirements
- 4-wire, 4…20 mA, pulse, frequency, status, HART®
Interested in viewing a product selection list of all the KROHNE flow measurement lines? -
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under F.00.4 - consists of (2) Washer w/pin 0.5 (F30), (2) Washer 0.5 (F9), (2) Cover for hub (F8), (2) Labrinth Seal (F7), (2) Dust Seal (F13), (1) Shift Lever Upper (F6), (1) Shaft Drive Arm (F12), (1) Spring Drive Arm (F11) and (1) Cap for Drive Arm Spring (F10)
For a complete list of parts click on the following link and scroll down.
Twin Max highlight - Update
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under F.00.5.1 - consists of (1) Spacer (F14), (1) Antidust Ring (F15), (2) Dust Seal (F16), (1) Shift Lever Lower (F21.1) and (1) Spacer (F17)
For a complete list of parts click on the following link and scroll down.
Twin Max highlight - Update
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under A.00.0 - Consists of (6) Bolt M6x60 (A11), (6) Washer 6 (A12), (4) Brake Spring (24), (1) Housing Cover (A1), (4) Bolt M6x25 (A6), (2) Brake Disk (A4), (1) Collar Bearing (A3), (1) Housing Bearing (A2), (6) Washer 6 (13), (6) Nut M6 (A14), (1) Retaining Ring (A7), (2) Collar for bearing (A8), (2) Trip Stop Ring (A9), (4) Washer 6 (A22), (4) Bolt M6x35 (A23), (1) O-Ring 2425 (A30), (1) O-Ring 158 (A31), (2) Brake Pad Upper (A16), (1) Bearing (A17), (1) Brake Lining (A18), (1) Support Ring (A5), (1) O-Ring 6237 (A19), (1) Retaining Ring (A20), (1) Lip Seal (A21), (1) Base (A10.1), (1) O-Ring 3225 (A32), (1) Adapter/2" BSP (A27.1), (1) Adapter/2" NPT (A28.1) and (4) Bolt M8x25 (A29.1)
For a complete list of parts click on the following link and scroll down.
Twin Max highlight - Update
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under C.00.0.1 - consists of (1) Drive Arm (C1), (1) Deflector 36 (C2), (3) Washer 6.5 (C4), (1) Screw Ej-K 60x20 (C5), (1) Drive Arm Bracket Right (C11), (2) Counterweight drive arm (C8), (2) Screw Ej-K60 x 25 NI (C9), (4) Bolt M6x35 (C6), (4) Washer 6.5 (C7), (1) Drive arm bracket left (C10) and (4) Nut M6 (C12)
For a complete list of parts click on the following link and scroll down.
Twin Max highlight - Update
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under C.00.2 - consists of (1) Deflector 36 (C2), (3) Washer 6.5 (C4) and (1) Screw Ej-K60x20 (C5)
For a complete list of parts click on the following link and scroll down.
Twin Max highlight - Update
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under A.00.4 - consists of (1) O-Ring 2425 (A30), (1) O-Ring 158 (A31), (2) Brake Pad Upper (A16), (1) Bearing (A17), (1) Brake Lining (A18), (1) Support Ring (A5), (1) O-Ring 6237 (A19), (1) Retaining Ring (A20) and (1) Lip Seal (A21)
For a complete list of parts click on the following link and scroll down.
Twin Max highlight - Update
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra/Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under E.oo.1 - consists of (1) Drive Arm (E1), (1) Deflector 47 (E2), (7) Washer 6.5 (E3), (5) Screw Ej-K60x20 (E4), (2) Counterweight drive arm (E5) and (4) Bolt M6x35 (E6)
For a complete list of parts click on the following link and scroll down:
Twin 160 Ultra Revised Parts
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra/Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under A.oo.11 - contains (1) brake disk (A4) and (4) bolts M8x60 (A5) For a complete list of parts click on the following link and scroll down:
Twin 160 Ultra Revised Parts
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra/Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under E.oo.2 - consists of (1) Deflector 47 (E2), (7) Washer 6.5 (E3) and (5) Screw Ej-K 60x20 (E4)
For a complete list of parts click on the following link and scroll down:
Twin 160 Ultra Revised Parts
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra and Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under A.00.7 - consists of (1) Antidust Cover (A9), (1) Antidust Ring (A10), (4) Brake Pad (A11), (1) O-Ring 72.76x1.78 (A12), (1) O-Ring 73x3 (A13), (1) Friction Disk (A14), (1) Lip Seal (A15), (1) Bearing (A16) and (1) O-Ring 79x3 (A17)
For a complete list of parts click on the following link and scroll down:
Twin 160 Ultra Revised Parts
-
Note: This kit works for the Komet Twin 101 Ultra and the Komet Twin 140 Ultra Kit includes: (1) 02010542 - O-Ring 64X3 , (1) 04010935 - Adapter/Flange Ansi and (1) 02010806 - Gasket for Flange Ansi Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don’t see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 101 Ultra and Twin 140 Ultra Twin 101 Revised Ultra
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Rebuild Kit for Komet Big Gun Twin 101 Ultra and Twin 140 Ultra. This Kit-Brake for Twin 101 Ultra & Twin 140 Ultra - Consists of (1) Anti-dust Cover (A9), (1) Anti-dust Ring (A10), (4) Brake Pads (A11), (1) O-Ring 56.87 x 1.78 (A12), (1) O-Ring 58 x 3 (A13), (1) Friction Disk (A14), (1) Bearing (A16), (1) Lip Seal (A15) and (1) O-Ring 64 x 3 (A17) Twin 101 Revised Ultra This kit includes the parts shown in the accompanying diagram under A.00.7:
For a complete list of parts click on the following link and scroll down:
Twin 101 Revised Ultra
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 101 Ultra and Twin 140 Ultra Twin 101 Revised Ultra This kit includes the parts shown in the accompanying diagram under E.00.1 - Consist of (1) Drive Arm (E1), (1) Deflector 47 (E2), (7) Washer 6.5 (E3), (5) Screw Ej-K 60x20 (E4), (2) Counterweight Drive Arm (E5) and (4) Bolt M6x35 (E6)
For a complete list of parts click on the following link and scroll down:
Twin 101 Revised Ultra
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 101 Ultra & Twin 140 Ultra Twin 101 Revised Ultra This kit includes the parts shown in the accompanying diagram under E.00.2 - consists of (1) Deflector (E2), (7) Washer 6.5 (E3) and (5) Screw Ej-K 60x20 (E4)
For a complete list of parts click on the following link and scroll down:
Twin 101 Revised Ultra
-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 101 Ultra and Twin 140 Ultra Twin 101 Revised Ultra This kit includes the parts shown in the accompanying diagram under A.00.11 - contains (1) brake disk (A4) and (3) bolts M8x60 (A5)
For a complete list of parts click on the following link and scroll down:
Twin 101 Revised Ultra
-
Sale!These nozzles are for a Komet 162 FC or Komet 163 PC Sprinkler.
-
Click below for parts list: Spare Parts Komet 163 US
-
Sale!This medium volume sprinkler is suitable for versatile use in general field irrigation on solid-set and mechanized irrigation systems such as travellers. Changing from part circle to full circle operation is easy by adjusting the part circle stops. The Komet 163 shows good performance in windy conditions, and complements the full circle model Komet 162 where irrigation of adjacent fields is not allowed. Long wear life, high performance, proven design and maintenance free operation are among other its outstanding features. Uses 5 Nozzles: 8mm, 10mm, 12mm, 14mm, 16mm Nozzles sold separately Click on the link to view sprinkler spec details: Catalog-Komet-Sprinklers_EN_DE_A4-Rif.-381-1 (1) Click on the link to view spare parts details: Spare Parts Komet 163 US
-
Sale!The Komet 162 is a medium volume sprinkler with full circle operation and the same performance and features as the Komet 163. Designed for use in general field irrigation mainly in extensive solid-set and moveable irrigation systems. Long wear life, high performance, proven design and maintenance free operation are among other its outstanding features. Available in 5 Nozzles: 8mm, 10mm, 12mm, 14mm, 16mm Nozzles sold separately. Click on the link below to review product specs: Catalog-Komet-Sprinklers_EN_DE_A4-Rif.-381-1 Click on the link below to review parts list: Spare Parts Komet 162 US
-
Sale!
Premium light dripline with seamless construction for strength and ease of installation. Drippers have an integrated inlet filter to protect the flow path from plugging and the extra-large cross sectional area prevents clogging. Manufactured with the highest quality polyethylene resins producing high strength and abrasion resistance. An excellent coefficient of variation (<2.0%) ensures highly uniform water distribution. Two green stripes identify the dripper side for correct installation. Ideal choice for close outlet requirements and low application crops with above ground, under mulch or subsurface applications. This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. As indicated in the name of this part #, this drip tape is 7,545 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .35 GPH per Emitter/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. CHARACTERISTICS AND ADVANTAGES: • Two stripes identify the dripline side with the exit holes ensuring correct installation. • Target markets include row crop (surface, subsurface and under mulch), open field and greenhouse. • Excellent choice for close dripper spacing, low application rates and extended performance in the field. • The integrated inlet filter and extra large cross section provide plugging protection. • Laser drilled dripper outlet prevents root intrusion and siphon plugging. • Exceptional filtration performance extends the range of usable fertilizers. • A lower Cv, <2% results in highly uniform water distribution. • Less susceptible to damage during installation and easily retrievable. • UV resistant and resistant to common fertilizers. • Recommended filtration: 200 Mesh for .07 GPH and .09 GPH For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.Save on Drip Tape with Pallet Pricing!!
-
16 Rolls per Pallet
-
Call for a Price Quote Today!
-
517-458-9741
In Stock and ready to ship today!
Prices Do Not Include Freight
-
-
Sale!
Irritec drip systems feature outstanding uniformity and unrivaled performance. The exceptional quality of Irritec manufacturing ensures the application of the right amount of water. Drip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 6000' feet in length. It measures 7/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .17 GPH/100’. Extra Discounts available for Pallet Quantities. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.Save on Drip Tape with Pallet Pricing!!
-
16 Rolls per Pallet
-
Call for a Price Quote Today!
-
517-458-9741
In Stock and ready to ship today!
Prices Do Not Include Freight
-
-
Sale!
Save on Drip Tape with Pallet Pricing!!
-
16 Rolls per Pallet
-
Call for a Price Quote Today!
-
517-458-9741
In Stock and ready to ship today!
Prices Do Not Include Freight
Irritec P1 Drip Tape 7/8″ 8 Mil 12″ Spacing 0.25 GPH Per Emitter 6000′ Roll
Special Pricing on Pallet Quantities while supplies last. 16 Rolls Per Pallet. Call 517-458-9741 for a custom freight quote and to place your order. Irritec irrigation systems are the solution for a substantial increase in the beneficial application of water for agriculture ensuring increased irrigation efficiency. Drip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 6000' feet in length. It measures 7/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .25 GPH/100’. Extra Discounts available for Pallet Quantities. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
-
Sale!
IRRITEC irrigation systems guarantee the maximum efficiency with the least environmental impact and at a reasonable cost. This makes life easier for the people cultivating fields and tending to our crops. Agriculture is more than work; it is our passion. As agriculturalists, we ensure every drop is applied as efficiently as possible, while minimizing the ecological footprint and ensuring proper nutrition to the field. Drip Tape with built-in emitters spaced every 8 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 8000′ feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .25 GPH per emitter Extra Discounts available for Pallet Quantities. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Please Call today for more information. Limited quantities available! PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU!Save on Drip Tape with Pallet Pricing!!
-
16 Rolls per Pallet
-
Call for a Price Quote Today!
-
517-458-9741
In Stock and ready to ship today!
Prices Do Not Include Freight
-
-
Sale!
Drip tape is a pipeline with an emitter manufactured inside the pipeline. It is a thin-walled tube rather than a structure pipe, with the common wall-thickness being 0.2mm (8mil) and is usually considered a seasonal product used in market gardens or rows of crops. It is different than drip tubing, which is more durable and designed to be left in the field. Roll Integrated extrusion technology The flat dripper, barely 2mm thick, is welded to the wall of the hose, resulting in practically zero water loss. The filter at the entrance to the dripper, with eight flow holes, eliminates the possibility of clogging. The turbulent flow labyrinth, adapted to give an even flow rate, prevents sedimentation even at low working pressures. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.Save on Drip Tape with Pallet Pricing!!
-
16 Rolls per Pallet
-
Call for a Price Quote Today!
-
517-458-9741
In Stock and ready to ship today!
Prices Do Not Include Freight
-
-
Sale!
Are you looking for a mesh filter to prevent debris from passing into your 3/4" water hose line?
The Irritec Mesh Screen Filter is an excellent choice. Irritec outfits these 3/4-Inch Hose Thread T-Filters with a 150-mesh stainless-steel screen. One side of the filter has a female hose swivel and the other has a male hose thread. Irritec T-Filters are excellent for connecting tubing to pumps, filters, or other irrigation projects. These filters fit onto any hose bib or garden hose end. Use them wherever your system requires a 90-degree turn in the head assembly components. Unfiltered water enters the T from the female side, passes through the internal filter, and exits through the exit point on the side of the filter. Irritec designs all its irrigation supplies with quality and versatility in mind. These handy T-filters make it easier than ever to customize your irrigation setup to fit your unique needs! -
Sale!This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .25 GPH per Emitter/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: 50-11703437 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
CLOSEOUT
Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.SKU# Price Per Foot Total Feet Diameter Total Price 45-IS300-30-LFP $3.60 30 3" $108.00 -
CLOSEOUT
Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.SKU# Price Per Foot Total Feet Diameter Total Price 45-IS300-20-LFP $3.60 20 3" $72.00 -
CLOSEOUT
Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.SKU# Price Per Foot Total Feet Diameter Total Price 45-IS200-35-LFP $1.75 35 2" $61.25 -
CLOSEOUT
Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.SKU# Price Per Foot Total Feet Diameter Total Price 45-IS200-33-LFP $1.75 33 2" $57.75 -
CLOSEOUT
Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.SKU# Price Per Foot Total Feet Diameter Total Price 45-IS150-10-LFP $1.50 10 1 1/2" $15.00 -
Sale!Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Handle with Collar for 8″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Handle with Collar for 3″ to 6″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Galvanized Steel Z Pipe Short Base Underground Riser: Female or Male Top galvanized steel underground riser with manufacturer warranty. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
