-
8" Female x 10.25" Male Shug Grip Reducer HF/ US coupling Brand: Metal 360
-
8" Male x 10.25" Male Shug Grip Reducer HF Brand Name: Metal 360
-
8" Female x 10.25" Female Shug Grip Reducer HF Brand Name: Metal 360
-
10.25" HF HD Ringlock Clamp Brand Name: Metal 360
For an overview of the different types of clamps available visit the following video:
Clamps Explained!
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
An Agri-Inject Electric Fertilizer Injector is a precision agricultural device used to inject liquid fertilizers, pesticides, or other agricultural chemicals directly into an irrigation system. This technology enables efficient and uniform distribution of nutrients or chemicals to crops, optimizing plant health and growth while reducing waste.
-
1" Insert x 3/4" MPT Adapter is used to couple a 1" rigid hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1" O.D. (outside diameter) opening to a 3/4" O.D. Previous SKU: G-00171 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Preset Pressure Regulator connects drip tubing or distribution tubing to any ¾” garden hose thread water source. The pressure regulator has a maximum operating pressure of 15 PSI. Consists of commercial grade, UV resistant plastic. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Regulator / Screen Assembly connects drip tubing or distribution tubing to any ¾” garden hose thread water source. The pressure regulator has a maximum operating pressure of 15 PSI. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Preset Pressure Regulator offers exceptional outlet pressure control to provide consistent performance from 1/2 to 12 gallons per minute. Both the inlet and the outlet are 3/4" FIPT (Female Iron Pipe Thread). It is made in the USA. Previous SKU: G-00174 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Sale!Product Features
- 12" spacing
- Uses standard Power Loc 55 fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .5"
- Operating pressure range: 7 - 60 PSI
- Wall thickness: .040"
- Filtration requirements: 120 mesh
- Emitter flow rate: 1 GPH (nominal at 10 PSI)
- Coil length: 100'
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
Want to see more Drip irrigation ideas? Visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 5″x5″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley -
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 6″x6″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Sale!1/2" - 3/4" - 1" Sizes of 100' - Clear Vinyl Tubing Available for purchase
-
#7 Berkeley Diaphragm - Height 2 5/8" (bottom to top of lip) x 6 3/4" Outside Diameter Top (outside of lip to outside of lip) x 5 1/2" Diameter Base Bottom (outside of lip to outside of lip).
-
Reducing PVC Tee Insert x Insert x Insert (Multiple options available -- Select Options)
-
PVC 90 deg Elbow Insert x MIPT, SCH 40, PVC (Multiple Sizes Available - See Options)
-
PVC 90 Degree Elbow Insert X Female Pipe Thread, SCH 40 PVC (Multiple Sizes Available - See Options)
-
90 Degree Street Elbow Female Pipe Thread x Male Pipe Thread, SCH 40 PVC (3 Sizes Available - See Options)
-
PVC Reducing 90 Degree Elbow Insert X Female Pipe Thread, SCH 40 PVC (Multiple Sizes Available - See Options)
-
PVC Tee Insert x Insert x Female Pipe Thread (Multiple options available -- Select Options)
-
Sale!2" Flange x FPT, Banjo 2" Full Port Flange x FML Pipe Thread
