-
3/4" Stem w/ Solid Yoke for 3" to 4" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Stem w/ Solid Yoke for 5" to 6" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Venturi Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer
-
4" Widecut Vine Curl for 0.830" O.D. Tubing. Used to attach tubing to the wire. Sold in packs of 50 each. Additional sizes available by special order.
-
Galvanized steel 45-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
Please call 517-458-9741 for the very best shipping rates on this product!
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
-
Bauer Type "F" Style Galvanized Female Socket with Lever x Hose Barb The Steel Bauer Type "F" Style Galvanized Female Socket with Lever x Hose Barb is typically used with the Bauer Type “F” Style Galvanized Male Ring x Hose Barb. Please contact us for more information.
-
COUPLER HD SEGMENT SETS
- 0.900" center to center
- Nut and bolt
- Following sizes are available: 4", 4.5", 5", 5.5", 6", 7", 7.25", 8", 10" and 12"
- Type III hardcoat anodized or plain aluminum
-
Wear Ring, Wear Ring for 6NHTB, 6NHTB also uses 27-A22440-6-SG that Fits in Suction Cover
-
- Precision machined to Cornell specs
- High chrome white iron castings (460 BHN hardness)
- Metal 360 Inc is in no way affiliated with Cornell Pump
-
-
Wear Ring, Fits in Suction Cover, Wear Ring for 6NHTB, 6NHTB also uses 27-A2441-6-SG
-
This hand held watering nozzle's design allows adjustment to the exact pattern of your lawn; ensuring the landscape is precisely watered with minimal overspray waste. 8 Spray patterns:
- Shower
- Mist
- Soaker
- Angle
- Center
- Flat
- Cone
- Jet
-
Sale!8" Female x 10.25" Female Shug Grip Reducer HF Brand Name: Metal 360
-
8" Female x 10.25" Male Shug Grip Reducer HF/ US coupling Brand: Metal 360
-
Sale!8" Male x 10.25" Male Shug Grip Reducer HF Brand Name: Metal 360
-
This is used to repair PVC. Includes gaskets. Brand Name: Pierce
-
90 Degree Street Elbow Female Pipe Thread x Male Pipe Thread, SCH 40 PVC (3 Sizes Available - See Options)
-
Galvanized steel 90-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
Durable: Nitrile rubber cover increases resistance to oil, fuel, most chemicals and petrochemicals; and stands up to ozone and oxidation. Rugged: 100% high tenacity yarn, extruded with thru-the-weave nitrile rubber construction for strength and greater flow. Service Worthy: Light weight allows for fast deployment and retrieval, saving time and money. High-Performance: Rubber construction delivers maximum durability, flexibility and service life. Tested: Performance rated at -5°F to 200° F (-20°C to 93°C). Certified: Manufactured within the scope of our ISO-9001: 2015 certified quality assurance system. AG FEEDER HOSE LAY-FLAT NITRILE RUBBER HOSE
CONSTRUCTION Extruded Nitrile Cover/Liner Polyester/Nylon Reinforcement
TEMPERATURE RANGE -5° to 200°F (-20° to 93°C)
STANDARD LENGTH 660' (200M) HOSE COLORS - Black
AG Data Sheet DownloadFor pricing and availability call in today and speak with one of our Sales Associates. -
Weld-on High Pressure Ringlock. Heat treated, heavy duty cast aluminum coupler. Recommended when high pressures are required. Brand Name: Travis Pattern
-
Sale!This maintenance kit is for 2" and 3" Mini Sigmas. This maintenance kit includes the following parts:
- Item 11 - Nozzles (6)
- Item 6 - Hydraulic Seal (1)
- Item 10.1 - O-Ring Seal (1)
- Item 12.1 - O-Ring Seal (2)
- Grease Tube (1)
Click Here to view the complete Amiad Mini Sigma Parts List with a diagram.
-
Sale!This maintenance kit is for a 4" Mini Sigma. This maintenance kit includes the following parts:
- Item 11 - Nozzles (6)
- Item 6 - Hydraulic Seal (1)
- Item 10.1 - O-Ring Seal (1)
- Item 12.1 - O-Ring Seal (4)
- Grease Tube (1)
Click Here to view the complete Amiad Mini Sigma Parts List with a diagram.
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
Premium Row Crop Drip Tape Note: This is a special order item and ships directly from the manufacturer. For more details, please call us at 517-458-9741. Next generation Tru-Flo turbulent flow pathway technology—the result of over 35 years of turbulent flow research, development and manufacturing from Bowsmith. • Unsurpassed clog resistance is achieved when combined with the innovative and unique water inlet filters design. • The superior technology of BigFoot 3.0 delivers reliability, uniformity and maximizes crop yields. • The BigFoot 3.0 continuous precision molded flow path and seamless construction, provides both strength and reliability during installation and retrieval. • Available in 0.05 to 1.50, Q/100 (gpm/100 ft) flow rates. • Available emitter spacing (in) of 4, 6, 8, 12, 16, 18, 20, 24. - No additional cost for closer emitter spacing. • Various wall thickness (mil) available for seasonal, or multi-season (SDI) applications. • The precision cut, outlet slit, provides superior protection against soil ingestion and root intrusion. • Bright white stripes “up” insures proper outlet placement, and makes it easy to find for the field workers. • No other drip tape matches the performance of BigFoot 3.0. General Specifications: Flow Rates (GPM/100ft) @ 8 psi .05, .06, .07, .08 .10, .11, .12, .13, .17, .19, .20, .22, .23, .25, .26, .34, .35, .38, .45, .52, .67, .75, 1.05, 1.34 Standard Spacings (in) 4, 6, 8, 12 Additional Spacings (in) 16, 18, 20, 24 Nominal Diameters (in) 5/8, 7/8 5/8 Tape Wall Thickness (mil) 5, 6, 8, 10, 12, 15 7/8 Tape Wall Thickness (mil) 5, 6, 8, 10, 12, 15 Outlet Knife Cut Slit Product Guide BigFoot_DripTape_p2 Product Configurations BigFoot_Brochure_3 Run Length Guides BigFoot_DripTape_p4
-
“PCI” Series Pressure Compensating Inline Drip Tubing Note: This is a special order item and ships directly from the manufacturer. For more details, please call us at 517-458-9741.
- Features: Unique flow regulating concept: wide effective labyrinth, leading into the flow control chamber, where a sensitive floating diaphragm regulates and maintains a constant flow rate at variable inlet pressure. Uniform flows from 7-60 PSI. Manufactured from high-quality resins. Contains a minimum of 2% carbon black. Available in standard, custom, or skip spacing.
-
“PCI” Series Pressure Compensating Inline Drip Tubing Note: This is a special order item and ships directly from the manufacturer. For more details, please call us at 517-458-9741.
- Features: Unique flow regulating concept: wide effective labyrinth, leading into the flow control chamber, where a sensitive floating diaphragm regulates and maintains a constant flow rate at variable inlet pressure. Uniform flows from 7-60 PSI. Manufactured from high-quality resins. Contains a minimum of 2% carbon black. Available in standard, custom, or skip spacing.
-
The Bowsmith NonStop emitter design, patented in 1974, is based on a simple unique principle found in no other emitter. This Pressure Cascade Principle permits the emitter to tolerate large amounts of suspended solids in irrigation water, without clogging and without the need for fine-mesh filter screens.
For over 40 years, millions of Bowsmith NonStop emitters have demonstrated that the unique NonStop Continuous Flushing Action (Pressure Cascade Principle) really works, even under conditions that would quickly clog ordinary emitters. With only 30-mesh filtration, Bowsmith NonStop emitters have operated successfully with water containing heavy concentrations of sand, silt, iron bacteria "slime", calcium carbonates, even algae and moss.
To the grower and contractor this means:• Reduction in plant loss and stress.
• Lower capital investment in filtration equipment.
• Lower labor costs for filter maintenance and overall system maintenance.
The use of very fine mesh screen (140 - 200 mesh) filtration that is necessary for
ordinary emitters is not recommended for Bowsmith NonStop emitters.
Why? Because of the necessity for frequent cleaning of the filters. -
Available with EPDM or FKM (viton type) gasket. Double-sided female NPT threads.
-
Call for special pricing today! Ask for Cedric. 517-458-9741 Details
- Hose I.D, & Length: 4″ x 1250′
- G.P.M: 400 – 600
- Axle: 2-C
- Weight: 8,800 lbs.
- Honda OHV 5.5 HP Engine
- Automatic Gun Cart Stop
- Disc Brake to Prevent Hose Recoil
- Slewing Ring Turntable
- Hose Build-Up Safety Switch
-
Galvanized steel riser valve tee works perfectly as an in-line valve for air relief. Manufacturer warranty included. Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Please call and speak with one of our Sales Specialist about Size, Price and Availability.
