-
These bullets may be used for cleaning cement pumping systems, waste handling systems, oil drilling/pumping systems and other various types of cleaning processes for piping or tubing. Available in the following sizes: 230mm - 270 mm (9" to 10 1/2") - Recommended for 8" Hose 290 mm - 330 mm (11" to 13") - Recommended for 10" Hose Click on the Size / Choose an Option to see pricing details.
-
Sale!VOE Stem Yoke (Clutch) 8" Item 10 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!VOE Stem Yoke (Clutch) 3" to 6" Item 10 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring Bail 3" to 8" Item 9 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Bolt 1/4" by 3 1/2" Item 8 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring for 8" Item 7 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring for 6" Item 7 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring for 5" Item 7 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring for 4" Item 7 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Clamp Lock Ring for 3" Item 7 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
3/4" Lock Nut Item 6 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Chevron Rubber Gasket for 8" Item 4 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Chevron Rubber Gasket for 3" to 6" Item 4 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!1" Stem w/ Solid Yoke for 8" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!3/4" Stem w/ Solid Yoke for 5" to 6" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!3/4" Stem w/ Solid Yoke for 3" to 4" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Roll Pin (Handle) 8" Item 2 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Roll Pin (Handle) 3" to 6" Item 2 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Handle with Collar for 8″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Handle with Collar for 3″ to 6″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Galvanized steel 45-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
Galvanized steel 90-degree welding elbow. Made of high-quality galvanized steel. Be sure to check out our full line of galvanized fabrication fittings.Galvanized steel is regular steel sheets that have been coated in zinc to make them corrosion resistant.
-
Description
Note these sprinklers have a different thread pattern primarily used in the California market. This product's thread pattern differs from the traditional thread patterns across the rest of the United States. It is primarily used in California and comes from an acquisition by Wade Rain years ago. The pattern was so popular in the market that they continued supporting it for installers already invested in it.- Stainless steel spindle, fulcrum pi, arm and bearing spring
- UHMW-PE bearing seals for 7/64′, 1/8″,& 9/64″ nozzles
- Teflon bearing seals for 3/32″ nozzle
- 23-degree trajectory, single nozzle
- Available with RB 3/8″, 24 or WT 1/8″ – 27 thread nozzle
- Features:
- Bronze material is highly resistant to impact
- Strong design and heavy construction for long life
- Robust spring to assure consistent and long-lasting operation
- Smooth wetting pattern
- Good irrigation coverage and turn at low pressures
-
Sale!Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
Head Pressure for Foot Valve
-
Sale!
Watch our video: Foot Valves Explained
Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper. Head pressure comes from the vertical down pressure of the volume of water above the valve. The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.Head Pressure for Foot Valve
-
Sale!The Nelson SR100 Big Gun Lower Bearing Kit is a maintenance and replacement component designed for the Nelson SR100 Big Gun sprinkler. It contains the necessary parts to repair or replace the lower bearing assembly, which is critical for the smooth rotation and functionality of the sprinkler.
Features:
- Replacement Bearings: Ensures proper rotation and alignment of the sprinkler head.
- High-Quality Materials: Built to withstand wear, corrosion, and exposure to outdoor conditions.
- Complete Kit: Includes all necessary components for servicing the lower bearing.
- Precision Fit: Specifically designed for the SR100 Big Gun sprinkler, ensuring compatibility and performance.
Benefits:
- Restores Performance: Keeps the sprinkler rotating smoothly for consistent water distribution.
- Prolongs Equipment Life: Replacing worn bearings reduces stress on other components, extending the lifespan of the sprinkler.
- Cost-Effective: Avoids the need to replace the entire sprinkler by addressing a specific wear point.
- Easy Maintenance: Simplifies repairs, minimizing downtime in irrigation operations.
-
Sale!This is for a SR150 Big Gun – Lower Bearing Kit. Please click on link below to see more detailed information. https://nelsonirrigation.com/library/Big-Gun_12737-LOWER-BEARING-KIT-HD150.PDF Consist of: (2) 6253 - Bearing, Ball, 70mm x 110mm, One Seal (1) 8371 - Brake - HD150 (1) 8372 - Seal, Upper - HD150 (1) 8373 - Seal, Center - HD150 (1) 8460 - Gasket, Elbow - SR150 (2) 8461 - Gasket, Housing - HD150 (1) 8473 - Seal, Dust - HD150 (12) 8474 - Spring, Brake - HD150 (1) 8475-001 - O-Ring (1) 10068 - Retainer Assembly - HD150 (1) 12064 - O-Ring (1) 6143-001 - Grease, Lubriplate Low-Temp, 16 oz can
-
Sale!This is for a Nelson SR100 or SR150 Big Gun Drive Arm & Counterweight Service Kit. Please click on link below to see more detailed information. Nelson SR150 Complete Service Kit Nelson SR100 Complete Service Kit Consists of: (2) 6563 - O'Ring, -024 (2) 6565 - Ring, Retaining, -125 Basic Internal, SS (3) 6598 - Bearing, Ball, 12 x 32 x 10 mm OPEN (4) 6600 - Seal, Radial Lip, 1.260" x .625" x .250" (2) 6603 - Nut, .4375-20 Hex SPCL - F100/SR100/SR150 (2) 6607-001 - Spacer, Done, Teflon Coated (1) 8327-001 - Spacer, Drive Arm to CWT - SR100/SR150 (1) 9821 - Grease, Lubriplate 130-AA, 1.75 oz tub
-
Sale!The Nelson SR100 Big Gun – Complete Service Kit is a comprehensive maintenance and repair kit designed for the Nelson SR100 Big Gun sprinkler, a high-performance irrigation tool used in large-scale farming and industrial applications. This kit includes all the essential components required to maintain, repair, or rebuild the sprinkler to ensure optimal performance.
Key Components and Uses:
- Replacement Parts: Includes seals, O-rings, bearings, and other critical components prone to wear over time.
- Maintenance Tools: Provides tools or parts needed to disassemble, service, and reassemble the sprinkler.
- Ensures Efficiency: Regular maintenance using this kit helps maintain uniform water distribution and consistent performance.
- Extends Lifespan: By replacing worn or damaged parts, the kit prolongs the operational life of the SR100 Big Gun, reducing the need for costly replacements.
Applications:
- Large-Scale Irrigation: Keeps the SR100 functioning optimally for irrigating row crops, pastures, or orchards.
- Dust Suppression: Ensures reliable operation in industrial settings for dust control.
- Wastewater Management: Maintains performance in systems using recycled water.
-
Matco Valves Special Offer. FREE FREIGHT on orders of $3000 or more from November 1st, 2025 , through December 31st, 2025. Call Cedric at 517-458-9741 for details.
-
Matco Valves Special Offer. FREE FREIGHT on orders of $3000 or more from November 1st, 2025, through December 31st, 2025. Call Cedric at 517-458-9741 for details.
-
These products are Currently Out of Stock!CALL 517.458.9741FOR NEW AND IMPROVED OPTIONS!Ask for Cedric
Special Pricing on Mandal's 6" 660' DRX Drag Hose when you buy 3 or more. Call for details 517-458-9741
Mandals Dragman Drag Hose (also known as Sludge Injection Drag Hose) is manufactured for umbilical drag systems. They are used for distribution of slurry and manure in agricultural fields. Drag Hoses are connected between slurry reservoirs (lagoons) and tow tractors. Mandals Dragman Drag Hose is the preferred dragline hose we offer because they offer the highest abrasion resistance and tensile strength and they offer environmentally friendly and safe manure distribution. A premium product offering both durability and wear resistance, they will save you time and money over the long haul. FEATURES- Designed for umbilical drag system used for distribution of slurry and manure in agricultural fields.
- Engineered with extreme tensile strength and abrasion properties. High tenacity filament polyester yarn .
- Covered and lined with Thermoplastic Polyurethane (TPU).
- Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave.
- Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure.
- Ultimate tensile strength and adhesion level polymer to weave.
- Enhanced abrasion resistance.
- High diameter and extension stability.
- Low kink radius.
- High puncture resistance.
- Temperature range -50ºC to +75ºC (pure water) (-58 ºF to +167 ºF).
- Standard lengths depending on diameter.
- Excellent UV and weathering resistance.
Manufacturer: Fenner MandalsCALL 517.458.9741 FOR TODAY’S SALE PRICEAsk for Cedric or simply fill out the form below! -
These products are In Stock!CALL 517.458.9741FOR TODAY'S SALE PRICEAsk for Cedric You may want to read the article "10 Tips For Selecting Mainline Hose for Manure Distribution". A great guide for buying Mainline Hose and then you will know why we recommend Mandal's Mainline Hose to our customers.Mandals is the preferred mainline hose that Triple K Irrigation offers for sale. We believe that Mandals hose offers the best value for the money when indexed across variables like durability and wear resistance. This means that Mandals hoses last longer in the field with fewer repairs or replacements. Mandals hose allows for rapid deployment and retrieval saving you time and effort. They also offer excellent flow rates and are resistant to most industrial and agricultural chemical, ozone and UV-rays. In short, when your business requires the very best, we believe that Mandals is the best option for mainline hose. FEATURES
- Transfer at higher than normal working pressures
- Lightweight and easy to deploy
- Ultimate abrasion and puncture resistance
- High diameter and extension stability
- Minimum snaking of pressurized hose
- Thermoplastic polyether based polyurethane (TPU)
- State of the art “through the weave” extrusion technology
- Heavily reinforced and stabilized weave, using high tenacity polyester filament yarns
- Excellent adhesion between cover/lining and the weave
- Full diameter recovery after pressure release
- Excellent hydrolysis and fungus resistance
- Resistance to a wide range of chemicals
- Temperature range -50 to 75 ºC (pure water)
- Excellent UV, Ozone and weathering resistance
- Leak proof tested section lengths up to 200 mts.
Mandals Mainline hose 6", 8" and 10" - Lengths 660'
Manufacturer: Fenner MandalsCALL 517.458.9741 FOR TODAY'S SALE PRICEAsk for Cedric or simply fill out the form below! -
Sale!A 1/4" emitterline designed for smaller plant and tree rings, Mini-Pepline distributes water through a tube emitter at 6" spacing with .5 GPH flow. Mini-Pepline also works in tandem with multi-port drip manifolds like the Octa-Bubbler, QB2 and Quadra Bubbler. The small footprint of Mini-Pepline allows the tubing to be hidden easily making it a great option for potted plants and small bushes with groundcover. Product Features
- 6" spacing (12" available by special order)
- Uses standard 1/4" barbed fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- Hydrodynamic emitter design ensures continuous flushing of sediments and small particles
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .250" OD x .170" ID - 1/4"
- Operating pressure range: 10 - 50 PSI
- Wall thickness: .040"
- Filtration requirements: 150 mesh
- Emitter flow rate: .5 GPH (nominal at 10 PSI)
- Coil length: 500'
