-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Rain Control couplers. Made of long lasting, durable rubber. Fits Rain Control Couplers Check out all of our commercial grade irrigation gaskets.
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Tee fitting to be used with 5/8" Drip Tape. A tee can be used to branch off an additional line from the mainline or for an individual row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Previous SKU: G-00152 Brand Names: Jain
Irritec 
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Rainway couplers. Made of long lasting, durable rubber. Fits ROUND Rainway Couplers Check out all of our commercial grade irrigation gaskets.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!This is for a bolt and nut for a strainer on an Intake Coupler. You will need to know the size of your intake Coupler in order to order this. **This is ordered by the size of the intake coupler not the length of the bolt** *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
Sale!This is a flange bolt and nut for a suction elbow on a foot valve. The same flange bolt and nut are used for a 2", 3", 4", 5", 6" and 8" foot valve suction elbow. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
3/8" O-Ring specifically designed to seal the connection between aluminum tubing and Bolt-On Couplers. Made of long lasting, durable rubber. Fits all 2", 3", 4", 5", or 6" O-Ring Bolt-On Couplers. Check out all of our commercial grade irrigation gaskets.
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Shur-Rane couplers. Made of long lasting, durable rubber. Fits Shur-Rane Couplers We stock only 3" and 4" gaskets of this style, but have access to additional sizes from our vendor. Please call for more details. Check out all of our commercial grade irrigation gaskets.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!
Very easy to install tubing over single barb
Positive stop to assure tubing is fully installed
Low effort, square thread drive ring quickly locks tubing in place — no tools needed
Barb design ensures tubing will not slip out or blow off at high pressure and temperature
Each fitting will accommodate a wide range of hose diameter and wall thickness
Working pressure: 60 psi
To connect Total CV and polyethylene supply tubing
Fits a wide range of tubing ID and wall thicknesses (see chart below)
Brand Names: JainFitting Series # Acceptable I.D. (Inches) Acceptable I.D.(Millimeters) Acceptable Wall Thickness (Inches) Acceptable Wall Thickness (Millimeters) 55 0.520 to 0.620 13.2 to 15.7 0.045 to 0.055 1.14 to 1.40 70 0.665 to 0.765 16.9 to 19.4 0.035 to 0.055 0.89 to 1.40 80 0.790 to 0.845 20.1 to 21.5 0.045 to 0.065 1.14 to 1.65 100 1.035 to 1.075 26.3 to 27.3 0.062 to 0.075 1.57 to 1.91
Irritec
-
Sleeve Couplings are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!Chevron Rubber Gasket for 8" Item 4 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!The Netbow Ring is designed specifically for the high value container grower. The 5" Netbow features 4 evenly spaced drip points and the 10" Netbow features 8 evenly spaced drip points for uniform water coverage circling the plants root base, providing optimal root zone development. Features Compatible with 10 to 60 liters (2-15 gallons) containers Diameter: 120mm (5 in), 250mm (10 in) Outlets: 4 or 8 dripping outlets (Flow is determined by the hub dripper) Excellent Chemical and UV resistance for extended durability Light gray color for maximum light reflection Maximum operating pressure: 4.0 bars (58.0 PSI) Flow Rate: 4 or 8 dripping outlets with flow of 2.0I/h 0.53 GPH each at 1.0 bar (14.5 PSI) Uniform surface wetting for optimal root development Easy installation Clog resistant
-
PVC 90 Degree Elbow Insert X Female Pipe Thread, SCH 40 PVC (Multiple Sizes Available - See Options)
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones.
-
Sale!Chevron Rubber Gasket for 3" to 6" Item 4 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring Bail 3" to 8" Item 9 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Bushings are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Missing a Cap Screw to your Shug Grip Double Bolt Clamp or Shug Grip Coupler Set? 3/8" - 16 x 1-3/4" ASTM F837 Grade 18-8 Stainless Steel
-
Sale!These nozzles are for a Komet 162 FC or Komet 163 PC Sprinkler.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!Black Flat Welding Disc. Made out of a heavy-duty and durable steel. *Be sure to check out our full line of Steel Fabrication Parts! Brand Name: Pierce
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Mushroom Drain A mushroom drain is a type of surface drainage fitting that resembles the shape of a mushroom. It is typically installed at ground level in fields, gardens, or areas prone to water accumulation. The drain is designed to collect excess surface water and direct it into an underground drainage system, helping to prevent waterlogging and maintain optimal soil conditions for crops. The mushroom-shaped cap allows water to flow in while preventing debris, soil, and other materials from clogging the drain. This ensures efficient water runoff management, which is crucial for protecting crops from excess moisture that can lead to root rot, soil erosion, and reduced plant health. Mushroom drains are essential components in farm drainage systems, promoting better water control and contributing to healthier, more productive farmland.
-
PVC 90 deg Elbow Insert x MIPT, SCH 40, PVC (Multiple Sizes Available - See Options)
-
Sale!Plug- Threaded
- Excellent chemical resistance.
- Glass reinforced polypropylene.
- Heavy duty (Schedule 80).
- Lightweight with excellent strength.
- NPT threads.
- Pressure to 150 P.S.I. at 70°F.
-
1", 1.25", 1.5" and 2" Insert Plug PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). Previous SKU: G-00179
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). Previous SKU: G-00182
-
Bell Reducers are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
-
Missing a Lynch Pin to your Shug Grip Heavy Duty Ringlock Clamp? These quick disconnect fasteners are designed with a solid pin and self-locking ring. This ring allows the pin to be securely held in place and provides an easy grip for quick removal.
-
Check Valve (Disk) for all Protek hand primers. Made out of a durable rubber. Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Sale!This is a bolt, nut and washer for the intake coupler. You need to know the size of your intake coupler in order to order correctly. *The number reflects the size of the intake coupler not the length of the bolt.* *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
