-
Does your Komet Big Gun Sprinkler need a little TLC? We have the rebuild kits you need. If you don't see the part you need, give us a call at 517-458-9741 and we will get it shipped to you ASAP! Komet Rebuild Kit for Komet Big Gun Twin Max This kit includes the parts shown in the accompanying diagram under A.00.0 - Consists of (6) Bolt M6x60 (A11), (6) Washer 6 (A12), (4) Brake Spring (24), (1) Housing Cover (A1), (4) Bolt M6x25 (A6), (2) Brake Disk (A4), (1) Collar Bearing (A3), (1) Housing Bearing (A2), (6) Washer 6 (13), (6) Nut M6 (A14), (1) Retaining Ring (A7), (2) Collar for bearing (A8), (2) Trip Stop Ring (A9), (4) Washer 6 (A22), (4) Bolt M6x35 (A23), (1) O-Ring 2425 (A30), (1) O-Ring 158 (A31), (2) Brake Pad Upper (A16), (1) Bearing (A17), (1) Brake Lining (A18), (1) Support Ring (A5), (1) O-Ring 6237 (A19), (1) Retaining Ring (A20), (1) Lip Seal (A21), (1) Base (A10.1), (1) O-Ring 3225 (A32), (1) Adapter/2" BSP (A27.1), (1) Adapter/2" NPT (A28.1) and (4) Bolt M8x25 (A29.1)
-
The WER 10 Tooth Drive Gear Assembly (160-TRI-ASSM-000061) is engineered for reliable, efficient power transfer in slurry and manure pump systems. With its precision-machined 10-tooth design, this gear assembly ensures smooth operation, proper alignment, and consistent torque delivery. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
The WER 14 Tooth Drive Gear Assembly (160-TRI-ASSM-000028) is built for dependable power transfer in slurry and manure pump systems. Featuring a precision-machined 14-tooth design, this gear assembly delivers smooth torque transmission, reliable alignment, and efficient operation under heavy-duty conditions. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Wear Ring, Fits in Suction Cover, Wear Ring for 6NHTB, 6NHTB also uses 27-A2441-6-SG If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
-
Out of stock
Product Overview
The 100' x 6" Layflat Nitrile Rubber Hose is engineered for high-volume water transfer in demanding agricultural environments. Built from durable nitrile rubber with a reinforced textile construction, this hose lays flat for easy transport and storage, yet performs under high flow and pressure when deployed.
Designed for farmers, irrigators, and manure management professionals, this hose handles rugged field conditions while maintaining flexibility and kink resistance.
NOTE: This hose is rated at 250 PSI.
This hose comes with Pierce Female Ends on each end for easy use.
Call 517-458-9741 for a freight quote.
-
Do you need to control the flow of water to different sections of your operation? Lever valves, also known as lever-operated valves, are commonly used in water irrigation systems to control the flow of water. These valves feature a lever handle that can be manually operated to open or close the valve. Lever valves are simple, reliable, and easy to operate, making them suitable for various applications in water irrigation. In irrigation systems, lever valves are typically installed along the pipeline to regulate water flow to different sections or zones. They can be used to turn water on or off to specific areas or adjust the flow rate as needed. Lever valves are commonly found in sprinkler systems, drip irrigation systems, and other types of agricultural and landscaping irrigation setups. For decades Metaltecnica has been an industry leader in valve manufacturing. Imported from Italy, you can guarantee our valves are of the highest quality. This 6" MZ Brass Lever Valve has a four bolt flange on one side and female NPT on the other side. Also known as a MZ Stem Gate Valve.
-
Dosatron fertilizer injectors can be used in a variety of installations and configurations. Mount them on booms or benches. Increase your flow with parallel installations, or inject multiple nutrients with series installations. It’s all up to you! Examples
Aquaponics
Indoor Farming and Agriculture
Stacked Farming
Urban Gardening and Farming
Drain-to-Waste- Connection Size: 3/4" NPT
- Percentage Range: 0.2 to 2%
- Unit Weight: 6 lbs
- Ounces Per Gallon Range: 0.256 to 2.560
- Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
- Pressure: 4.3 to 85 PSI
- Dimensions: 19 1/8" x 6 5/16"
- Ratio Range: 1:500 to 1:50
-
Sale!A backwash pressure of 45 PSI is required (nozzles on two sides) How these strainers work: A small amount of water is returned from the discharge side of the pump to the strainer. Inside, two special nozzles spray against the screen, causing it to revolve. Any debris (e.g., algae, aquatic plants, or leaves) attracted to the screen is blasted off every half revolution. Strainers operate in any position, and require only 35 psi to operate. Eliminate Hot Spots: These strainers are designed with internal PVC suction tube with smaller holes at the top, (nearer to the pump), and larger holes at the bottom (farther from the pump) to even the draw or suction across the entire height of the cylinder screen. This prevents water from flowing in harder at the top of the screen, which leads to “hot spots.” (Clogging). Our screens utilize the full surface area for extremely consistent through-screen velocity, which maximizes the effectiveness of the cleaning nozzles. Watch our video: Strainers Explained
-
This Double Acting Air Cylinder is an accessory for 4", 6" or 8" MZ Brass Slide Valve.
-
Sale!This is a horizontal strainer screen. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
The WER Auto Reverse Hydraulic Valve (TRI-PUR-000244) is designed to protect manure and slurry pump systems by automatically reversing hydraulic flow when a blockage occurs. This feature quickly clears obstructions, minimizing downtime and reducing stress on pumps and driveline components. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Engineered for long-lasting performance in the field, Kuriyama’s OroFlex Hose features an exclusive thru-the-weave liner and nitrile rubber construction, making this rugged hose incredibly durable, with superior abrasion and puncture resistance—which is critically important for main feeder line functionality. Its rubber composition keeps OroFlex light enough for easy deployment and retraction, making it the go-to hose for tackling demanding agricultural applications.
General Applications
- Agriculture
- Cable covering
- Dewatering
- Drainage
- Floatation booms
- Industrial washdown
- Irrigation
- Limited oil and chemical applications
- Pump discharge
- Watering
Features and Advantages
- Proprietary PVC/Nitrile Material – Specially developed PVC/Nitrile material provides superior abrasion, UV, chemical and oil resistance compared to PVC hoses.
- Unique Woven Construction – Specially designed weave pattern provides resistance to snaking, kinking, stretching and twisting.
- Compact Design – Flat hose design rolls up into tight coils for easy storage and transport, takes up less space than other hoses.
Service Temperature [Min]
-22 ºF-30 ºC Service Temperature [Max]
176 ºF80 ºC
Designed for Maximum Durability, Flexibility, and Service Life Fast deployment and retrieval – saving time and money Easy to store and transport Standard length – 200’ , shorter lengths available Color – Black Warranty – One year limited warranty against manufacturing defects. 200' rolls are also available. Please call Cedric at 517-458-9714 for pricing and freight quote.Working Pressure at 68ºF
150 psi -
Murphy Engine Panel - 75160 Series
This Swichgage panel is specifically configured for irrigation engines and includes loss of pump discharge pressure Swichgage instrument. The panel is enclosed on top, bottom, and both ends. Mounting flanges extend on top and bottom. The back of the panel is open. Access holes are in the bottom. Panel Kits Include:- Low Lube Oil Pressure Swichgage instrument
- High Coolant/ Temperature Swichgage instrument
- 518PH Magnetic Switch.
- PB128S Emergency stop push button.
Click Here for Swichgage® Shutdown Panels for Irrigation Engines and Pumps Brochure
For diesel engines without shut-down solenoid in the injection pump, add a Murphy SV Series solenoid fuel shut-off valve.
We stock the SV-12 and SV-24 in an effort to meet your needs.
Brand Name: Murphy 
-
The WER Tella 400CC Hydraulic Motor (TRI-PUR-000270) is built for demanding manure and slurry pump applications, delivering consistent torque and dependable power under heavy load. Engineered for durability, this 400CC motor withstands high pressures and continuous use in tough agricultural environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!The 75 Series Big Gun® is a perfect fit for solid set irrigation, pivot end gun irrigation, sports field applications, feed lot, mining, and more. This Nelson 75 Series Big Gun comes as a Part Circle (24 Degree trajectory) sprinkler with a 2" FNPT connection. No nozzle is included. Nozzles are sold separately.
Click here for access to the Taper Ring Nozzles for the Nelson SR 75 Big Gun available for purchase.
Performance Range: 30 to 160 GPM 25 to 80 PSI Brand Name: Nelson WARRANTY AND DISCLAIMER Nelson Big Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service.
-
MECHANICAL SEAL FOR 6NHTB & 4NHTB If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
-
Sale!
High-Performance Big Gun for Long-Throw Irrigation
Special Pricing While Supplies Last! A great choice for dust control!The Komet Twin AP101/Ultra PC-44 2" NPT Gun is engineered for growers who need dependable, high-volume water application with exceptional distribution uniformity. Designed for traveler systems, solid-set applications, wastewater, and lagoon pumping setups, this big gun combines Komet’s proven drive system with precision nozzle technology to deliver consistent performance under demanding field conditions.
If you’re irrigating large acreages and need reliable throw distance with minimal maintenance downtime, this unit is built for it.
All Nozzles are Sold Separately:Komet offers 12 nozzles available for purchase –
New Style CLICK HERE
Old Style CLICK HERE
Nozzle Range: 10.0 – 24.0 mm / 0.39″ – 0.94″ Flow Range: 5.4 – 56.4 m³/h / 24 – 268 gpm Throw Range: 21.6 – 54.3 m / 148 – 371 ft
Please call us for more details.
-
Sale!
No April Fools on this offer. Save $200. Was $1,200. Now $1,000. Only one to sell!
Product Overview
The 200' x 6" Layflat Nitrile Rubber Hose is engineered for high-volume water transfer in demanding agricultural environments. Built from durable nitrile rubber with a reinforced textile construction, this hose lays flat for easy transport and storage, yet performs under high flow and pressure when deployed.
Designed for farmers, irrigators, and manure management professionals, this hose handles rugged field conditions while maintaining flexibility and kink resistance.
NOTE: This hose is rated at 250 PSI.
This hose comes with Pierce Female Ends on each end for easy use.
Call 517-458-9741 for a freight quote.
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 3″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. This Automatic Discharge Priming Valve by Berkeley allows a centrifugal pump to be primed by closing off the discharge side of the pump with an airtight seal. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley -
Sale!The 100 Series Big Gun® sprinkler is the classic high volume sprinkler - dominating the pivot end gun market for years. It's also a perfect fit for permanent and portable set irrigation systems. Simply put, no other sprinkler is used and excels in a more diverse range of applications. The 100 Series is available with the widest range of options and accessories in the industry. Full or Part Circle models, multiple trajectories (including an adjustable model), three different nozzle styles, special coatings and effluent options for industrial applications - there is nothing the 100 Series won't do. WARRANTY AND DISCLAIMER Nelson Big Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service.
-
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs, Komet Twin Max Big Volume Guns are for Travelers, Pivots and Solid-Sets Part Circle / 24° Trajectory Angle 2" NPT Connection No Nozzle Included With Gun All Nozzles are Sold Separately:
Komet offers 12 nozzles available for purchase -
New Style CLICK HERE
Old Style CLICK HERE
Nozzle Range: 10.0 – 24.0 mm / 0.39″ – 0.94″ Flow Range: 5.4 – 56.4 m³/h / 24 – 268 gpm Throw Range: 21.6 – 54.3 m / 148 – 371 ft
Please call us for more details.
Brand Name: Komet
WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs, This is Komet's latest style of gun. They have taken what was great about their Komet Twin 101 Plus and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included Flange connection All Nozzles are Sold Separately:
9 nozzles available for purchase – CLICK HERE.
Nozzle Range: 12.0 – 28.0 mm / 0.47″ – 1.10″ Flow Range: 7.8 – 79.2 m³/h / 35– 363 gpm Throw Range: 24.2 – 60.6 m / 161 – 404 ft Please CLICK HERE for REPAIR / REPLACEMENT parts. Brand Name: Komet WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
The WER Removable Chopper Cartridge Assembly – HP (TRI-ASSM-001125) is designed for high-performance cutting and fast, simple replacement. Engineered to handle fibrous and abrasive materials in manure and slurry systems, this cartridge assembly prevents pump blockages, reduces wear, and maintains consistent flow. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Engineered for long-lasting performance in the field, Kuriyama’s OroFlex Hose features an exclusive thru-the-weave liner and nitrile rubber construction, making this rugged hose incredibly durable, with superior abrasion and puncture resistance—which is critically important for main feeder line functionality. Its rubber composition keeps OroFlex light enough for easy deployment and retraction, making it the go-to hose for tackling demanding agricultural applications.
General Applications
- Agriculture
- Cable covering
- Dewatering
- Drainage
- Floatation booms
- Industrial washdown
- Irrigation
- Limited oil and chemical applications
- Pump discharge
- Watering
Features and Advantages
- Proprietary PVC/Nitrile Material – Specially developed PVC/Nitrile material provides superior abrasion, UV, chemical and oil resistance compared to PVC hoses.
- Unique Woven Construction – Specially designed weave pattern provides resistance to snaking, kinking, stretching and twisting.
- Compact Design – Flat hose design rolls up into tight coils for easy storage and transport, takes up less space than other hoses.
Service Temperature [Min]
-22 ºF-30 ºC Service Temperature [Max]
176 ºF80 ºC
Designed for Maximum Durability, Flexibility, and Service Life Fast deployment and retrieval – saving time and money Easy to store and transport Standard length – 200’ , shorter lengths available Color – Black Warranty – One year limited warranty against manufacturing defects. 200' rolls are also available. Please call Cedric at 517-458-9714 for pricing and freight quote.Working Pressure at 68ºF
150 psi -
Tired of having to hand pump your suction lines? Prime your pumps with ease with this 12 Volt Vacuum Pump! 30 C.F.M. Pumping Capabilities: 3200 RPM DC Motor Easy Operating Panel Mount Valve /12V Switch 3L Oil Reservoir with Mounting Brackets (use 10 or 20 Non-Detergent Oil, or Automatic Transmission Oil or #32 Light Hydraulic Oil) Kits come with everything needed to plumb to your existing pump setup Easy Installation Huge Air Volume High Suction Lift 3/4" Pipe Thread Plumbing Fittings Other variations of this model are available Generally speaking: For precise vacuum levels at specific CFM rates, the manufacturer's performance curve or datasheet would be ideal. However, the above estimation provides a general understanding based on typical vacuum pump performance:
- 30 CFM: ~0-5 inHg
- 20-25 CFM: ~5-10 inHg
- 10-15 CFM: ~15-20 inHg
- <5 CFM: ~25-29.92 inHg
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 4″x4″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs, This is Komet's latest style of gun. They have taken what was great about their Komet Twin 140 Plus and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included Flange connection All Nozzles are Sold Separately:
10 nozzles available for purchase - CLICK HERE.
Nozzle Range: 16.0 – 34.0 mm / 0.63″ – 1.34″ Flow Range: 13.8 – 116.8 m³/h / 62– 535 gpm Throw Range: 29.0 – 68.7 m / 192 – 459 ft Please CLICK HERE for REPAIR / REPLACEMENT parts.
Brand Name: Komet
WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!The 150 Series sprinklers have larger nozzle sizes that allow for wider sprinkler spacing in industrial and solid set applications, and wider row spacing in traveler applications. The 150 Series is available with the widest range of options and accessories in the industry. Full or Part Circle models, multiple trajectories (including an adjustable model), three different nozzle styles, special coatings and effluent options - we have a unique solution for any application. Nelson 150 Series Big Gun® is a perfect fit for solid set irrigation, traveler irrigation and dust suppression. This Nelson SR150 Big Gun is a Part Circle, Slow Reverse Sprinkler with a 24 Degree Trajectory and Nelson Flange Connection. No nozzles are included. Nozzles sold separately.
Click here for access to the Taper Bore Nozzles for the SR150 Big Gun.
Click here for access to the Ring Nozzle Set for the SR150 Big Gun.
Click here for access to Taper Ring Nozzle Set & Rings for the SR150 Big Gun.
PERFORMANCE:100-550 GPM(23-150 M³/H)
50-120 PSI(4-9 Kg/cm²
Please contact us if you are interested in the Nelson 150 Series with other variables such as 21 Degree or 43 Degree trajectory or a 3" FNPT connection for example. Brand Name: Nelson WARRANTY AND DISCLAIMER Nelson Big Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs, This is Komet's latest style of gun. They have taken what was great about their Komet Twin 160 Pro and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included Flange connection All Nozzles are Sold Separately:
11 nozzles available for purchase - CLICK HERE.
Nozzle Range: 18.8 – 38.0 mm / 0.71″ – 1.50″ Flow Range: 21.7 – 168.0 m³/h / 92– 738 gpm Throw Range: 37.8 – 79.8 m / 227 – 523 ft Please CLICK HERE for REPAIR / REPLACEMENT parts.
Please call us for more details.
Brand Name: Komet
WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!Amiad Hydraulic Fertilizer Injector
- Amiad hydraulic fertilizer injector is constructed from corrosion and chemical resistant materials. The unit is resistant to nearly all known chemicals presently used in agriculture and horticulture.
- Amiad hydraulic fertilizer injector needs no external power to operate. Its linear hydraulic motor is powered by the hydraulic pressure of the irrigation system. The injector uses this pressure as the energy source for injecting fertilizer to the pressurized irrigation lines.
- Liquid fertilizer enters the injector through the Suction Port and is injected to the downstream irrigation line through the injection line.
- The water consumption of the hydraulic motor is 3 times the quantity of the chemical injected and can produce an injection rate of up to 1.4 gpm (320 liter/hour). The Injector is supplied ready to operate. The user has to supply two ¾” manual valves, one for the Drive-water port and the other for the Injection port. A 25 mm drainage line should be also connected to the injector’s Water-exhaust port.
- Since the injection rate is proportional to the irrigation line pressure, the required injection rate can be adjusted by throttling the injection line using the ¾” manual valve on the injection port.
- The volume of fertilizer injected at each pulse is 33 cc; therefore the hourly rate of injected fertilizer in liter/hour is easily calculated by counting the actual number of pulses per minute and multiplying this number by two.
- Amiad also supplies very accurate chemical resistant flow regulators, ranging between 2.6 gallons (10 liter) and 21.1 gallons (80 liter) per hour.
- The Flow Regulator assembly contains interchangeable color coded flow regulators to be installed in the chemical injection line. The flow regulator assembly also contains a chemical resistant filter for preventing the flow regulators from clogging.
- Amiad Injectors bring accuracy and efficiency to agriculture fertigation
- Wide range of models supporting field crops, orchards, vegetables, horticulture, greenhouses, gardening, golf courses and municipal landscaping
- No more waste of expensive chemicals, labor and machinery
- Preventing uncontrolled chemical pollution, unnecessary soil compress and crop damage
- Simple operation and maintenance
- Excellent mechanical strength, corrosion resistance and chemical durability
-
The WER Mobile Frame is engineered to provide a strong, stable, and portable platform for your manure management equipment. Outfitted with durable 205/75R14 wheels, it ensures smooth mobility, even in demanding field conditions. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!Are you looking to cover a large area efficiently with a large volume of water? Komet Big Volume Sprinklers 'have got you covered". Komet is known for providing uniform water distribution, long throw length, and providing energy efficiency (matching the water pressure to your coverage needs). Komet Guns are also reliable and adaptable to your needs,This is Komet's latest style of water gun (or sprinkler) at a cost-effective price. They have taken what was great about their Komet Twin 202 Pro and made even more improvements to it. Part Circle with Trajectory Angle 24° No Nozzle Included With Gun Flange connection All Nozzles are Sold Separately:
13 nozzles available for purchase - CLICK HERE.
Nozzle Range: 22.0 – 45.0 mm / 0.87″ – 1.77″ Flow Range: 32.4 – 235.0 m³/h / 137 – 1032 gpm Throw Range: 41.5 – 90.0 m / 247 – 590 ft Please CLICK HERE for REPAIR / REPLACEMENT parts.
Please call us for more details.
Brand Name: Komet
WARRANTY AND DISCLAIMER Komet Big Volume Gun sprinklers are warranted for one year from date of original sale to be free of defective materials and workmanship when used within the working specifications for which the product was designed and under normal use and service. -
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 6″x6″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Sale!Do you need to prime a pump to remove gas and air from your pump and suction pipe? The Automatic Discharge Priming Valve is designed to automatically expel air or gas from the pump and suction piping during the priming process. It typically consists of a valve body with an inlet and an outlet, along with an internal mechanism that senses the presence of air or gas. When air or gas is detected, the valve opens to allow the expulsion of the air or gas from the system, thereby facilitating the priming process. By using the 5″x5″ Automatic Discharge Priming Valve, pump operators can ensure that your centrifugal pump systems are properly primed, leading to optimal pump performance and preventing potential issues caused by air or gas accumulation. We not only stock new discharge priming valves, but also the replacement parts. Please see the parts breakdown below. We offer a Clack Rebuild Kit as well as the Spring for your repair needs. Please call us if you don't see what you need. We're happy to assist you.
Brand Name: Berkeley
-
Sale!200 Series Big Gun® is a perfect fit for reclaimed water and other applications where maximum flow is desired. The standard Nelson SR200 Big Gun comes as a Part Circle, Slow Reverse Sprinkler with a 24 Degree Trajectory. No nozzle is included. Nozzles are sold separately.
Click here for the Taper Bore Nozzles for the Nelson SR200 Big Gun.
Click here for the Ring Nozzle Set for the Nelson SR200 Big Gun.
PERFORMANCE 250-1200 GPM (55-275 M³/H) 60-130 PSI (4-9 Kg/cm²) The 200 Series is the largest sprinkler in the Big Gun® family. It is most commonly used in hose reel traveler and industrial applications. It is capable of throw distances up to 310 ft (95 m) and flows up to 1200 gpm (272 m3/hr). A wide range of options and accessories are available to solve the most diverse applications, including full- or part-circle models, multiple trajectories, different nozzle types, special coatings and effluent options. Connections: Flanged / Threaded Adapters Nozzles: Taper Bore / Ring Options: Anodized / Anodized & Powder Coated / Effluent Bearing Assembly Accessories: Counterbalance Kit / 12° Wedge Kit / Manure KitAPPLICATIONS
Center Pivot - Traveler - Portable-Move - Permanent Set - Dust Suppression - Reclaimed Water - MiningBrand Name: Nelson
-
Filtration is the first line of defense in the irrigation chain, protecting your system and ensuring high production quality and profitable yields.
How the Mini Sigma Filter Works How to Install the Mini Sigma Annual Maintenance Kit The Filtration Process Raw water enters through the filter inlet and passes through the screen. Clean water flows through the filter outlet. The gradual dirt buildup on the screen’s inner surface causes a filter cake to develop, creating an increase in the pressure differential across the filter system. A differential pressure (DP) switch senses the pressure differential and when it reaches a pre-set level, the self-cleaning process begins. The Control System - Amiad’s NEW ADI-P Controller Amiad’s ADI-P controller offers a one-of-a-kind monitoring and control functionality. The controller interacts with Amiad’s advanced, user-friendly app that provides detailed filtration performance data on your mobile phone device. The self-cleaning mechanism is controlled and monitored by the ADI-P controller. The self-cleaning cycle is triggered by an integrated DP switch. The ADI-P controller and mobile app also provide: • DP and flush cycle counters • Alerts – low/high pressures, low battery • Reports and performance history data The Self-Cleaning Process The self-cleaning cycle is initiated by any one of the following conditions: 1. Signal from the DP switch, pre-set at 7 psi (0.5 bar) 2. Time interval parameter set at the controller 3. Manual start, triggered by the ADI-P mobile app (within Bluetooth range) or via electronic controller keypad The flush valve opens to atmosphere creating a strong suction force at the scanner nozzles, effectively removing dirt particles from the screen and discharging them from the filter. Mini Sigma Models Amiad’s Mini Sigma Series consists of the following models: • 2” Mini Sigma for up to 25 m3/h (110 gpm) • 3” Mini Sigma for up to 50 m3/h (220 gpm) • 4” Mini Sigma for up to 80 m3/h (352 gpm) Valves Needed for Mini Sigma Models • 2” Mini Sigma requires a valve on the downstream side - Required - 77-514T08 (2" Gate Valve) • 3” Mini Sigma requires a valve on the downstream side - Required - 77-B6-RL03 (3" Butterfly Valve) • 4” Mini Sigma requires a valve on the downstream side - Required - 77-B6-RL04 (4" Butterfly Valve) *If you already have a valve you do not need to purchase an additional one*- Reliable and durable
- Amiad’s unique suction-scanner cleaning technology
- Modular design with various installation configurations
- Polymeric filter – corrosion free
- Low water and energy consumption
- Compact design and small footprint
- Easy installation and low maintenance
- Ideal for many landscape and agricultural irrigation applications
- Amiad’s innovative and user-friendly ADI-P electronic controller, operated by a mobile app for advanced monitoring capabilities
- 130 MICRON RATING IN STOCK
- Additional sizes and configurations available upon request
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!
No April Fools on this offer. Save another $500. Was $5,000. Now $4,500. Only one to sell!
A power take-off (PTO) is a device that transfers an engine's mechanical power and uses it to power another device. It can be used as a mechanical source to power another mechanical unit, such as a water pump or auger/screw conveyor, that doesn't have its own power supply.
Only one!
- Caprari Power Take Off Pump - Model DMR80 - Serial # 330847 - Manf Date 03/98 (USED)
- Standard Features: • Compact, reliable PTO pump capable of 200 to 800 gpm with corresponding pressures of 193 to 142 psi using 51 to 90 hp • Available with heavy-duty two-wheeled trailer or galvanized three point mount • Designed with an industry leading oil lubricated step-up gearbox (no belts or pulleys) with shafts supported by widely spaced bearings • Easily replaceable packing gland type water seal
- Caprari Power Take Off Pump - Model DMR80 - Serial # 330847 - Manf Date 03/98 (USED)
-
The WER Macerator / Distributor provides a consistent ow of liquid material for a wide range of application methods. The high grade chopping system, and auto-reverse function, ensure an obstruction free, and balanced distribution of your product. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
This assembly comes with the 6" OPTIFLUX 4100 body, flow converter and 30' cable. 6" OPTIFLUX 4100 Body by KROHNE The OPTIFLUX 4100 is an electromagnetic flowmeter (EMF) for a wide range of standard process applications with aggressive and abrasive liquids. It enables reliable flow measurement even under harsh process conditions with temperatures up to +180°C / +356°F, low conductivity (≥5 µS/cm) and solid content (up to 10%). This makes the flowmeter particularly suitable for applications involving corrosive chemicals, sewage and drilling mud or mining sludge. Installation in measurement chambers subject to (constant) flooding is also possible using the optional IP68 / NEMA 6P rated version. Unlike the basic version OPTIFLUX 4050, the OPTIFLUX 4100 features higher accuracy. It comes with a selection of chemically resistant liners and electrodes. Due to its full bore design without moving or intruding parts, there is no pressure loss and no maintenance required. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool. The IFC 100 is a 4-wire electromagnetic signal converter. Combined with the flow sensors of the OPTIFLUX and WATERFLUX series it forms the OPTIFLUX 1100, OPTIFLUX 2100, OPTIFLUX 4100, OPTIFLUX 5100, OPTIFLUX 6100 and WATERFLUX 3100 electromagnetic flowmeters for standard applications with conductive liquids.
Product highlights
- Bi-directional flow measurement over a wide dynamic range (turndown ratio: 1000:1)
- PTFE, PFA, ETFE, hard rubber, soft rubber or PU liner: excellent chemical and abrasion resistance
- Wide range of electrode materials
- Special designs, sizes, inner diameters and liner thicknesses on request
- Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
- Optional external coatings for offshore or subsoil installation (also acc. to ISO 12944)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- Full bore design: No moving parts, no wear, no pressure loss
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
General- Standard applications with clean, aggressive or abrasive liquids
- Conductive fluid chemicals
- Process water, cooling water
- Water injection (high pressure)
- Drilling mud
- Produced water
- Hydrocyclone feed lines
- Chemicals (black liquor, bleach, etc.)
- Irrigation
- Sludge and sewage treatment
6" Electromagnetic Flow Converter by KROHNEThe IFC 100 can be freely combined with KROHNE's entire standard series of electromagnetic flowmeters. The IFC 100 was designed for applications requiring an economical measuring solution with a high level of technology. KROHNE offers its customers a comprehensive application and process diagnostics package far beyond what device diagnostics normally offer. These devices continually measure all decisive parameters and convey information about the condition of the device, the quality of the measured value and potential application errors. The user has a precise overview of the process at any given time –thus fulfilling from A to Z the constantly increasing requirements of an optimal process. With its resistance measurement and noise measurement, the IFC 100 lays the foundation for even more process transparency and reliably reports about:- Gas bubbles and detection of solids
- Changing or excessively low conductivity (e.g. during change of media or empty tube)
- Deposits on electrodes
- Electrode corrosion
- Too high media or ambient temperature
- Compact, remote field, wall-mounted and rack-mounted housing
- With many sensor and process diagnostics for standard requirements
- 4-wire, 4…20 mA, pulse, frequency, status, HART®
Interested in viewing a product selection list of all the KROHNE flow measurement lines?
