Shop Irrigation Parts

  • Handle with Collar for 8″ Item 1 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
  • Sale!
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Foot Valve Vertical OD Tubing w/Conversion Tube

    Price range: $270.27 through $1,131.13
    Note: Every valve will leak if there is no head pressure pushing down and sealing the flapper.  Head pressure comes from the vertical down pressure of the volume of water above the valve.  The weight of the 4 vertical feet of head pressure will push down and seal the valve. Below is a diagram showing how to measure the four feet of vertical lift from the water surface up to the centerline of the pump.
    Head Pressure for Foot Valve

    Head Pressure for Foot Valve

  • These products are Currently Out of Stock!
    CALL 517.458.9741
    FOR NEW AND IMPROVED OPTIONS!
    Ask for Cedric

    Special Pricing on Mandal's 6" 660' DRX Drag Hose when you buy 3 or more. Call for details 517-458-9741

    Mandals Dragman Drag Hose (also known as Sludge Injection Drag Hose) is manufactured for umbilical drag systems. They are used for distribution of slurry and manure in agricultural fields. Drag Hoses are connected between slurry reservoirs (lagoons) and tow tractors. Mandals Dragman Drag Hose is the preferred dragline hose we offer because they offer the highest abrasion resistance and tensile strength and they offer environmentally friendly and safe manure distribution. A premium product offering both durability and wear resistance, they will save you time and money over the long haul. FEATURES
    • Designed for umbilical drag system used for distribution of slurry and manure in agricultural fields.
    • Engineered with extreme tensile strength and abrasion properties. High tenacity filament polyester yarn .
    DESIGN
    • Covered and lined with Thermoplastic Polyurethane (TPU).
    • Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave.
    • Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure.
    ADVANTAGES
    • Ultimate tensile strength and adhesion level polymer to weave.
    • Enhanced abrasion resistance.
    • High diameter and extension stability.
    • Low kink radius.
    • High puncture resistance.
    • Temperature range -50ºC to +75ºC (pure water) (-58 ºF to +167 ºF).
    • Standard lengths depending on diameter.
    • Excellent UV and weathering resistance.
    Dragman EXTRA is especially designed to withstand the extreme tensilestress, pulling forces and abrasion from umbilical slurry systems. Mandals Drag hose4.5", 5", 5.5", 6", 7", 7.25" and 8"Drag line - Lengths 660', and 990', 1320' (depending on size)
    Manufacturer: Fenner Mandals
    CALL 517.458.9741 FOR TODAY’S SALE PRICE
    Ask for Cedric or simply fill out the form below! 
    Name
  • These products are In Stock!
    CALL 517.458.9741
    FOR TODAY'S SALE PRICE
    Ask for Cedric   You may want to read the article "10 Tips For Selecting Mainline Hose for Manure Distribution". A great guide for buying Mainline Hose and then you will know why we recommend Mandal's Mainline Hose to our customers.
    Mandals is the preferred mainline hose that Triple K Irrigation offers for sale. We believe that Mandals hose offers the best value for the money when indexed across variables like durability and wear resistance. This means that Mandals hoses last longer in the field with fewer repairs or replacements. Mandals hose allows for rapid deployment and retrieval saving you time and effort. They also offer excellent flow rates and are resistant to most industrial and agricultural chemical, ozone and UV-rays. In short, when your business requires the very best, we believe that  Mandals is the best option for mainline hose. FEATURES
    • Transfer at higher than normal working pressures
    • Lightweight and easy to deploy
    • Ultimate abrasion and puncture resistance
    • High diameter and extension stability
    • Minimum snaking of pressurized hose
    DESIGN
    • Thermoplastic polyether based polyurethane (TPU)
    • State of the art “through the weave” extrusion technology
    • Heavily reinforced and stabilized weave, using high tenacity polyester filament yarns
    • Excellent adhesion between cover/lining and the weave
    ADVANTAGES
    • Full diameter recovery after pressure release
    • Excellent hydrolysis and fungus resistance
    • Resistance to a wide range of chemicals
    • Temperature range -50 to 75 ºC (pure water)
    • Excellent UV, Ozone and weathering resistance
    • Leak proof tested section lengths up to 200 mts.
    Designed for long life and maintenance-free service in the harshest environments. This market leading hose is tough and durable with exceptional resistance to abrasion and cutting Mandals Mainline hose 6", 8" and 10" - Lengths 660'
    Manufacturer: Fenner Mandals
    CALL 517.458.9741 FOR TODAY'S SALE PRICE
    Ask for Cedric or simply fill out the form below!
    Name
  • Sale!

    Cast Iron Flange 4″ (Slightly Used One Season)

    Original price was: $989.09.Current price is: $456.00.
  • Sale!

    Plastic Pressure Regulator 4″ Victaulic and 3″ FPT (Slightly Used One Season)

    Original price was: $808.24.Current price is: $364.52.
  • Cornell irrigation and manure handling pumps are constructed with top quality materials. Made up of Cast Iron, bronze fitted, or all iron construction, Cornell's pumps meet or exceed optimum efficiency standards for centrifugal pumps. Other options are available for pumps required to move abrasive or caustic materials. Standard features include balanced impellers, heavy duty shafts, replaceable shaft sleeves, and replaceable wear rings or wear plates. In addition to the bulletproof design of their standard pumps, Cornell's legacy manure pumps are specifically designed for coarse abrasive slurry applications such as manure, sand, and gravel. Additionally, Cornell Pumps:
    • Optionally fitted with Cornell's patented Run-Dry and Redi-Prime systems.
    • Outfitted with an array of different impeller options and cutters.
    • Can be outfitted with standard packing or mechanical seals.
    • Available in frame mount, engine mount, or close coupled with an electric motor.
    • Pump discharges can be oriented to customer specifications.
    • Larger models feature a "Double Volute"
    • Suction inlets are smooth and contoured for improved hydraulic performance.
    Contact us today at 517-458-9741 to speak to a sales rep about all the options options Cornell has to offer and we will help you select the right pump for you! Or email us at info@irrigationsupplyparts.com and we will call you. If you are looking for replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you. We'll be happy to size a Cornell pump for your irrigation or manure handling needs. And be sure to ask us why we recommend installing a vacuum pressure gauge on every pump. It will make your job much easier when you are trying to diagnose the difference between a clogged intake or a worn seal. I promise!
  • Out of stock
    Sale!

    Cadman 4000S-WB Hard Hose Traveler (SOLD!!!)

    Original price was: $69,055.00.Current price is: $56,000.00.
    Pre-Tariff Special. Brand New. Only one available. Call for details today! Ask for Cedric. 517-458-9741
    The Cadman 4000S-WB is a robust and versatile irrigation reel system designed to meet the demanding needs of farmers. It delivers efficient, reliable water management solutions for large-scale agricultural operations, helping optimize crop yields and resource use.

    Key Features:

    1. Heavy-Duty Construction:
      • Built with durable materials like galvanized steel for long-term resilience against harsh weather and field conditions.
      • Designed to handle tough terrains and demanding irrigation needs.
    2. Large Hose Capacity:
      • Can accommodate long lengths of hose, allowing it to cover extensive fields without requiring frequent repositioning.
      • Ideal for irrigating large tracts of farmland.
    3. Efficient Water Distribution:
      • Features a high-performance turbine drive system for consistent, uniform water application.
      • Ensures even irrigation to prevent overwatering or underwatering.
    4. Adjustable Speed and Range:
      • The reel system allows for customizable speed adjustments to suit specific crop and soil requirements.
      • Wide range of coverage for flexible operation.
    5. Mobility and Portability:
      • Equipped with a wheel-based design (WB) for easy transport across fields.
      • Compact and easy to maneuver, making it practical for multi-field use.
    6. Compatibility:
      • Works with a variety of sprinkler heads and pumps, allowing farmers to adapt the system to their specific needs.
    7. Low Maintenance:
      • Simple, user-friendly design minimizes downtime and operational complexity.
      • Components are designed for easy access and maintenance.

    Benefits for Farmers:

    1. Maximizes Irrigation Efficiency:
      • Covers large areas with minimal effort, reducing labor and time required for irrigation.
      • Precise water application enhances crop growth and yield.
    2. Cost-Effective:
      • Reduces water waste and ensures optimal use of resources.
      • Durable build minimizes replacement and repair costs over time.
    3. Enhanced Productivity:
      • Frees up labor for other tasks by automating large-scale irrigation.
      • Saves energy with its efficient drive system.
    4. Versatility:
      • Suitable for a wide range of crops, from grains to vegetables, making it adaptable for various types of farming.
    5. Reliability:
      • Withstands tough farming environments, ensuring uninterrupted irrigation even under demanding conditions.
    6. Sustainability:
      • Supports responsible water management, aligning with environmental and cost-saving goals.

    The Cadman 4000S-WB is an excellent choice for farmers seeking an efficient, durable, and versatile irrigation solution to support their agricultural operations and maximize productivity.
    Call today for more information! 517-458-9741
  • Sale!
    Self Flushing Filters
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Self Flushing Filters

    Price range: $11,740.50 through $13,101.00
    FILTOMAT by Amiad Self Flushing Filters View Product Specifications Here: https://he.amiad.com/wp-content/uploads/2020/06/M104XLP-M106XLP-M108LP-M110P-IOM-EN.pdf Brand Name: Amiad   
  • Sale!

    8″ Female x 10.25″ Male Shug Grip Reducer HF

    Original price was: $469.00.Current price is: $445.55.
    8" Female x 10.25" Male Shug Grip Reducer HF/ US coupling Brand: Metal 360   
  • Sale!

    8″ Male x 10.25″ Male Shug Grip Reducer HF

    Original price was: $439.83.Current price is: $417.84.
    8" Male x 10.25" Male Shug Grip Reducer HF Brand Name: Metal 360   
  • Sale!

    8″ Female x 10.25″ Female Shug Grip Reducer HF

    Original price was: $457.33.Current price is: $434.47.
    8" Female x 10.25" Female Shug Grip Reducer HF Brand Name: Metal 360   
  • Sale!

    Amiad Duplex Gravity Fertilizer 4-03 3/4″/25 mm 8 Bar 500 LH w/o Control

    Original price was: $2,637.00.Current price is: $1,977.75.
    Amiad Hydraulic Fertilizer Injector
    • Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
    • Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
    • Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
    • The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
    Controlling the Injection Rate:
    • Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
    • The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
    • Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
    • The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
    Features
    • Amiad Injectors bring accuracy and efficiency to agriculture fertigation
    •  Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
    •  No more waste of expensive chemicals, labor and machinery
    •  Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
    •  Simple operation and maintenance
    •  Excellent mechanical strength, corrosion resistance and chemical durability
    Brand Name: Amiad   
  • Sale!
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Female Threaded Ansi Flange

    Price range: $29.53 through $56.63
  • Sale!

    3/4″ Male Pipe Thread x 1″ Hose Barb- 90 Degree

    Original price was: $3.22.Current price is: $1.93.
  • Sale!

    1 1/4″ Union Valve

    Original price was: $81.45.Current price is: $48.87.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details
    PVC Tee Insert x Insert x Female Pipe Thread (Multiple options available -- Select Options)
  • Sale!

    2″ Flange x Full Port Thread

    Original price was: $35.36.Current price is: $21.22.
    2" Flange x FPT, Banjo 2" Full Port Flange x FML Pipe Thread
  • Sale!

    3″ Flange x Hose Barb

    Original price was: $23.79.Current price is: $14.27.
    3" Flange x 3" Hose Barb, Banjo
     
  • Sale!

    3″ Flange x Female Pipe Thread

    Original price was: $56.92.Current price is: $34.15.
  • Sale!

    3″ Worm clamp

    Original price was: $18.37.Current price is: $11.02.
  • Sale!

    2″ Full Port Flanged Manifold Stubby Valve

    Original price was: $122.58.Current price is: $73.55.
  • Sale!

    3″ Full Port Flanged Stubby Valve

    Original price was: $297.99.Current price is: $178.79.
  • Sale!

    2″ Manifold Y Strainer

    Original price was: $167.09.Current price is: $100.25.
  • Sale!

    2″ Flange x Male Adapter

    Original price was: $15.34.Current price is: $9.20.
  • Sale!

    2″ Flange x Female Coupler

    Original price was: $35.22.Current price is: $21.13.
    2" Flange x Female Coupler
  • Sale!

    2″ Flanged Tee

    Original price was: $21.04.Current price is: $12.62.
    2" Flanged Tee
  • Sale!

    3″ Flanged Tee

    Original price was: $99.13.Current price is: $59.48.
    3" Flanged Tee
  • Sale!

    8″ Repair Coupler PIP (Epoxy)

    Original price was: $170.00.Current price is: $154.70.
    This is used to repair PVC. Includes gaskets. Brand Name: Pierce
  • Sleeve, 3.00 x 2.62 x 4.25 Undercut 6NHTB Chrome Sleeve If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
  • Wear Ring, Fits in Suction Cover, Wear Ring for 6NHTB, 6NHTB also uses 27-A2441-6-SG If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
  • Select options This product has multiple variants. The options may be chosen on the product page / Details

    Cherne Clog-Buster Drain Flusher

    Price range: $11.86 through $29.03
    Clog-Buster Drain Flusher
    • Unclogs drain pipes in seconds
    • Simply remove aerator from spigot or faucet and attach faucet adapter
    • Attaches to standard garden hose fitting
    • Insert clog buster as far as possible into drain and slowly turn on the cold water - clog should dislodge almost immediately
    • Eliminates need for using chemicals
  • End cap without air relief and end cap with 2" air relief. Galvanized steel Various sizes all with 42" Length Please call and speak with one of our Sales Specialist about Size, Price and Availability.
  • Sale!

    Tee Riser in Galvanized Steel 6x6x4x42

    Original price was: $345.59.Current price is: $314.49.
    Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
  • Durable T Pipe for underground irrigation systems. Simple and fast connections. Multiple sizes available. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
  • Galvanized Steel Z Pipe Short Base Underground Riser: Female or Male Top galvanized steel underground riser with manufacturer warranty. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
  • Durable: Nitrile rubber cover increases resistance to oil, fuel, most chemicals and petrochemicals; and stands up to ozone and oxidation. Rugged: 100% high tenacity yarn, extruded with thru-the-weave nitrile rubber construction for strength and greater flow. Service Worthy: Light weight allows for fast deployment and retrieval, saving time and money. High-Performance: Rubber construction delivers maximum durability, flexibility and service life.   Tested: Performance rated at -5°F to 200° F (-20°C to 93°C). Certified: Manufactured within the scope of our ISO-9001: 2015 certified quality assurance system. AG FEEDER HOSE LAY-FLAT NITRILE RUBBER HOSE

    CONSTRUCTION Extruded Nitrile Cover/Liner Polyester/Nylon Reinforcement

    TEMPERATURE RANGE -5° to 200°F (-20° to 93°C)

    STANDARD LENGTH 660' (200M) HOSE COLORS - Black

    AG Data Sheet Download
    For pricing and availability call in today and speak with one of our Sales Associates.
  • Hose Construction – 100% high tenacity yarn, extruded with thru-the-weave polyurethane construction. Chemical Resistance –  capable of withstanding exposure to most hydro-carbons, gasoline, oils, alkalis and grease with no effect on the performance of the hose. Ozone Resistance –  shows no visible signs of cracking of the liner or cover when subjected to testing in accordance with ASTM D1149-64, 100 PPHM/122°F/70 hours Abrasion Resistance – Abrasion resistance 5X that of conventional rubber hose, 300,000 cycles on a Taber abrasion tester without exposure of the jacket. Designed for maximum service life and low operating cost. Fast deployment and retrieval – saving time and money Easy to store and transport Standard length – 660’ (200M), shorter lengths available Color – Brown, Blaze Orange Manufactured within ISO-9001: 2015 certified quality assurance system GROW YOUR OPERATIONS WITH ALL-AMERICAN QUALITY AGRICULTURAL HOSES Catering to generations of America’s growers, dealers and farmers, All-American Hose proudly offers a full line of hoses and couplings that are built to efficiently manage agri-business operations. Whether you need sludge injection hoses, feeder main lines or irrigation lines, they engineer and build premium quality hoses that are flexible, lightweight and ultra-durable to handle the job in any condition—from freeze/thaw cycles to extreme heat. To order please call in speak to one of our Sales Associates for pricing and availability.
  • Sale!
    Banjo Cap - Threaded, Threaded Cap, Banjo Cap
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Cap – Threaded

    Price range: $5.19 through $10.22
    Cap - Threaded. Made out of heavy-duty and durable polypropylene.    
    • Excellent chemical resistance.
    • Glass reinforced polypropylene.
    • Heavy duty (Schedule 80).
    • Lightweight with excellent strength.
    • NPTthreads.
    • Pressure to 150 P.S.I. at 70°F.
    *Remember to check out our full line of Banjo Fittings Brand Name: Banjo
  • Sale!
    Taper Ring Nozzles
    Select options This product has multiple variants. The options may be chosen on the product page / Details

    Taper Ring Nozzle Set for Nelson SR150 Big Gun – Cap, Body & One Taper Ring (Choose A Size)

    Original price was: $209.06.Current price is: $146.34.
    A Taper Ring Nozzle Set combines the changeability of a traditional ring nozzle while providing some of the efficiency of a taper bore nozzle. This Taper Ring Nozzle Set for a Nelson SR150 Big Gun includes the Cap, Body and One Nozzle available in 7 sizes ranging from 0.87" to 1.34" (22 mm to 34 mm) . Please see the charts below to assist you in choosing the best nozzle for your specific needs. Brand Name: NelsonNelsonLogo
Go to Top