-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). Previous SKU: G-00182
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
1", 1.25", 1.5" and 2" Insert Plug PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). Previous SKU: G-00179
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Superior Choice for Use with Polyethylene Pipe
Spears® PVC Insert Fittings are designed for use with either ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. Chemical and corrosion resistant, rigid PVC barbed inserts provide excellent grip with polyethylene materials.
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1).
The maximum recommended service temperature of PVC products is 140° F (60° C).
Previous SKU: G-00181
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
All thermoplastic repair couplings are constructed from white or gray Polyvinyl Chloride (PVC) Type I compound having a cell classification of 12454 conforming to ASTM D1784. All repair couplings are furnished with double O-ring seals in EPDM or FKM elastomer material. Internal Pressure: ½ - 3 inch - 235psi @ 73° F 2-1/2 – 4 inch - 200psi @ 73° F 6 inch 150psi @ 73° F Brand Name: Matco Norca
-
A PE Tube Mender is a small, durable fitting used in irrigation systems to repair or join sections of polyethylene (PE) tubing, commonly used in drip and micro-irrigation setups. This fitting restores functionality to damaged tubing, saving time and costs associated with replacing the entire line.
Features:
- Durable Construction: Made from corrosion-resistant plastic or metal, designed to withstand outdoor conditions and frequent water flow.
- Quick Repair: Allows easy insertion into the ends of damaged PE tubing, creating a secure, leak-proof connection.
- Versatile Sizes: Available in different diameters to match standard PE tubing sizes.
- Reusable Design: Can be easily installed and removed for adjustments or further repairs.
Benefits:
- Cost-Effective: Repairs damaged tubing without the need for full-line replacements.
- Ease of Use: Simple to install, requiring no special tools or skills.
- Leak Prevention: Restores the system's integrity, ensuring efficient water delivery without waste.
- System Longevity: Extends the lifespan of irrigation tubing by allowing quick fixes in the field.
-
Sale!These steel plated Hose Menders are used to fix or repair your damaged hoses. Corrosion resistant to withstand the harshest of materials. *Be sure to check out our full line of hose menders and repair couplings.* Brand Name: Kuriyama
-
This is a steel weld on hose barb for your irrigation system. Whether you need to update your existing system, or bring new parts into your system we have what you need! *Be sure to check out our full line of hose barbs and steel fabrication fittings!* Brand Name: Pierce
-
This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .5 GPM/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: G-00170 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Out of stockDrip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 7,500 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .5 GPM/100’. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Extra Discounts available for Pallet Quantities. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! Brand Name: Jain
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!Oval Hose Punch Tool 420 - Brown Handle (DP-420) Brand Name: Jain
-
Sale!250 Barb Goof Plug (MP1) - Also known as a Mistake Plug - SET OF 10 PLUGS 2 sizes per plug:
- Small Plug: shank 0.161", barb 0.214"
- Large Plug: shank 0.235", barb 0.293"
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Elbow fitting to be used with 5/8" Drip Tape. Elbows allow you to make a sharp turn which the drip tape itself is not capable of making. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Previous SKU: G-00153 Brand Names: Jain Irritec
-
Sale!5/8" Tape Loc x 400 Barb with Orange or Green Locking Ring (400B-06-LSO) Brand Names: Jain Irritec
-
Sale!5/8" Tape Loc x 250 Barb (250B-06-LS) Previous SKU: G-00178 Brand Name: Jain
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Tee fitting to be used with 5/8" Drip Tape. A tee can be used to branch off an additional line from the mainline or for an individual row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Previous SKU: G-00152 Brand Names: Jain Irritec
-
6" Aluminum Shug Grip Weld-On Male End
A 6″ Aluminum Shug Grip Weld-On Male End is a specific type of fitting used in irrigation systems to create a secure connection at the end of a pipe or hose. Here’s a detailed explanation of what it is and its uses:Description:
- Material: The fitting is made of aluminum, which is lightweight, corrosion-resistant, and durable, making it suitable for outdoor and agricultural use.
- Size: The 6″ dimension refers to the diameter of the pipe or hose that the fitting is designed to connect to.
- Type: This fitting is a male end, which means it has a protruding connector designed to fit into a female coupling or fitting.
- Shug Grip: The Shug Grip design provides a secure, often mechanically tight or threaded connection that helps create a leak-proof seal between pipes or components.
Weld-On Feature:
The weld-on characteristic means that this male end fitting is permanently attached to the pipe by welding. This method of attachment ensures a strong and stable joint that can handle the pressure and flow demands of irrigation systems without the risk of disconnection or leaking.Uses:
- Permanent Pipe Connections: The weld-on male end is typically used to create a strong, non-removable joint at the end of an irrigation pipe. This makes it ideal for mainlines or key sections of an irrigation system where reliability and durability are crucial.
- Connecting to Hoses or Couplings: The male end is designed to connect to compatible female fittings, allowing for quick assembly of the irrigation system. The Shug Grip ensures a secure fit that can be easily coupled or decoupled if necessary.
- High-Pressure Applications: The aluminum construction and weld-on installation make this fitting suitable for use in sections of the irrigation system that may experience higher pressure or more demanding conditions.
- Modular System Integration: It can be used to connect pipes to other components, such as valves, pumps, or sprinkler systems, facilitating the integration of different elements within an irrigation network.
Benefits:
- Durability: The aluminum construction provides resistance to corrosion and wear.
- Secure Connection: The Shug Grip design ensures a reliable seal to prevent water leaks.
- Stability: Being welded onto the pipe ensures that the connection remains secure over time, even under pressure or movement.
-
Available in 6" and 8" sizes as well as Plain or Flared Styles.
-
Steel Shug Grip Weld-On Coupler. Available in 6", 8", and 10" sizes. Includes gasket.
Replacement gaskets are also available for purchase. Click here.
-
Sale!Male Band & Latch x Hose Barb. Designed to enable customers to fabricate rubber hose assemblies. Multiple ring hose ends available for high pressure. *Be sure to check out our full line of Band and Latch Fittings! Brand Name: Pierce
-
Sale!Band & Latch Coupler x Hose Barb. Designed to enable customers to fabricate rubber hose assemblies. Multiple ring hose barb for high pressure. Gasket included. *Be sure to check out our full line of Band and Latch Fittings! Brand Name: Pierce
-
Sale!Male Ringlock x Hose Barb. Designed to enable customers to fabricate rubber hose assemblies. Multiple ring hose ends available for high pressure. *Be sure to check out our full line of Band and Latch Fittings! Brand Name: Pierce
-
Sale!Female Ringlock Coupler x Hose Barb. Designed to enable customers to fabricate rubber hose assemblies. Multiple ring hose ends available for high pressure. Gasket included. *Be sure to check out our full line of Band and Latch Fittings! Brand Name: Pierce
-
Line Length - 20' Dampened gauge: helps prevent “peg-out" damage Heavy-duty rubber gauge cover protects gauge face 3/8" ID hose for quick inflate/deflate Quick-dump valve for easy deflation Quick disconnect design for easy installation Designed for use with plugs with removable inflator valve and eye bolt
We also stock several sizes of Pipe Sealing Plugs.
Brand Name: Cherne -
Pipe Sealing Plug - Pneumatic Plug - Tile Sealing Plug The Cherne Test-Ball Plug (Underground) has been the contractor's choice for over 50 years and continues to be the most trusted pneumatic test ball in the industry. Designed for applications from pressure testing and blocking of residential DWV systems to repair maintenance and installation of municipal infrastructure including storm and sanitary sewer piping systems, The Cherne Pneumatic Test Balls do it all! Multi-Size Test Ball Plugs (Underground)
-
- One plug fits multiple pipe diameters.
- Made of natural rubber for excellent expansion and memory.
- Seals both round and out-of-round pipe.
- Removable inflation valve can be replaced if damaged or replaced with quick disconnect fitting.
- Use to block flow or as a back plug for sewer air testing.
- All Test-Balls are bendable to 90 degrees
Brand Name: Cherne -
-
*Note: This picture shows a gauge with the gauge protector - this is for the gauge protector only* The BEC Gauge Protector isolates harmful media from gauges and other pressure instruments. Media such as corrosive fertilizer, slurries and chemicals that can destroy or plug the gauge are separated from the gauge with a flexible diaphragm. The top of the gauge protector is aluminum and has a 1/4” NPT female port on it for connection to a pressure gauge or other instrument. The bottom is aluminum with a 1/4” NPT female port. Protect equipment from corrosive materials, hot or cold liquids, slurries, paints, fuel or oils and other media that may clog or damage. Fertilizer sprayers • Mining slurries • Concrete slurries • Manure spreaders and sprayers • Isolate media from monitor stations • Pumping media harmful to gauges • Harmful tank media head pressure Features - 1/4” NPT aluminum female top port • Flexible fluorocarbon (VITON) diaphragm • Easy field gauge replacement • Wide range of fill fluid can be used • Durable housing NOTE: Fill the area under the pressure gauge with vegetable oil or RV Antifreeze before use.
-
Gauge Protector Kit for Manure Application 3/4" FPT Port x 1/4" FPT Port NOTE: Fill the area under the pressure gauge with vegetable oil or RV Antifreeze before use. The BEC Gauge Protector isolates harmful media from gauges and other pressure instruments. Media such as corrosive fertilizer, slurries and chemicals that can destroy or plug the gauge are separated from the gauge with a flexible diaphragm. The top of the gauge protector is aluminum and has a 1/4” NPT female port on it for connection to a pressure gauge or other instrument. The bottom is aluminum with a 3/4” NPT female port. Protect equipment from corrosive materials, hot or cold liquids, slurries, paints, fuel or oils and other media that may clog or damage. Fertilizer sprayers • Mining slurries • Concrete slurries • Manure spreaders and sprayers • Isolate media from monitor stations • Pumping media harmful to gauges • Harmful tank media head pressure Features - 1/4” NPT aluminum female top port • Flexible fluorocarbon (VITON) diaphragm • Easy field gauge replacement • Wide range of fill fluid can be used • Durable housing NOTE: Fill the area under the pressure gauge with vegetable oil or RV antifreeze before use.
-
This gasket is compatible with Hydro, Bazooka Farmstar and Cadman Shug Couplers. For the 6" gaskets, we incorporate our own gasket which has been designed for a tight fit seal even under low pressure. This gasket is used on all of the Shug Grip Couplers that are 6" and smaller. The 8" gasket fits the 7" and 8" Shug Grip Couplers. Please check our our complete line of accessories for Shug Grip Couplers. Please be sure to order the correct size gasket for your needs.
