Shop Irrigation Parts

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

45 Degree Elbow – IPS – Galvanized

Price range: $104.65 through $278.22
Thrust-Blocking PVC Pipe

Water under pressure exerts thrust forces in piping systems at: changes in pipe size or direction, dead ends and valves.

The design of thrust-blocking requires knowledge of the thrust generated and the bearing strength of the soil against which the thrust block will be placed.

To be effective, a thrust block must:

be placed against undisturbed or fully compacted earth.

contact the fitting over a sufficiently large area so as not to create stress points on the fitting.

have sufficient area on the soil to restrain the thrust without exceeding the bearing strength of the soil.

Supply line 3" in diameter and larger shall receive concrete thrust blocks. Please research specifications for amount of concrete to be used for thrust block.

This elbow provides a 45 degree change of direction on PVC pipe. Includes gaskets. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Straight Tee for PVC – Galvanized

Price range: $118.30 through $272.47
Thrust-Blocking PVC Pipe

Water under pressure exerts thrust forces in piping systems at: changes in pipe size or direction, dead ends and valves.

The design of thrust-blocking requires knowledge of the thrust generated and the bearing strength of the soil against which the thrust block will be placed.

To be effective, a thrust block must:

be placed against undisturbed or fully compacted earth.

contact the fitting over a sufficiently large area so as not to create stress points on the fitting.

have sufficient area on the soil to restrain the thrust without exceeding the bearing strength of the soil.

Supply line 3" in diameter and larger shall receive concrete thrust blocks. Please research specifications for amount of concrete to be used for thrust block.

This is used to form a 90 Degree branch from the mainline that is underground. Includes gaskets. Available in 4", 6" & 8" sizes Brand Name: Pierce
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Galvanized Malleable 45 Degree Street Elbow

Price range: $27.64 through $158.06

Galvanized Mall 45 Street Elbow MPT x FPT Meets or exceeds all applicable ASTM and ANSI standards 100% pressure tested before leaving the factory UL and FM approvals on Chinese Malleable fittings Brand Name: Matco Norca
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Ringlock End Tee – Aluminum

$297.50

This Ringlock End Tee allows change of direction at end of the aluminum mainline. Ringlock type. Gasket included. Heavy Duty Aluminum! *Be sure to check out our full line of Ringlock Fittings!* Brand Name: Travis Pattern
View Cart

Add to cart / Details

Mounting Bracket #9

$53.92

Protek hand primer mounting brackets for #9. Made out of a heavy-duty, durable steel. Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Aluminum Weld On End Plug Cover

Price range: $69.30 through $93.15

Weld On End Plug Cover. Made of high quality cast aluminum. Be sure to check out our full line of aluminum fabrication fittings. Brand Name: Travis Pattern
View Cart

Add to cart / Details

Tella 400CC Hydraulic Motor (TRI-PUR-000270)

$939.13

The WER Tella 400CC Hydraulic Motor (TRI-PUR-000270) is built for demanding manure and slurry pump applications, delivering consistent torque and dependable power under heavy load. Engineered for durability, this 400CC motor withstands high pressures and continuous use in tough agricultural environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
View Cart

Add to cart / Details

External Snap Ring (160-TRI-PUR-000218)

$13.62

The WER External Snap Ring (160-TRI-PUR-000218) is a precision-engineered retaining ring designed to secure bearings and components within WER manure and slurry pump systems. Built from durable materials for strength and reliability, this snap ring maintains proper alignment under heavy loads and harsh agricultural conditions. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
View Cart

Add to cart / Details

Oil Seal 70-110-12 (160-TRI-PUR-000217)

$23.87

The WER Oil Seal 70-110-12 (160-TRI-PUR-000217) is built to provide reliable sealing performance in WER manure and slurry pump systems. Designed to keep lubricants in and contaminants out, this high-quality seal helps protect bearings, reduce wear, and extend pump service life.
Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
View Cart

Add to cart / Details

Chopper Tapered Roller Bearing (160-TRI-PUR-000216)

$107.53

The WER Chopper Tapered Roller Bearing (160-TRI-PUR-000216) is engineered for durability and precision in WER manure and slurry pump systems. Its tapered design provides superior load distribution, reducing friction and wear while ensuring smooth, reliable rotation of the chopper assembly. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
View Cart

Add to cart / Details

IRONSIDES Layflat Discharge Hose 45-IS300-30-LFP

$108.00

CLOSEOUT

SKU# Price Per Foot Total Feet Diameter Total Price

45-IS300-30-LFP $3.60 30 3" $108.00

Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.
View Cart

Add to cart / Details

VINYL GREEN PVC Layflat Discharge Hose 45-VG600-40-LFP

$120.00

CLOSEOUT

SKU# Price Per Foot Total Feet Diameter Total Price

45-VG600-40-LFP $3.00 40 6" $120.00

Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.
View Cart

Add to cart / Details

VINYL GREEN PVC Layflat Discharge Hose 45-VG300-20-LFP

$24.00

CLOSEOUT

SKU# Price Per Foot Total Feet Diameter Total Price

45-VG300-20-LFP $1.20 20 3" $24.00

Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.
View Cart

Add to cart / Details

VINYL GREEN PVC Layflat Discharge Hose 45-VG300-25-LFP

$30.00

CLOSEOUT

SKU# Price Per Foot Total Feet Diameter Total Price

45-VG300-25-LFP $1.20 25 3" $30.00

Prices Do Not include freight. Features and Benefits: Smooth tube – Provides low friction loss. Drip irrigation – Hose lays straight with minimal elongation under pressure. Hose may be punched easily without tearing. Ultraviolet inhibitors – Reduces aging and weather checking. Storage – All coils have PVC cores for easier dispensing. Hoses coil flat for easy storage.
Sale!

View Cart

Add to cart / Details

6x6x4x42 Inline Riser w/ 2″ Air Relief-Galv (MxF)

Original price was: $406.65.Current price is: $370.05.

Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
Sale!

View Cart

Add to cart / Details

Cap Riser-Galvanized Steel 6x6x42

Original price was: $384.86.Current price is: $350.22.

Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.

Sale!

TigerFlex Ureflex 1.25″ Hose – 100 Foot

Specifications

Brand	Tigerflex®
Type	Thick Abrasion Resistant Polyurethane Liner
Style	Agricultural dry fertilizers
Series	UREFLEX-1
Color	Black
Performance	Static Dissipative Cover
Material	PVC Cover with Polyurethane Liner
Industry Standards/Certifications	EU 2002/95/EC

General Applications

Agricultural dry fertilizers
Air seeder lines
Fly ash collection
Industrial vacuum equipment
Material chutes
Material handling - heavy duty abrasive
Milling machine scrap recovery
Rock, gravel, sand and crushed concrete vacuuming
Shot blast recovery

Construction

PVC cover with polyurethane liner and rigid PVC helix

Service Temperature [Min]	-40 ºC-40 ºF
Service Temperature [Max]	65 ºC150 ºF

Features and Advantages

Thick Abrasion Resistant Polyurethane Liner - Designed for dry applications where severe abrasion is a factor. Provides for longer hose life and lower operating costs versus rubber or PVC hoses.
Static Dissipative Cover - Specially formulated to help prevent the build-up of static electricity for added safety and to help keep material flowing smoothly.
"Cold-Flex" Materials - Hose remains flexible in sub-zero temperatures.
Convoluted Outer Cover - Provides increased hose flexibility.
Oil Resistant Polyurethane Liner - Resists most animal and petroleum based oils.
Phthalate Free

ID	1 1/4 in 31.8 mm
OD	1.53 in 39.0 mm
Working Pressure at 68ºF	50 psi
Working Pressure at 104ºF	25 psi
Vacuum Rating at 68ºF	Full
Vacuum Rating at 104ºF	28 inHg
Min. Bending Radius at 68ºF	2 in
Standard Length	100 ft
Weight	0.22 lbs/ft

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

TigerFlex Solarguard Hose (2″, 2 1/2″ and 4″) 100′ Rolls

Price range: $323.40 through $1,102.80
This is for a 100' roll in 2", 2 1/2″ or 4″. Shorter lengths are available in 5' increments if needed. Please call in for pricing. Please Call for Freight Quote Tigerflex™ Solarguard™ WST-SLR™ Series hose is a robust PVC fabric-reinforced suction and discharge hose designed for the demanding needs of US farmers. This hose is crafted with a special material to combat cracking caused by intense UV exposure. Rigorous testing demonstrates that the Solarguard™ material maintains 97% of its initial tensile strength even after extended UV exposure. Its high-tensile-strength polyester yarn jacket makes it suitable for both suction and high-pressure discharge applications, meeting the durability requirements of US agricultural operations. Brand Name: Kuriyama

General Applications

Fish suction

Irrigation lines

Pumps, rental and construction dewatering

Pumps, trash

Suction and discharge

Water suction - heavy duty

Construction
Double-ply PVC tube, polyester fabric reinforcement, and rigid PVC helix.

Service Temperature [Min]

-4 ºF-20 ºC

Service Temperature [Max]

150 ºF65 ºC

Advanced UV Protection! - The hose material is specially formulated to resist the cracking that can result from exposure to damaging UV light. Our tests show the Solarguard material retained 97% of its original tensile strength after prolonged UV exposure, compared to only 55% tensile strength retention for similar PVC hoses. (This information is based on independent third party test reports which are, to the best of our knowledge, complete and accurate. However, no warranty is expressed or implied, as specific application parameters such as temperature, stress and strain, and chemical exposure vary widely.)

Advanced Transparent UV Protected Construction - "See-the-flow." Allows for visual confirmation of material flow.

Fabric Reinforcement - High tensile strength polyester yarn jacket to handle both suction and higher pressure discharge applications.

Easy Slide "Safety Yellow" Helix- Highly visible yellow color helps to easily identify hose. Rigid helix design protects hose tube from cover wear and allows hose to slide easily over rough surfaces.

Phthalate Free

Please Call for a Freight Quote
View Cart

Add to cart / Details

Komet Twin Max Rebuild Kit Upper Shift Lever

$95.05

Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under F.00.4 - consists of (2) Washer w/pin 0.5 (F30), (2) Washer 0.5 (F9), (2) Cover for hub (F8), (2) Labrinth Seal (F7), (2) Dust Seal (F13), (1) Shift Lever Upper (F6), (1) Shaft Drive Arm (F12), (1) Spring Drive Arm (F11) and (1) Cap for Drive Arm Spring (F10)
For a complete list of parts click on the following link and scroll down.

Twin Max highlight - Update
View Cart

Add to cart / Details

Komet Twin Max Rebuild Kit Deflector

$63.21

Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under C.00.2 - consists of (1) Deflector 36 (C2), (3) Washer 6.5 (C4) and (1) Screw Ej-K60x20 (C5)
For a complete list of parts click on the following link and scroll down.

Twin Max highlight - Update
View Cart

Add to cart / Details

Komet Twin 160 Ultra/Komet 202 Ultra Rebuild Kit Deflector

$65.97

Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra/Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under E.oo.2 - consists of (1) Deflector 47 (E2), (7) Washer 6.5 (E3) and (5) Screw Ej-K 60x20 (E4)
For a complete list of parts click on the following link and scroll down:

Twin 160 Ultra Revised Parts
View Cart

Add to cart / Details

Komet Twin 160Ultra/Twin 202 Ultra Rebuild Kit Drive Arm

$296.93

Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra/Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under E.oo.1 - consists of (1) Drive Arm (E1), (1) Deflector 47 (E2), (7) Washer 6.5 (E3), (5) Screw Ej-K60x20 (E4), (2) Counterweight drive arm (E5) and (4) Bolt M6x35 (E6)
For a complete list of parts click on the following link and scroll down:

Twin 160 Ultra Revised Parts
View Cart

Add to cart / Details

Komet Twin 160 Ultra/Twin 202 Ultra Rebuild Kit Brake Disc

$82.95

Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 160 Ultra/Twin 202 Ultra This kit includes the parts shown in the accompanying diagram under A.oo.11 - contains (1) brake disk (A4) and (4) bolts M8x60 (A5) For a complete list of parts click on the following link and scroll down:
Twin 160 Ultra Revised Parts
View Cart

Add to cart / Details

Komet Twin 101 Ultra & Twin 140 Ultra Rebuild Kit Brake Disc

$44.47

Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin 101 Ultra and Twin 140 Ultra Twin 101 Revised Ultra This kit includes the parts shown in the accompanying diagram under A.00.11 - contains (1) brake disk (A4) and (3) bolts M8x60 (A5)
For a complete list of parts click on the following link and scroll down:

Twin 101 Revised Ultra
Sale!

View Cart

Add to cart / Details

Polypropylene Pipe Fittings: Coupling Standard 2 Inch

Original price was: $18.76.Current price is: $11.25.

Excellent chemical resistance. Glass reinforced polypropylene. Heavy duty (Schedule 80). Lightweight with excellent strength. NPTthreads. Pressure to 150 P.S.I. at 70°F
Sale!

View Cart

Add to cart / Details

Ring Lock Clamp for 6″ (Valve Opening Elbow)

Original price was: $36.00.Current price is: $32.76.

Clamp Lock Ring for 6" Item 7 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
Sale!

View Cart

Add to cart / Details

Roll Pin (Handle) 3″ to 6″ (Valve Opening Elbow)

Original price was: $1.75.Current price is: $1.59.

Roll Pin (Handle) 3" to 6" Item 2 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Valve Seat Ring with Conversion Tube for Foot Valve

Price range: $90.09 through $159.25
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Foot Valve Vertical Female Thread w/Conversion Tube

Price range: $256.62 through $1,376.83

Watch our video: Foot Valves Explained
Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Cast Iron B5 Butterfly Valve (Wafer/Gear)

Price range: $174.27 through $438.96

Matco Valves Special Offer. FREE FREIGHT on orders of $3000 or more from November 1st, 2025 , through December 31st, 2025. Call Cedric at 517-458-9741 for details.
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flange 90 Degree Elbow

Price range: $10.92 through $51.80

3" Flanged 90 Degree Elbow, Banjo
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Schedule 40 Wye

Price range: $105.43 through $287.04

Schedule 40 Wye (4", 6" and 8" Options)
Sale!

View Cart

Add to cart / Details

2″ Flange x 45 Degree Hose Barb

Original price was: $31.90.Current price is: $19.14.

2" Flange x 45 Degree Hose Barb
View Cart

Add to cart / Details

6NHTB Impeller Ring (White Iron)

$480.00
Wear Ring, Wear Ring for 6NHTB, 6NHTB also uses 27-A22440-6-SG that Fits in Suction Cover

Precision machined to Cornell specs

High chrome white iron castings (460 BHN hardness)

Metal 360 Inc is in no way affiliated with Cornell Pump

If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
View Cart

Add to cart / Details

Protek D0063 Upper Housing for Hand Primer for #9 Primer

$161.72

Protek D0063 Upper Housing for Hand Primer
View Cart

Add to cart / Details

Protek D0088 Upper Housing for # 7 Hand Primer

$140.47

Protek D0088 Upper Housing for Hand Primer
View Cart

Add to cart / Details

Protek D0056 Upper Housing for Hand Primer

$82.53

Protek D0056 Upper Housing for Hand Primer
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Poly Bulkhead Tank Flange Gasket

Price range: $6.25 through $11.04

Poly Bulkhead Tank Flange Gasket EPDM gasket. Brand Name: Banjo
Sale!

View Cart

Add to cart / Details

1″ 45 Degree Poly Elbow Female Thread

Original price was: $23.28.Current price is: $13.97.

1" 45 Degree Poly Elbow Female Thread. Made of heavy-duty and durable polypropylene. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Manure Strainer

Price range: $50.00 through $215.39

Manure Strainer Watch our video: Strainers Explained
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Reducing Bushing – MPT x FPT (Schedule 80) (Flush Style)

Price range: $29.06 through $76.49

PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears^® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). We stock these sizes, but additional sizes are available upon request.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

End Wye Galvanized (10 Gauge)

Price range: $141.67 through $378.00

End Wye - Galvanized (10 gauge)