Shop Irrigation Parts

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

45 Degree Elbow – IPS – Galvanized

Price range: $104.65 through $278.22
Thrust-Blocking PVC Pipe

Water under pressure exerts thrust forces in piping systems at: changes in pipe size or direction, dead ends and valves.

The design of thrust-blocking requires knowledge of the thrust generated and the bearing strength of the soil against which the thrust block will be placed.

To be effective, a thrust block must:

be placed against undisturbed or fully compacted earth.

contact the fitting over a sufficiently large area so as not to create stress points on the fitting.

have sufficient area on the soil to restrain the thrust without exceeding the bearing strength of the soil.

Supply line 3" in diameter and larger shall receive concrete thrust blocks. Please research specifications for amount of concrete to be used for thrust block.

This elbow provides a 45 degree change of direction on PVC pipe. Includes gaskets. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

90 Degree Elbow – IPS – Galvanized

Price range: $164.19 through $333.59
Thrust-Blocking PVC Pipe

Water under pressure exerts thrust forces in piping systems at: changes in pipe size or direction, dead ends and valves.

The design of thrust-blocking requires knowledge of the thrust generated and the bearing strength of the soil against which the thrust block will be placed.

To be effective, a thrust block must:

be placed against undisturbed or fully compacted earth.

contact the fitting over a sufficiently large area so as not to create stress points on the fitting.

have sufficient area on the soil to restrain the thrust without exceeding the bearing strength of the soil.

Supply line 3" in diameter and larger shall receive concrete thrust blocks. Please research specifications for amount of concrete to be used for thrust block.

This elbow provides a 90 degree change of direction on PVC pipe. Includes gaskets. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flange Adapter (Flange x Female Ringlock) – Galvanized

Price range: $93.34 through $114.87

Flange Adapter (Flange x Ringlock Female) - Galvanized Bolts onto steel, aluminum or plastic flange, to transition from steel to Ringlock fittings or pipe. This flange adapter can also be used to insert a flanged valve into a system. Includes gasket. We also carry the Flange Adapter (Flange x Ringlock Male).
*The terms Ringlock and Circle Lock are used interchangeably on our website*
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flanged 90° Elbow – Galvanized

Price range: $216.82 through $287.18

Flanged 90° Elbow - Galvanized The flanged 90° Elbow - Galvanized bolts onto a steel flange, aluminum flange or plastic flange. We stock 6" and 8" Flanged 90° Elbow - Galvanized here at IrrigationSupplyParts.com, but have access to additional sizes. Please call us if you have questions or require a different size.
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flanged Tee – Galvanized

Price range: $301.53 through $412.22

Flanged Tee - Galvanized The flanged tee bolts onto a steel flange, aluminum flange or plastic flange. This flanged tee can be used as an end tee or inline tee depending on your needs. We stock 6" and 8" flanged tees here at IrrigationSupplyParts.com, but have access to additional sizes. Please call us if you have questions or require a different size.
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flange Adapter (Flange x Male Ringlock) – Galvanized

Price range: $91.90 through $114.87

Flange Adapter (Flange x Ringlock Male) - Galvanized Bolts onto steel, aluminum or plastic flange, to transition from steel to Ringlock fittings or pipe. This flange adapter can also be used to insert a flanged valve into a system. We also carry the Flange Adapter (Flange x Ringlock Female). (The terms Ringlock and Circle Lock are used interchangeably on our website.)
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flange Adapter (Flange x MPT) – Galvanized

Price range: $114.87 through $215.39

Flange Adapter (Flange x MPT) - Galvanized Bolts onto steel, aluminum or plastic flange, to transition from steel to threaded fittings or pipe. This flange adapter can also be used to insert a flanged valve into a system. We also carry the Flange Adapter (Flange x Ringlock Female) and Flange Adapter (Flange x Ringlock Male). (The terms Ringlock and Circle Lock are used interchangeably on our website.)
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flange Adapter (Flange x IPS Bell) – Galvanized

Price range: $62.58 through $221.56

Available in 4", 6", & 8" sizes Bolts onto steel or plastic flange, to transition from steel to PVC. Includes gasket. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Weld-On Starter Coupler IPS – Galvanized

Price range: $33.47 through $50.54

Available in 6" or 8" sizes Welds to steel pipe to transition from steel to PVC. Includes gasket. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

End Cap for – Galvanized

Price range: $33.67 through $80.80

End Cap for PVC - Galvanized - Used on end of PVC line to stop water flow. Includes gasket. Available in 4", 6" & 8" sizes. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

End Cap for IPS PVC – Galvanized

Price range: $61.59 through $102.17

This is used on the end of IPS PVC lines to stop water flow. Includes gasket. They are available in 6" IPS & 8" IPS sizes. PIP sizes are available by special order. Please call for more information. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Straight Tee for PVC – Galvanized

Price range: $118.30 through $272.47
Thrust-Blocking PVC Pipe

Water under pressure exerts thrust forces in piping systems at: changes in pipe size or direction, dead ends and valves.

The design of thrust-blocking requires knowledge of the thrust generated and the bearing strength of the soil against which the thrust block will be placed.

To be effective, a thrust block must:

be placed against undisturbed or fully compacted earth.

contact the fitting over a sufficiently large area so as not to create stress points on the fitting.

have sufficient area on the soil to restrain the thrust without exceeding the bearing strength of the soil.

Supply line 3" in diameter and larger shall receive concrete thrust blocks. Please research specifications for amount of concrete to be used for thrust block.

This is used to form a 90 Degree branch from the mainline that is underground. Includes gaskets. Available in 4", 6" & 8" sizes Brand Name: Pierce
View Cart

Add to cart / Details

6″ Doda Male x Hose Shank – Galvanized – 150mm

$127.18

6" Doda Male x Hose Shank - Galvanized - 150mm Brand Name: Doda
View Cart

Add to cart / Details

6″ Doda 2-Hook Coupler with O-Ring – Black – 150mm

$69.18

6" Doda 2-Hook Coupler with O-Ring - 150mm Brand Name: Doda
View Cart

Add to cart / Details

6″ Doda 3-Hook Coupler with O-Ring – Black – 150mm

$64.24

6" Doda 3-Hook Coupler with O-Ring - 150mm Brand Name: Doda
View Cart

Add to cart / Details

6″ Doda Locking Ring – Black – 150mm

$27.70

6" Doda Locking Ring - Black - 150mm This Locking Ring does not include the male ball. The 6" Weld On Male Ball is sold separately. Brand Name: Doda
View Cart

Add to cart / Details

6″ Doda Weld On Male Ball – Black – 150mm

$31.18

6" Doda Weld On Male Ball - 150mm This Weld On Male Ball does not include the ring. The 6" Locking Ring is sold separately. Brand Name: Doda
View Cart

Add to cart / Details

6″ Doda O-Ring – 150mm (GTP138)

$11.04

6" Doda O-Ring - 150mm Brand Name: Doda
View Cart

Add to cart / Details

1″ Air/Vacuum Relief Valve

$12.32
Description Air/Vacuum Relief Valves deliver optimum performance and increased efficiency of an irrigation system by preventing air-lock problems and back suctioning of debris into the lines. The Air/Vacuum Relief Valve allows air to escape during the system’s initial start and until the pipe or drip lines are full of water. It also allows air to enter back into the system when the zone is turned off. The Air/Vacuum Relief Valve helps prevent clogging in sub-surface drip irrigation systems resulting from back suction of debris under vacuum conditions. Install the Air Vacuum Relief Valve at the highest point of a drip line installation. Features:

Reduces maintenance requirements and extend drip system life

Smooth and reliable operation

Eliminates air pockets within a system zone

Releases air from the drip line when the zone is turned on

Allow air to freely enter the system when the zone is shut down

Ball float design offers perfect sealing under very low system pressure

Easy to handle and maintain

Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions

Install the Air Vacuum Relief Valve after the drip zone, along the drip line laterals and at the highest point in the drip system layout. Install one Air Vacuum Relief Valve per zone or per each 10 GPM Brand Name: Irritec For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
Sale!

View Cart

Add to cart / Details

2″ Continuous Air Release Valve

Original price was: $187.19.Current price is: $140.39.

Continuous Automatic Air Vent/Vacuum Relief Valve: Manages air intake and release from irrigation lines ensuring long life High quality UV protected nylon, corrosion resistant Smooth opening and closing Continuous Air Vents maximum operating pressure: 145 PSI
View Cart

Add to cart / Details

3/4″ 90 Degree Street Elbow

$2.13

3/4" 90 Degree Street Elbow (MIPT x FIPT) - Schedule 40 PVC
View Cart

Add to cart / Details

Backflow Preventer (3/4″ FHT x 3/4″ MHT)

$4.27

Backflow Preventer (3/4" FHT x 3/4" MHT) A backflow preventer is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices. It comes with a 3/4″ FHT inlet and a 3/4″ MHT outlet. No Teflon tape is required since both ends are hose thread. A standard hose washer is included to make a water tight seal. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
View Cart

Add to cart / Details

Hose Swivel (3/4″ FHT x 3/4″ FPT)

$8.11

Hose Swivel (3/4" FHT x 3/4" FPT) 3/4″ Hose Swivel attaches to a hose bib, faucet, spigot, hydrant, garden hose or hose threaded parts (like filters and pressure regulators) and accepts fittings with 3/4″ male hose threads (MHT). Previous SKU: G-00172 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Oval Hose

Price range: $80.44 through $173.60
Larger diameter used as main & sub-main and smaller diameter as laterals in drip/micro irrigation system.

1.5" Oval Hose with 21 PSI 300' roll

2" Oval Hose with 0.051" Wall/21 PSI. 450' roll

3" Oval Hose with 0.076" Wall/21 PSI. 200' roll

4" Oval Hose with 0.100" Wall/21 PSI. 130' roll

Jain Oval Hose is manufactured from virgin LLDPE using advanced extrusion technology. The characteristics of LLDPE provide durable tubing with close dimensional tolerances. Once pressurized Jain Oval Hose becomes 98% round.

Features and Specifications

Manufactured from virgin LLDPE using advanced extrusion technology.

Excellent characteristics of LLDPE provide durable tubing with close dimensional tolerances.

Jain Oval Hose once pressurized becomes 98% round.

Suitable for surface as well as subsurface installation.

UV stabilized. No environmental effects.

Each batch passes through following stringent quality tests to ensure efficient and trouble free performance. - Dimensional tolerances. - Short term & long term hydraulic pressure. - Heat reversion. - Carbon black content. - Environmental stress crack resistance (ESCR). - Tensile Strength and Elongation.

Best environmental stress crack resistance.

Oval shape reduces freight and storage cost.

Tested as per ASAE standard.

Brand Name: Jain
View Cart

Add to cart / Details

Pressure Regulator – 10 PSI (1-1/4″ FPT x 1″ FPT)

$21.90

Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control.
Senninger’s High Flow Pressure Regulator is ideal for installations requiring higher flows including solid set sprinkler, low volume manifolds and mechanical-move irrigation systems. Senninger regulators maintain a constant preset outlet pressure while handling varying inlet pressures.

Features: ■ Maintains a constant preset outlet pressure while handling varying inlet pressures ■ Very low hysteresis and friction losses ■ Maximum flow path resists plugging ■ 100% water-tested for accuracy (no adjustments ever needed) ■ Two-year warranty on materials, workmanship and performance

Brand Name: Jain For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
View Cart

Add to cart / Details

Pressure Regulator – 15 PSI (1″ FPT x 1″ FPT)

$21.90

Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control.
The medium flow Pressure-Master Regulator® is ideal for installations requiring midrange flows [2 - 20 gpm] including solid-set, drip or other low-volume irrigation systems as well as center pivot and other mechanical-move irrigation systems.

Features: ■ Maintains a constant preset outlet pressure while handling varying inlet pressures ■ Very low hysteresis and friction losses ■ Maximum flow path resists plugging ■ 100% water-tested for accuracy (no adjustments ever needed) ■ Two-year warranty on materials, workmanship AND performance ■ Can be installed above or below ground.

For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
View Cart

Add to cart / Details

Pressure Regulator – 20 PSI (3/4″ FPT)

$16.68

Pressure Regulator - 20 PSI (3/4" FPT) Creating consistency in an irrigation system is going to make design and installation much easier. In addition, stabilizing the pressure in individual irrigation lines is going to provide the perfect environment for emission devices to distribute water evenly. All applications should have some form of pressure regulation, whether it's point source watering or overhead to keep variable under control. Brand Name: Nelson For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
Sale!

View Cart

Add to cart / Details

6″x6″x4″ Mainline To Lateral Valve Tee – B&L

Original price was: $243.00.Current price is: $221.13.

6" x 6" x 4" Mainline To Lateral Valve Tee - B&L allows valve stub to be located where needed. This band and latch fitting is galvanized. Roundback gasket included. Brand Name: Pierce
Sale!

View Cart

Add to cart / Details

6″x6″x4″ Mainline To Lateral Valve Tee – Ringlock

Original price was: $227.90.Current price is: $207.39.

6" x 6" x 4" Mainline To Lateral Valve Tee - Ringlock allows valve stub to be located where needed. This ringlock fitting is galvanized. Roundback gasket included. Brand Name: Pierce

Sale!

Valve Opening Elbow, VOE, Pierce VOE, Valve Opener

Valve Opening Elbow – Steel

Valve Opener, Valve Opening Elbow, VOE, Valve Opener Repair Parts

This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ring lock (except the 3" size which is Band & Latch only). Gasket included. We stock some of these replacement items, but have not added them to the online store at this time. Please call us (517-458-09741) with questions or to place an order for replacement parts. See parts list below.

Description	Figure #	Part #
Handle with Collar for 3" to 6"	1	03-P1681-01
Handle with Collar for 8"	1	03-P1774-01
Roll Pin (Handle) for 3" to 6"	2	03-P2107-06
Roll Pin (Handle) for 8"	2	03-P2107-01
3/4" Stem with Solid Yoke for 3" to 4"	3	03-P1191-01
3/4" Stem with Solid Yoke for 5" to 6"	3	03-P1191-02
1" Stem with Solid Yoke for 8"	3	03-P1683-01
Chevron Rubber Gasket for 3" to 6"	4	03-P2100-01
Chevron Rubber Gasket for 8"	4	03-P2101-01
1/4" Lock Nut	6	03-P2031-02
Clamp Lock Ring for 3"	7	03-P1679-01
Clamp Lock Ring for 4"	7	03-P1679-02
Clamp Lock Ring for 5"	7	03-P1679-03
Clamp Lock Ring for 6"	7	03-P1679-04
Clamp Lock Ring for 8"	7	03-P1679-05
Clamp Lock Bolt 1/4" x 3-1/2"	8	03-P2018-10
Clamp Lock Ring Bail for 3" to 8"	9	03-P2308-01
VOE Stem Yoke (Clutch) for 3" to 6"	10	03-YFV090-02503C
VOE Stem Yoke (Clutch) for 8"	10	03-F090-02508C

Brand Name: Pierce

In irrigation systems, a Valve Opening Elbow – Steel is a specialized pipe fitting used to connect valves to the piping system at an angle, usually 90 degrees. These elbows are made of steel for durability and strength, ensuring they can withstand the pressures and conditions typical of irrigation systems. Here are the primary uses and benefits of Valve Opening Elbows in irrigation:

Primary Uses:

Change Direction: They enable the pipeline to change direction smoothly without causing significant pressure drops or turbulence. This is especially useful when space constraints or design requirements necessitate a change in the pipeline direction.
Valve Integration: Valve Opening Elbows are specifically designed to facilitate the integration of valves into the pipeline. By incorporating a valve into the elbow, the system can have a streamlined design, reducing the number of connections and potential leak points.
Accessibility: Placing a valve at an elbow makes it more accessible for operation and maintenance. This is particularly useful in irrigation systems where valves may need to be frequently adjusted or serviced.
Space Efficiency: In confined spaces or complex irrigation layouts, Valve Opening Elbows help in optimizing the use of space, allowing for a more compact and organized piping system.
Strength and Durability: Steel construction ensures that the elbows are robust and can handle high-pressure situations without deforming or failing. This is crucial for maintaining the integrity and reliability of the irrigation system.

Benefits:

Reduced Leakage: Fewer connections mean fewer potential points for leaks. A Valve Opening Elbow with an integrated valve reduces the number of joints, which can enhance the overall leak-proof nature of the system.
Ease of Installation: Combining an elbow and a valve in a single piece simplifies the installation process, saving time and reducing the complexity of the plumbing work.
Long Service Life: The steel material provides resistance to wear, corrosion, and environmental factors, ensuring a long service life even under harsh irrigation conditions.
Operational Efficiency: These fittings improve the efficiency of the system by ensuring smooth flow transitions and easy valve operations, contributing to the overall performance and reliability of the irrigation setup.

In summary, Valve Opening Elbows – Steel are vital components in irrigation systems, used to direct flow, integrate valves efficiently, and ensure the durability and reliability of the piping infrastructure.

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

IPS Repair Coupler – Galvanized

Price range: $126.67 through $159.11

This is used to repair PVC. Includes gaskets. Brand Name: Pierce
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Quick Patch

Price range: $16.14 through $69.19

Quick Patch a very unique, easy-to-use UV or sunlight activated, self-adhesive repair patch. It is fiberglass reinforced polyester with extremely good adhesion properties for long lasting repairs. Quick Patch is non-flammable, non-toxic and adhesive is not harmful to skin. Easy to apply, no mixing, no weighing - one step no mess. "Plumber's Pal...Farmer's Friend...Mechanic's Mate...Builder's Buddy...this patch does it all"
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

45 Degree Black Sweeping Elbow

Price range: $37.31 through $64.61

These 45 Degree black sweeping elbows are made of 14 gauge material. Brand Name: Pierce
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

90 Degree Black Sweeping Elbow

Price range: $34.58 through $87.36

These 90 Degree black sweeping elbows are made of 14 gauge material. Brand Name: Pierce
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

45 Degree Welding Elbow – Schedule 40

Price range: $13.65 through $160.65

45 Degree Welding Elbow - Schedule 40 Available in 3", 4", 5", 6", 8", & 10" sizes Brand Name: Matco Norca
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

90 Degree Welding Elbow – Schedule 40

Price range: $23.24 through $320.25

Long Radius 90 Degree Welding Elbow - Schedule 40 Available in 3", 4", 5", 6", 8" & 10" sizes Brand Name: Matco Norca
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

90 Degree Welding Elbow Short Radius- Schedule 40

Price range: $112.40 through $186.30

Short Radius 90 Degree Welding Elbow - Schedule 40 Available in 6", 8" & 10" sizes Brand Name: Matco Norca
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Eccentric Reducer – Schedule 40

Price range: $93.56 through $122.72

Eccentric Reducer - Carbon Steel Weld Fitting - Schedule 40
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Long Radius 90 Degree Elbow – Schedule 10

Price range: $14.95 through $280.40
Long Radius 90 Degree Elbow - Schedule 10 - Carbon Steel Weld Fitting The Long Radius 90 Degree Elbow – Schedule 10 is a specialized pipe fitting designed for irrigation, plumbing, and fluid transfer systems to redirect water flow with minimal resistance. Its long radius design provides a smoother flow path compared to standard elbows, reducing turbulence and pressure loss.
Features:

90-Degree Long Radius Design: Provides a gradual directional change, promoting efficient water flow and minimizing pressure drop.

Schedule 10 Specification: Indicates a thinner wall thickness, making it lightweight while still suitable for low to medium-pressure systems.

Durable Construction: Often made from materials like stainless steel or galvanized steel, ensuring longevity and resistance to wear.

Corrosion Resistance: Suitable for outdoor and agricultural environments, offering protection against moisture and harsh conditions.

Versatile Compatibility: Fits a variety of irrigation and fluid handling systems.

Benefits:

Improved Flow Efficiency: The long radius design reduces friction and turbulence, maintaining consistent flow rates.

Reduced Wear and Tear: Minimizes stress on the system, extending the lifespan of pipes and connected components.

Lightweight Construction: Easier to handle and install compared to fittings with thicker walls, saving time and effort.

Cost-Effective Solution: Ideal for low-pressure systems where durability and efficiency are key without the need for heavy-duty specifications.

Flexible Applications: Perfect for irrigation systems, water transfer setups, and other fluid transport applications.

The Long Radius 90 Degree Elbow – Schedule 10 is a reliable and efficient fitting, ensuring smooth water flow while offering durability and ease of installation for farming and irrigation needs.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

45 Degree Elbow – Schedule 10

Price range: $38.12 through $70.00

45 Degree Elbow - Schedule 10 - Carbon Steel Weld Fitting - 4" 45 Degree Elbow = 4" OD, 3 5/8 ID 6" 45 Degree Elbow = 6" OD, 5 1/2" ID 8" 45 Degree Elbow = 8" OD, 7 1/2" ID
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Concentric Reducer – Schedule 10

Price range: $40.00 through $63.36

Concentric Reducer - Steel Weld Fitting - Schedule 10
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Concentric Reducer – Schedule 40

Price range: $41.28 through $118.53

Concentric Reducer - Carbon Steel Weld Fitting - Schedule 40 Brand Name: Matco Norca
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Welding Wye – Schedule 40

Price range: $385.00 through $492.00

Carbon Steel Welding Wye - Schedule 40 3", 6" and 8" available to be shipped via UPS. 10" in stock and ready to ship via freight truck due to weighing over 100 pounds each. Please call for a freight quote.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Welding Tee – Schedule 40

Price range: $58.65 through $343.98

Carbon Steel Welding Tee - Schedule 40 4", 5", 6" 8" and 10" available to be shipped via UPS. 10" in stock and ready to ship via freight truck if ordering more than one due to its weight. Please call for a freight quote. Brand Name: Matco Norca

Sale!

Foot Valve 45 Degree Companion Flange, Foot Valve, Foot Valve with Companion Flange

View Cart

Select options / Details

Foot Valve 45 Degree Companion Flange

This 45 Degree Companion Flange Foot Valve is made out of lightweight and durable aluminum. This foot valve matches the bolt pattern of a standard 125 pound cast iron companion flange or a schedule 80 PVC flange. Ample space is provided for the valve flapper to get out of the water stream, and the full size opening means minimum friction loss. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.

Head Pressure for Foot Valve

Standard (45 Degree) Companion Flange
Part No.	Height	Width	Weight	Screen Ht.	Screen Dia.	Open Area	Seat Bolts Req'd	Screen Bolts Req'd	Screen Bolt Dim.	Flange Bolts
SFV2-CF	12-1/2	6	6-1/2	2-5/8	5	16	3	(3)	1/4 x 4	4 (not provided)
SFV3-CF	13	7-1/2	9	4-1/2	6	34	4	(3)	1/4 x 6	4 (not provided)
SFV4-CF	17	9	15	6-1/2	7-1/4	61	5	(3)	1/4 x 8	8 (not provided)
SFV5-CF	18-1/2	10	19-1/2	7-3/8	8-3/8	78	7	(3)	1/4 x 9	8 (not provided)
SFV6-CF	21-1/2	11	23	8-3/8	9-1/4	97	8	(3)	1/4 x 10	8 (not provided)
SFV8-CF	29	13-1/2	41	13-1/2	11-1/4	190	11	(3)	1/4 x 15-3/8	8 (not provided)
SFV10-CF	39	17	58	21	13-5/8	359	12	(4)	1/4 x 22-7/8	12 (not provided)

*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*

Watch our video: Foot Valves Explained

Brand Name: Sure-Flo Fittings

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Foot Valve 45 Degree OD Tubing

Price range: $208.39 through $1,254.89
A Foot Valve 45 Degree OD Tubing is a specialized valve installed at the bottom of a suction line in irrigation or water transfer systems. It is designed to maintain pump priming by preventing water from flowing back out of the line when the pump is not in operation. The 45-degree orientation allows for smoother flow dynamics, reducing resistance and improving efficiency.
Benefits:

Prevents Backflow: Ensures that water stays in the suction line, keeping the pump primed and ready for operation.

Efficient Pump Operation: Reduces the time and effort needed to reprime the pump, saving energy and minimizing downtime.

Smoother Flow: The 45-degree angle promotes efficient water entry and reduces turbulence, enhancing overall system performance.

Protects the System: Acts as a strainer to prevent debris and sediment from entering the pump, reducing wear and tear.

Durability: Typically constructed from corrosion-resistant materials to withstand harsh agricultural conditions and extended use.

Functionality:

Installed at the suction point of a pipeline, the foot valve opens when the pump is operating, allowing water to flow through.

When the pump stops, the valve closes automatically, preventing water from draining back and ensuring the line remains full.

This type of foot valve is commonly used in irrigation, water transfer, and pumping systems, offering reliability, efficiency, and protection for the pump and the overall setup.

Sale!

Foot Valve Vertical Campanion Flange, Vertical Foot Valve

View Cart

Select options / Details

Foot Valve Vertical Companion Flange

This Vertical Companion Flange Foot Valve is made out of lightweight and durable aluminum. Ample space is provided for the valve flapper to get out of the water stream, and the full size opening means minimum friction loss. This foot valve matches the bolt pattern of a standard 125 pound cast iron companion flange or a schedule 80 PVC flange. The hump on the body must face up when it is used in a horizontal or near horizontal position. Please see the chart for available sizes. We can get the 10" and 12" from our vendor but we have to call to get cost, freight costs and estimated ship times. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.

Head Pressure for Foot Valve

Vertical Companion Flange Foot Valve
Part No.	Height	Width	Weight	Screen Ht.	Screen Dia.	Open Area	Seat Bolts Req'd	Screen Bolts Req'd	Screen Bolt Dim.	Flange Bolts
SFVV2-CF	7-3/4	6	6	2-5/8	5	16	3	(3)	1/4 x 4	4 (not provided)
SFVV3-CF	11	7-1/2	7-1/2	4-1/2	6	34	4	(3)	1/4 x 6	4 (not provided)
SFVV4-CF	15	9	15	6-1/2	7-1/4	61	5	(3)	1/4 x 8	8 (not provided)
SFVV5-CF	17-1/2	10	21	7-3/8	8-3/8	78	7	(3)	1/4 x 9	8 (not provided)
SFVV6-CF	19	11	21	8-3/8	9-1/4	97	8	(3)	1/4 x 10	8 (not provided)
SFVV8-CF	28	14	44	13-1/2	11-1/4	190	11	(3)	1/4 x 15-3/8	8 (not provided)
SFVV10-CF	37	17	61	21	13-5/8	359	12	(4)	1/4 x 22-7/8	12 (not provided)
SFVV12-CF	55	22-1/2	132	36	22	972	16	(4)	"1"" alum. pipe"	12 (not provided)

*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*

Watch our video: Foot Valves Explained

Brand Name: Sure-Flo Fittings

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Foot Valve Vertical Companion Flange w/Conversion Tube

Price range: $331.24 through $1,289.47

Watch our video: Foot Valves Explained
To be used with Sure-Flo Self-Cleaning Strainers. They can be used with a single drive or dual drive model. A conversion tube connects the foot valve to the strainer. The conversion tube easily slides over the strainer neck and is firmly secured with pre-installed stainless bolts. This foot valve matches the bolt pattern of a standard 125 pound cast iron companion flange or a schedule 80 PVC flange. On one end there is a conversion tube and on the other end is ANSI 125 lb Flange. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve

*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*
Brand Name: Sure-Flo Fittings
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Foot Valve Vertical Female Thread w/Conversion Tube

Price range: $256.62 through $1,376.83

Watch our video: Foot Valves Explained
Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Foot Valve Vertical OD Tubing w/Conversion Tube

Price range: $270.27 through $1,131.13

Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
View Cart

Details

Mandals Dragman Drag Hose 4.5″, 5″, 5.5″, 6″, 7″, 7.25″ and 8″ – Lengths 660′
These products are Currently Out of Stock!
CALL 517.458.9741

FOR NEW AND IMPROVED OPTIONS!

Ask for Cedric

Special Pricing on Mandal's 6" 660' DRX Drag Hose when you buy 3 or more. Call for details 517-458-9741
Mandals Dragman Drag Hose (also known as Sludge Injection Drag Hose) is manufactured for umbilical drag systems. They are used for distribution of slurry and manure in agricultural fields. Drag Hoses are connected between slurry reservoirs (lagoons) and tow tractors. Mandals Dragman Drag Hose is the preferred dragline hose we offer because they offer the highest abrasion resistance and tensile strength and they offer environmentally friendly and safe manure distribution. A premium product offering both durability and wear resistance, they will save you time and money over the long haul. FEATURES

Designed for umbilical drag system used for distribution of slurry and manure in agricultural fields.

Engineered with extreme tensile strength and abrasion properties. High tenacity filament polyester yarn .

DESIGN

Covered and lined with Thermoplastic Polyurethane (TPU).

Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave.

Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure.

ADVANTAGES

Ultimate tensile strength and adhesion level polymer to weave.

Enhanced abrasion resistance.

High diameter and extension stability.

Low kink radius.

High puncture resistance.

Temperature range -50ºC to +75ºC (pure water) (-58 ºF to +167 ºF).

Standard lengths depending on diameter.

Excellent UV and weathering resistance.

Dragman EXTRA is especially designed to withstand the extreme tensilestress, pulling forces and abrasion from umbilical slurry systems. Mandals Drag hose4.5", 5", 5.5", 6", 7", 7.25" and 8"Drag line - Lengths 660', and 990', 1320' (depending on size)
Manufacturer: Fenner Mandals

CALL 517.458.9741 FOR TODAY’S SALE PRICE

Ask for Cedric or simply fill out the form below!

Name
First Last
Phone
Email

Item You Would Like a Quote On
View Cart

Details

Mandals Superman High Volume Transfer (HVT) Hose
CALL 517.458.9741

FOR TODAY'S PRICE

Ask for Cedric Available in 8", 10", 12" Diameter in lengths of 660' Mandals Superman High Volume Transfer (HVT) is our market-leading all-purpose hose for fluid transfer. Not only is Superman HVT designed for higher working pressures when transporting fluids, the hose is also heavily reinforced with exceptional resistance to abrasion and cutting. This is a hose you can rely on for a lifetime.
Mandals Superman HVT has full-diameter recovery after pressure release and is resistant to a wide range of chemicals. To prove that this hose can operate in the most demanding situations, it was developed with excellent hydrolysis and fungus resistance, along with great resistance to weather, UV, and Ozone. Superman HVT is leakproof and tested in sections up to 200m. Mandals Superman HVT is designed with premium thermoplastic polyether-based polyurethane (TPU) and is extruded with our state-of-the-art “through the weave” extrusion technology. The heavily reinforced and stabilized weave combined with great abrasion and puncture resistance makes for a hose you can rely on.

Lengths and Diameters

We offer a range of diameters and lengths for this hose, depending on the version. The diameters range from 127mm (5") to 305mm (12"), and for some diameters, the hose can be delivered in lengths up to 200m.* *Longer lengths are available on special request for certain diameters.

Operating Temperature

The hose has been developed to perform in different weather and environments, with an operating temperature from -50°C to + 75 °C ( -58°F to +167°F) for pure water.

Color Options - Black (standard)

ADVANTAGES

High Diameter and Dimension Stability

Great Adhesion and Tensile Strength

Minimal Snaking of Pressurized Hose

Long Lifetime and Low Maintenance

Easy to Deploy and Store

High Abrasion and Kink Resistance

High Puncture Resistance

High Quality Materials

Product Specifications
Primary Uses and Applications

Fracking

Long-distance water transfer

Mining

Emergency water removal during floods

Industrial plants

Refineries

Tank farms

Tank to ship vessels and vice versa

Supply hose for large agricultural systems

Heavy-duty firefighting systems such as fire monitors

Mandals Superman HVT Hose

Manufacturer: Fenner Mandals

Don't forget to ask about Cornell Pumps. Cornell Pumps are widely used in the oil and gas industry, hydraulic fracturing, due to their exceptional uptime, dependability, and efficiency

CALL 517.458.9741 FOR TODAY’S SALE PRICE

Ask for Cedric or simply fill out the form below!

Name
First Last
Phone
Email

Item You Would Like a Quote On
View Cart

Details

Metal 360 Victaulic Layflat Coupler
CALL 517.458.9741

FOR TODAY'S PRICE

Ask for Cedric

Victaulic Layflat Couplers are specialized fittings designed to connect layflat hoses, which are flexible hoses commonly used in applications like firefighting, irrigation, and industrial pumping.

Available in 8", 10" and 12"

Product Specifications
Part # - M3FRV12 12” Victaulic Lay-flat Hose Coupler

300 psi (tested pressure 900 psi)

A356.2 aluminum barb

A356.2 aluminum segment set

Bolts, 3/8”-16 X 2” stainless

Anodizing, MIL-A-8625 Type III Class 1 (optional)

Victaulic clamp (not included in assembly)

14” outside diameter with TPU hose installed

Note: Hose holding strength is subject to type of hose and hose wall thickness. Make sure segment bolts are sufficiently tightened to hold hose on barb. Part # - M3FRV10SSA 10” Victaulic Layflat Hose Coupler Produced Water Application

rated 300 psi (tested pressure 900 psi)

316 stainless steel barb

A356.2 aluminum segment set

Bolts, 3/8”-16 X 2” stainless

Anodizing, MIL-A-8625 Type III Class 1

Victaulic clamp (not included in assembly)

Note: Hose holding strength is subject to type of hose and hose wall thickness. Make sure segment bolts are sufficiently tightened to hold hose on barb.
Manufacturer: Metal 360

Don't forget to ask about Cornell Pumps. Cornell Pumps are widely used in the oil and gas industry, hydraulic fracturing, due to their exceptional uptime, dependability, and efficiency

.

CALL 517.458.9741 FOR TODAY’S SALE PRICE

Ask for Cedric or simply fill out the form below!

Name
First Last
Phone
Email

Item You Would Like a Quote On
View Cart

Details

Mandals Mainline Hose 6″, 8″ and 10″ – Lengths 660′
These products are In Stock!
CALL 517.458.9741

FOR TODAY'S SALE PRICE

Ask for Cedric You may want to read the article "10 Tips For Selecting Mainline Hose for Manure Distribution". A great guide for buying Mainline Hose and then you will know why we recommend Mandal's Mainline Hose to our customers.
Mandals is the preferred mainline hose that Triple K Irrigation offers for sale. We believe that Mandals hose offers the best value for the money when indexed across variables like durability and wear resistance. This means that Mandals hoses last longer in the field with fewer repairs or replacements. Mandals hose allows for rapid deployment and retrieval saving you time and effort. They also offer excellent flow rates and are resistant to most industrial and agricultural chemical, ozone and UV-rays. In short, when your business requires the very best, we believe that Mandals is the best option for mainline hose. FEATURES

Transfer at higher than normal working pressures

Lightweight and easy to deploy

Ultimate abrasion and puncture resistance

High diameter and extension stability

Minimum snaking of pressurized hose

DESIGN

Thermoplastic polyether based polyurethane (TPU)

State of the art “through the weave” extrusion technology

Heavily reinforced and stabilized weave, using high tenacity polyester filament yarns

Excellent adhesion between cover/lining and the weave

ADVANTAGES

Full diameter recovery after pressure release

Excellent hydrolysis and fungus resistance

Resistance to a wide range of chemicals

Temperature range -50 to 75 ºC (pure water)

Excellent UV, Ozone and weathering resistance

Leak proof tested section lengths up to 200 mts.

Designed for long life and maintenance-free service in the harshest environments. This market leading hose is tough and durable with exceptional resistance to abrasion and cutting Mandals Mainline hose 6", 8" and 10" - Lengths 660'
Manufacturer: Fenner Mandals

CALL 517.458.9741 FOR TODAY'S SALE PRICE

Ask for Cedric or simply fill out the form below!

Name
First Last
Phone
Email

Item You Would Like a Quote On

Sale!

Sure-Flo Foot Valve Vertical FPT, Foot Valve, Vertical Foot Valve

View Cart

Select options / Details

Foot Valve Vertical Female Thread

This Vertical Female Thread Foot Valve is made out of lightweight and durable aluminum. This SURE-FLO aluminum foot valve is for use on hose, pipe or plastic pipe. The durable rubber flapper seats on a machined aluminum surface and provides a tight seal which minimizes leakage. Unlike the old fashioned leather flapper it does not dry out or shrink when out of service. Ample space is provided for the flapper to fold back out of the liquid stream thus keeping friction loss to a minimum. The hump on the body must face up when it is used in a horizontal or near horizontal position. Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.

Head Pressure for Foot Valve

Vertical Threaded Female NPT Foot Valve
Pt #	H	W	lbs	Screen Ht.	Screen Dia.	Open Area	Seat Bolts Req'd	Screen Bolts Req'd	Screen Bolt Dim.	Flange Bolts
SFVV2-FP	7-1/4	5-3/4	4	2-5/8	5	16	3	(3)	1/4 x 4	0
SFVV3-FP	10-1/2	7	5-1/2	4-1/2	6	34	4	(3)	1/4 x 6	0
SFVV4-FP	15	7-3/4	10	6-1/2	7-1/4	61	5	(3)	1/4 x 8	0
SFVV5-FP	17-1/2	9-1/2	16	7-3/8	8-3/8	78	7	(3)	1/4 x 9	0
SFVV6-FP	19-1/2	11	19	8-3/8	9-1/4	97	8	(3)	1/4 x 10	0
SFVV8-FP	28	14-1/2	33	13-1/2	11-1/4	190	11	(3)	1/4 x 15-3/8	0
SFVV10-FP	36-1/2	17	51	21	13-5/8	359	12	(4)	1/4 x 22-7/8	0

*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!*

Brand Name: Sure Flo Fittings

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Valve Flapper Gasket Assembly

Price range: $25.89 through $114.66

Replacement Valve Flapper Gasket Assembly for your Foot Valve. Made of heavy-duty and durable steel. Includes gasket, weight, cover and bolt. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand: Sure-Flo Fittings
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Valve Flapper Gasket

Price range: $13.88 through $69.62
Replacement Valve Flapper gasket for your Foot Valve. Made of lightweight and durable rubber. Gasket Only - Weights not included. A Valve Flapper Gasket is a component commonly found in irrigation systems, particularly in check valves or flapper valves. Its primary role is to create a seal within the valve, ensuring that water flows in the correct direction and preventing backflow.
Key Features of a Valve Flapper Gasket:

Material: Usually made of rubber, silicone, or other flexible and durable materials resistant to water, chemicals, and pressure.

Shape: It often conforms to the valve's internal design, ensuring a tight fit to minimize leaks.

Location: Positioned between the flapper (a hinged or flexible part that allows water flow) and the valve body.

How It Works:

When water flows in the intended direction, the flapper lifts, allowing passage.

The gasket ensures a watertight seal when the flapper closes, preventing water from reversing direction.

Benefits:

Prevents Backflow: Essential for maintaining water quality and avoiding contamination.

Improves Efficiency: Reduces water loss by minimizing leaks.

Extends Valve Life: By providing a reliable seal, it reduces wear and tear on other valve components.

Applications in Irrigation:
Valve flapper gaskets are crucial in systems like:

Mainline check valves to prevent backflow into water sources.

Pump discharge systems where reverse flow could damage equipment.

Any irrigation setup that requires controlled water direction.

Maintenance Tips:

Regular Inspections: Check for cracks, wear, or deformation.

Replacement: Replace the gasket when it shows signs of aging to maintain system efficiency.

Proper Installation: Ensure correct placement during assembly to avoid leaks.

* Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Valve Bottom Disk for Foot Valve

Price range: $21.16 through $72.57

This is a valve bottom disk for a foot valve. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Flange Casting For Foot Valve

Price range: $13.42 through $56.10

This is a replacement flange for a foot valve. Made out of lightweight & durable aluminum. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings

Sale!

Foot Valve Screen, Screen for Foot Valve, Sure Flo

View Cart

Select options / Details

Screen Only for Foot Valve

This is for an aluminum screen for a foot valve. Screen Only! Foot Valve Screen Dimensions

Screen Dimensions	Height	Diameter
2" Basic Valves	2-5/8"	5"
3" Basic Valves	4-1/2"	6"
4" Basic Valves	6-1/2"	7-1/4"
5" Basic Valves	7-3/8"	8-3/8"
6" Basic Valves	8-3/8"	9-1/4"
8 Basic Valves	13-1/2"	11-1/4"
10" Basic Valves	21"	13-5/8"
12" Basic Valves	36"	22"

*Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings

Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Foot Valve Screen Bolt & Nut

Price range: $2.09 through $8.96

This is for the screen bolt and nut for a foot valve. You will need to know the size of your foot valve before you can order this. **These are ordered by the size of the foot valve and not the length of the bolt** Questions? Call us at 517-458-9741 or email us at info@triplekirrigation.com. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Valve Seat Ring for Foot Valve

Price range: $29.03 through $75.85
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Valve Seat Ring with Conversion Tube for Foot Valve

Price range: $90.09 through $159.25
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Sponge Clean Out Ball – Soft Density

Price range: $32.00 through $393.94

Available in the following sizes: 4" = 120 mm 7" = 175 mm 8 5/8" = 220 mm 9 7/8" = 250 mm 10 5/8" = 270 mm 12" = 305 mm 14" = 355 mm 15" = 381 mm Click on the Size / Choose an Option to see pricing details. Please note all the clean out balls are yellow except for the 15". The 15" are orange.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Hard Mender

Price range: $139.77 through $176.38

Hard Mender for Soft Hose Travelers
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Liquid Filled Pressure Gauge

Price range: $15.03 through $18.90

Liquid Glycerin Filled Pressure Gauge Grade A accuracy of 1.6% full range 2.5-inch (63.5mm) diameter ABS case with 372 plastic window 1/4-inch NPT bottom connection; brass internals and connection Dampening action of the liquid makes readings possible during conditions of rapid dynamic loading and vibration Better performance in corrosive environments and immunity to moisture penetration and icing Liquid helps to lubricate all moving elements, improving the lifespan of the gauge High visibility dial face and numbers
Sale!

View Cart

Add to cart / Details

3″x4″ Automatic Discharge Priming Valve – Berkeley

Original price was: $1,506.00.Current price is: $1,054.20.

Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 3″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. This Automatic Discharge Priming Valve by Berkeley allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you. Brand Name: Berkeley
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Clack Rebuild Kit for Automatic Discharge Priming Valve – Berkeley

Price range: $329.00 through $580.34

Clack Rebuild Kit for Automatic Discharge Priming Valve - Berkeley Berkeley Automatic Discharge Priming Valve allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. Please see the parts breakdown below to identify what is included in this rebuild kit. Brand Name: Berkeley
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Spring for Automatic Discharge Priming Valve – Berkeley

Price range: $28.00 through $30.10

Spring for Automatic Discharge Priming Valve - Berkeley Berkeley Automatic Discharge Priming Valve allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. Please see the parts breakdown of items available for purchase. Brand Name: Berkeley
Sale!

View Cart

Add to cart / Details

4″x4″ Automatic Discharge Priming Valve – Flanged – Berkeley

Original price was: $2,046.00.Current price is: $1,432.20.

Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 4″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you. Brand Name: Berkeley
Sale!

View Cart

Add to cart / Details

5″x5″ Automatic Discharge Priming Valve – Flanged – Berkeley

Original price was: $3,529.00.Current price is: $2,470.30.

Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 5″x5″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you. Brand Name: Berkeley
Sale!

View Cart

Add to cart / Details

6″x6″ Automatic Discharge Priming Valve – Flanged – Berkeley

Original price was: $3,377.00.Current price is: $2,363.90.

Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 6″x6″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you. Brand Name: Berkeley
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

MZ Brass Slide Valve (NPT x NPT)

Price range: $334.08 through $414.27

Do you need to control the flow of water to different sections of your operation? Brass slide valves, also known as brass gate valves, are commonly used in irrigation systems to control the flow of water. These valves are made of brass, a durable and corrosion-resistant material that is well-suited for outdoor and irrigation applications. Brass slide valves consist of a brass body with an internal sliding gate mechanism. The gate is typically controlled by a handle or wheel that moves the gate up or down within the valve body to open or close the flow passage. When the gate is in the fully open position, water can flow freely through the valve, allowing irrigation. Conversely, when the gate is fully closed, it blocks the flow of water, effectively stopping irrigation to a particular section of the system. One advantage of brass slide valves is their ability to provide a tight seal when closed, minimizing leakage. This is especially important in irrigation systems where water conservation is a priority. Brass is also resistant to corrosion, making these valves suitable for outdoor use and exposure to various weather conditions. Also known as a 4-Bolt Flange Brass Piston Valve. This valve can have a Double Acting Air Cylinder or Double Acting Hydraulic Cylinder added to it. 60 PSI Rating
View Cart

Add to cart / Details

6″ MZ Brass Lever Valve (Flange x FNPT)

$612.05

Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee our valves are of the highest quality. This 6" MZ Brass Lever Valve has a four bolt flange on one side and female NPT on the other side. Also known as a MZ Stem Gate Valve.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

MZ Brass Lever Valve (NPT x NPT)

Price range: $288.08 through $527.95

Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica Zanolo (MZ) has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee their valves are of the highest quality. This valve is a MZ Brass Lever Valve (NPT x NPT) available in 4" and 6" sizes.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

MZ Brass Slide Valve (4-Bolt Flange x 4-Bolt Flange)

Price range: $333.75 through $788.92

Do you need to control the flow of water to different sections of your operation? Brass slide valves, also known as brass gate valves, are commonly used in irrigation systems to control the flow of water. These valves are made of brass, a durable and corrosion-resistant material that is well-suited for outdoor and irrigation applications. Brass slide valves consist of a brass body with an internal sliding gate mechanism. The gate is typically controlled by a handle or wheel that moves the gate up or down within the valve body to open or close the flow passage. When the gate is in the fully open position, water can flow freely through the valve, allowing irrigation. Conversely, when the gate is fully closed, it blocks the flow of water, effectively stopping irrigation to a particular section of the system. One advantage of brass slide valves is their ability to provide a tight seal when closed, minimizing leakage. This is especially important in irrigation systems where water conservation is a priority. Brass is also resistant to corrosion, making these valves suitable for outdoor use and exposure to various weather conditions. This is also known as a 4-Bolt Flange Brass Piston Valve. This valve can have a Double Acting Air Cylinder added to it. 45 PSI Rating
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

4-Bolt Steel Flange for MZ Brass Slide Valve

Price range: $15.66 through $37.42

This 4-Bolt Steel Flange for MZ Brass Slide Valve is an accessory for 4", 6", or 8" MZ Brass Slide Valve.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Gasket for MZ Valve

Price range: $25.85 through $66.30

This Gasket for MZ Valve is an accessory for 6" or 8" MZ Valve. It is a 4-bolt rubber gasket.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Double Acting Air Cylinder for MZ Brass Slide Valve

Price range: $645.21 through $754.45

This Double Acting Air Cylinder is an accessory for 4", 6" or 8" MZ Brass Slide Valve.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Hydraulic Cylinder for MZ Brass Slide Valve (Double Acting)

Price range: $526.33 through $593.12

This Hydraulic Cylinder for MZ Brass Slide Valve (Double Acting) is an accessory for the 4", 6" or 8" MZ Brass Slide Valves.
View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Manual Locking Handle for MZ Slide Valve

Price range: $29.50 through $34.50

These Manual Locking Handles for MZ Slide Valves are a neccessary. These are available for 4", 6" and 8" MZ Slide Valves.
Sale!

View Cart

Select options This product has multiple variants. The options may be chosen on the product page / Details

Ironsides PVC Layflat Discharge Hose

Price range: $69.90 through $2,547.00
Do you need to move or remove water? Ironsides PVC Layflat Discharge Hose is the product for you. Available in sizes from 1 1/2 inches to 8 inches and in lengths up to 300 feet.
Ironsides PVC Layflat Discharge Hose

A heavy duty PVC water discharge hose featuring a premium quality PVC tube and cover.

Hose is reinforced with two spiral plies and longitudinal synthetic cords.

MSHA-accepted (Acceptance Marking No. MSHA IC-218/2) for use as a water hose in underground mining applications

Not intended for use as a fire hose.

Here at IrrigationSupplyParts.com, we stock larger sizes (6" and 8") and shorter or longer lengths of hoses. Due to freight variances, we prefer to have our customers call for pricing to allow us to quote proper freight charges on any hoses other than what is offered on this site.
Brand Name: Kuriyama