Irritec 
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Tee fitting to be used with 5/8" Drip Tape. A tee can be used to branch off an additional line from the mainline or for an individual row. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Previous SKU: G-00152 Brand Names: Jain Irritec
-
Sale!
Very easy to install tubing over single barb
Positive stop to assure tubing is fully installed
Low effort, square thread drive ring quickly locks tubing in place — no tools needed
Barb design ensures tubing will not slip out or blow off at high pressure and temperature
Each fitting will accommodate a wide range of hose diameter and wall thickness
Working pressure: 60 psi
To connect Total CV and polyethylene supply tubing
Fits a wide range of tubing ID and wall thicknesses (see chart below)
Brand Names: JainFitting Series # Acceptable I.D. (Inches) Acceptable I.D.(Millimeters) Acceptable Wall Thickness (Inches) Acceptable Wall Thickness (Millimeters) 55 0.520 to 0.620 13.2 to 15.7 0.045 to 0.055 1.14 to 1.40 70 0.665 to 0.765 16.9 to 19.4 0.035 to 0.055 0.89 to 1.40 80 0.790 to 0.845 20.1 to 21.5 0.045 to 0.065 1.14 to 1.65 100 1.035 to 1.075 26.3 to 27.3 0.062 to 0.075 1.57 to 1.91
Irritec
-
Sale!
Very easy to install tubing over single barb
Positive stop to assure tubing is fully installed
Low effort, square thread drive ring quickly locks tubing in place — no tools needed
Barb design ensures tubing will not slip out or blow off at high pressure and temperature
Each fitting will accommodate a wide range of hose diameter and wall thickness
Working pressure: 60 psi
To connect Total CV and polyethylene supply tubing
Fits a wide range of tubing ID and wall thicknesses (see chart below)
Brand Names: JainFitting Series # Acceptable I.D. (Inches) Acceptable I.D.(Millimeters) Acceptable Wall Thickness (Inches) Acceptable Wall Thickness (Millimeters) 55 0.520 to 0.620 13.2 to 15.7 0.045 to 0.055 1.14 to 1.40 70 0.665 to 0.765 16.9 to 19.4 0.035 to 0.055 0.89 to 1.40 80 0.790 to 0.845 20.1 to 21.5 0.045 to 0.065 1.14 to 1.65 100 1.035 to 1.075 26.3 to 27.3 0.062 to 0.075 1.57 to 1.91
Irritec -
Sale!The Power-Loc Coupling is an essential component for drip and micro-irrigation systems, providing a quick, reliable, and reusable solution for connecting and extending irrigation tubing. Its ease of use and durability make it a trusted choice for efficient water management.
Very easy to install tubing over single barb
Positive stop to assure tubing is fully installed
Low effort, square thread drive ring quickly locks tubing in place — no tools needed
Barb design ensures tubing will not slip out or blow off at high pressure and temperature
Working pressure: 60 psi
To connect Total CV and polyethylene supply tubing
Fits a wide range of tubing ID and wall thicknesses (see chart below)
Brand Names: JainFitting Series # Acceptable I.D. (Inches) Acceptable I.D.(Millimeters) Acceptable Wall Thickness (Inches) Acceptable Wall Thickness (Millimeters) 55 0.520 to 0.620 13.2 to 15.7 0.045 to 0.055 1.14 to 1.40 70 0.665 to 0.765 16.9 to 19.4 0.035 to 0.055 0.89 to 1.40 80 0.790 to 0.845 20.1 to 21.5 0.045 to 0.065 1.14 to 1.65 100 1.035 to 1.075 26.3 to 27.3 0.062 to 0.075 1.57 to 1.91
Irritec
[/fusion_text][/fusion_builder_column][/fusion_builder_row][/fusion_builder_container] -
Sale!Figure Eight End Closure for tubing. This fitting is the most common way to end a supply line. As you can see by the diagram below, it is very simple to end a hose with this Figure Eight End Closure. Just slip the figure eight end closure over the end of the line. While bending the tubing over, slide the figure eight back over the remaining hose for a leak proof fit. Installation Instructions:Brand Name: Jain
-
Sale!
A Power-Loc x 3/4" MPT Adapter is a specialized fitting used in irrigation systems to connect polyethylene (poly) tubing to components with male pipe threads (MPT). The "Power-Loc" designation refers to a type of compression fitting known for its secure and leak-resistant connections, while "3/4" MPT" indicates a 3/4-inch male pipe thread.
Features:
-
Secure Connection: The Power-Loc design ensures a tight seal, reducing the risk of leaks in the irrigation system.
-
Durable Construction: Typically made from robust materials, these adapters are built to withstand the demands of agricultural environments.
-
Ease of Use: The compression mechanism allows for straightforward installation without the need for specialized tools.
Benefits:
-
Reliability: Provides a dependable connection between poly tubing and threaded components, essential for maintaining consistent water flow.
-
Versatility: Suitable for various irrigation applications, accommodating different system configurations.
Pros:
-
Easy to install and remove.
-
Offers a secure and leak-proof connection.
-
Compatible with standard 3/4" MPT components.
Cons:
-
May be more expensive than basic fittings.
-
Requires compatibility between tubing size and adapter specifications.
In summary, the Power-Loc x 3/4" MPT Adapter is a valuable component in irrigation setups, offering a reliable and user-friendly solution for connecting poly tubing to threaded parts.
-
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Elbow fitting to be used with 5/8" Drip Tape. Elbows allow you to make a sharp turn which the drip tape itself is not capable of making. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Previous SKU: G-00153 Brand Names: Jain Irritec
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Brand Name: Jain
-
Out of stockDrip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 7,500 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .5 GPM/100’. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Extra Discounts available for Pallet Quantities. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! Brand Name: Jain
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Drip Irrigation Blank Tape Spool This spool has a 24" Diameter and 17" Height (Black end to Black End); the inside spool has a 5" Diameter and 15" Height (White end to White end). Drip Irrigation Blank Tape Spool has been designed to roll your longs runs of drip tape back onto at the end of the season for easy storage and future usage. The following season your drip tape will be ready for re-installation. Some assembly required. In stock and ready to UPS same day! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Sale!Product Features
- 12" spacing
- Uses standard Power Loc 55 fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .5"
- Operating pressure range: 7 - 60 PSI
- Wall thickness: .040"
- Filtration requirements: 120 mesh
- Emitter flow rate: 1 GPH (nominal at 10 PSI)
- Coil length: 100'
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
Want to see more Drip irrigation ideas? Visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!A 1/4" emitterline designed for smaller plant and tree rings, Mini-Pepline distributes water through a tube emitter at 6" spacing with .5 GPH flow. Mini-Pepline also works in tandem with multi-port drip manifolds like the Octa-Bubbler, QB2 and Quadra Bubbler. The small footprint of Mini-Pepline allows the tubing to be hidden easily making it a great option for potted plants and small bushes with groundcover. Product Features
- 6" spacing (12" available by special order)
- Uses standard 1/4" barbed fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- Hydrodynamic emitter design ensures continuous flushing of sediments and small particles
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .250" OD x .170" ID - 1/4"
- Operating pressure range: 10 - 50 PSI
- Wall thickness: .040"
- Filtration requirements: 150 mesh
- Emitter flow rate: .5 GPH (nominal at 10 PSI)
- Coil length: 500'
-
Sale!A 1/4" emitterline designed for smaller plant and tree rings, Mini-Pepline distributes water through a tube emitter at 6" spacing with .5 GPH flow. Mini-Pepline also works in tandem with multi-port drip manifolds like the Octa-Bubbler, QB2 and Quadra Bubbler. The small footprint of Mini-Pepline allows the tubing to be hidden easily making it a great option for potted plants and small bushes with groundcover. Product Features
- 6" spacing (12" available by special order)
- Uses standard 1/4" barbed fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- Hydrodynamic emitter design ensures continuous flushing of sediments and small particles
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .250" OD x .170" ID - 1/4"
- Operating pressure range: 10 - 50 PSI
- Wall thickness: .040"
- Filtration requirements: 150 mesh
- Emitter flow rate: .5 GPH (nominal at 10 PSI)
- Coil length: 100' (500' and 1000' available by special order)
-
This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .5 GPM/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: G-00170 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
This 15 mil Drip Tape was designed to be used as a supply line to bring water to the tape-loc fittings which attach to the drip tape. As indicated in the name of this part #, this drip tape is 50 feet in length. It measures 5/8″ ID (inside diameter) and is 15 mil in thickness. Ideal for use in raised beds and gardens. Brand Name: Jain
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Sale!
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
-
Sale!U shaped wire hold downs are great for securing our 5/8" distribution tubing, 5/8" drip tubing, 1/2" supply tubing or 1/2" dripper line in place. They are simple to use and work well in heavy soils. Each U shaped wire hold down "staple style" is 6" long.
- 100 Pack of U Shaped Wire Hold Downs
- Holds up to .940 O.D.
- Made of 12 Gauge U.S. Steel Wire
- 6" Long
- .116" Diameter
-
This is a cast aluminum weld on hose barb for your irrigation system. Whether you need to update your existing system, or bring new parts into your system we have what you need! *Be sure to check out our full line of hose barbs and fabrication fittings!* Brand Name: Travis
-
This is a steel weld on hose barb for your irrigation system. Whether you need to update your existing system, or bring new parts into your system we have what you need! *Be sure to check out our full line of hose barbs and steel fabrication fittings!* Brand Name: Pierce
-
Sale!These steel plated Hose Menders are used to fix or repair your damaged hoses. Corrosion resistant to withstand the harshest of materials. *Be sure to check out our full line of hose menders and repair couplings.* Brand Name: Kuriyama
-
A PE Tube Mender is a small, durable fitting used in irrigation systems to repair or join sections of polyethylene (PE) tubing, commonly used in drip and micro-irrigation setups. This fitting restores functionality to damaged tubing, saving time and costs associated with replacing the entire line.
Features:
- Durable Construction: Made from corrosion-resistant plastic or metal, designed to withstand outdoor conditions and frequent water flow.
- Quick Repair: Allows easy insertion into the ends of damaged PE tubing, creating a secure, leak-proof connection.
- Versatile Sizes: Available in different diameters to match standard PE tubing sizes.
- Reusable Design: Can be easily installed and removed for adjustments or further repairs.
Benefits:
- Cost-Effective: Repairs damaged tubing without the need for full-line replacements.
- Ease of Use: Simple to install, requiring no special tools or skills.
- Leak Prevention: Restores the system's integrity, ensuring efficient water delivery without waste.
- System Longevity: Extends the lifespan of irrigation tubing by allowing quick fixes in the field.
-
All thermoplastic repair couplings are constructed from white or gray Polyvinyl Chloride (PVC) Type I compound having a cell classification of 12454 conforming to ASTM D1784. All repair couplings are furnished with double O-ring seals in EPDM or FKM elastomer material. Internal Pressure: ½ - 3 inch - 235psi @ 73° F 2-1/2 – 4 inch - 200psi @ 73° F 6 inch 150psi @ 73° F Brand Name: Matco Norca
-
Flexible Rubber Coupling with Stainless Steel Bands Durable rubber for all Schedule 40 pipe applications. Fernco Style. Brand Name: Matco Norca
-
Designed for Quick Connections, System Modifications or Repairs Completely Redesigned for Improved Versatility Easy-Thread Compression Nut New Spigot Conversion Capability Full Service 150 PSI Pressure Rating Brand Name: Spears
-
Sale!General Information: With their Screen and Disc elements Amiad TAGLINE filters are made for wide range of irrigation applications. The TAGLINE filters are available in various filtration degrees to cover the needs of modern irrigation systems. TAGLINE filters are made from high quality engineered plastic materials providing excellent mechanical strength, durability and ease of installation. Amiad’s TAGLINE filters are easy to maintain; no tools are needed for extracting the filter element from the filter housing for rinsing. Filter Elements: Covering a wide range of flowrates, various filtration degrees and a variety of irrigation applications, Amiad supplies two types of filter elements for its TAGLINE series: Screen Elements and Disc Elements (discs are by special order only).
- Easy maintenance and minimal manual cleaning required
- Algae growth prevention & corrosion resistance
- High-quality mechanical strength and corrosion resistance
- Low pressure loss
- Interchangeable filter elements for a wide range of flow rates, filtration degrees and irrigation applications
- Additional sizes available upon request
-
Sale!Special Pricing - 55% Off Retail While Supplies Last!!! Plastic Spin Clean Y-Filter
- No moving parts
- Unique Spin Clean® action keeps the screen clean during operation
- Engineered plastic construction is light in weight and resistant to corrosion and injected chemicals
- Two piece threaded housing with O-ring seal for easy screen access and maintenance
- Vinyl screen collars prevent debris from by-passing filter area
- Available with ball valve for flushing debris basin
- Only 5-8 psi pressure loss required across filter to ensure best self cleaning action
-
Sale!
Filtration is the first line of defense in the irrigation chain, protecting your system and ensuring high production quality and profitable yields.
How the Mini Sigma Filter Works General Amiad’s Mini Sigma filter is the newest addition to the Sigma family. It is a small and lightweight yet durable filter; quick and easy to install, simple to operate, and requires minimal maintenance. The Mini Sigma filter was developed to handle low pressure operation, with a capacity of up to 80 m3/h (352 gpm) and with filtration degrees from 80-500 micron. Inlet/outlet connections are available in 50mm (2”), 80 mm (3”), and 100mm (4”) diameter. Filters include a 40mm (1.5”) flush valve. The Filtration Process Raw water enters through the filter inlet and passes through the screen. Clean water flows through the filter outlet. The gradual dirt buildup on the screen’s inner surface causes a filter cake to develop, creating an increase in the pressure differential across the filter system. A differential pressure (DP) switch senses the pressure differential and when it reaches a pre-set level, the self-cleaning process begins. The Control System - Amiad’s NEW ADI-P Controller Amiad’s ADI-P controller offers a one-of-a-kind monitoring and control functionality. The controller interacts with Amiad’s advanced, user-friendly app that provides detailed filtration performance data on your mobile phone device. The self-cleaning mechanism is controlled and monitored by the ADI-P controller. The self-cleaning cycle is triggered by an integrated DP switch. The ADI-P controller and mobile app also provide: • DP and flush cycle counters • Alerts – low/high pressures, low battery • Reports and performance history data The Self-Cleaning Process The self-cleaning cycle is initiated by any one of the following conditions: 1. Signal from the DP switch, pre-set at 7 psi (0.5 bar) 2. Time interval parameter set at the controller 3. Manual start, triggered by the ADI-P mobile app (within Bluetooth range) or via electronic controller keypad The flush valve opens to atmosphere creating a strong suction force at the scanner nozzles, effectively removing dirt particles from the screen and discharging them from the filter. Mini Sigma Models Amiad’s Mini Sigma Series consists of the following models: • 2” Mini Sigma for up to 25 m3/h (110 gpm) • 3” Mini Sigma for up to 50 m3/h (220 gpm) • 4” Mini Sigma for up to 80 m3/h (352 gpm) Valves Needed for Mini Sigma Models • 2” Mini Sigma requires a valve on the downstream side - Required - 77-514T08 (2" Gate Valve) • 3” Mini Sigma requires a valve on the downstream side - Required - 77-B6-RL03 (3" Butterfly Valve) • 4” Mini Sigma requires a valve on the downstream side - Required - 77-B6-RL04 (4" Butterfly Valve) *If you already have a valve you do not need to purchase an additional one*- Reliable and durable
- Amiad’s unique suction-scanner cleaning technology
- Modular design with various installation configurations
- Polymeric filter – corrosion free
- Low water and energy consumption
- Compact design and small footprint
- Easy installation and low maintenance
- Ideal for many landscape and agricultural irrigation applications
- Amiad’s innovative and user-friendly ADI-P electronic controller, operated by a mobile app for advanced monitoring capabilities
- 130 MICRON RATING IN STOCK
- Additional sizes and configurations available upon request
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!A 2″ Filter Plastic with Flush Valve is an irrigation component designed to filter out debris and particulate matter from the water supply before it enters the irrigation system. The 2-inch specification refers to the diameter of the inlet and outlet connections, making it suitable for moderate to large-scale irrigation setups. This type of filter is typically made from durable plastic, which provides resistance to corrosion and ensures long-term performance in outdoor conditions. The flush valve feature allows for easy cleaning and maintenance of the filter by enabling users to flush out accumulated debris without disassembling the entire unit. This helps maintain optimal water flow and prevents clogs or damage to downstream equipment like drip lines, sprinklers, or emitters. In farming and gardening, using a filter with a flush valve is essential for protecting the irrigation system, ensuring consistent water delivery, and extending the lifespan of the system components.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
