-
Heavy-duty seamless stainless steel nipple designed for irrigation and manure plumbing systems, providing long-lasting corrosion resistance and strength compared to brass fittings.
-
The Merit Brass stainless steel tee allows fluid flow branching in irrigation, manure transfer, and agricultural piping systems while providing corrosion-resistant durability.
-
The Merit Brass stainless steel union allows easy disconnection of piping systems for maintenance while providing corrosion resistance in irrigation and manure applications.
-
The WER Tella 400CC Hydraulic Motor (TRI-PUR-000270) is built for demanding manure and slurry pump applications, delivering consistent torque and dependable power under heavy load. Engineered for durability, this 400CC motor withstands high pressures and continuous use in tough agricultural environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!This is a test product only. It is for layout purposes only and not for sale.
-
A Transition Coupler 6" Insert Coupling in irrigation is a fitting used to connect two different types of pipes, usually from one material to another (e.g., polyethylene (PE) to PVC or aluminum). The insert coupling specifically refers to a barbed or ribbed design that allows for a secure grip inside flexible pipe materials. After the Layflat hose has been used it expands and becomes challenging to seal around the barb. This 6” insert is designed to accept the stretched-out lay-flat hose. This coupling can also be used with a new hose with a smaller diameter close to the ends of the couplings. But the diameter is increased towards the center of the coupling so the stretched hose can seal. Here is a link to the recommended clamp.
T-Bolt Hose Clamp – Galvanized
SKU: 72-4650.27 162mm -174mm -
Sale!A valve opening tee is a specialized fitting used in irrigation systems, particularly in agricultural and commercial setups. It combines a standard tee fitting with a valve mechanism. This item is not in stock but is available as a special order and will be shipped directly you. Available in Band & Latch or Ringlock. Questions? Please call us at 517-458-974
-
Sale!Weld-on adapter rings are permanent transition components used in manure distribution and are designed to connect to a female shug coupler.
Weld-On Adapter Rings (Manure Management Applications)
In manure management systems, weld-on adapter rings are heavy-duty transition fittings used to convert plain-end pipe into a male Shug connection capable of handling abrasive, high-volume manure flow.
They are a standard component in dragline systems, pump stations, and transfer manifolds, where strength, serviceability, and leak prevention are critical.
-
The WER 10 Tooth Drive Gear Assembly (160-TRI-ASSM-000061) is engineered for reliable, efficient power transfer in slurry and manure pump systems. With its precision-machined 10-tooth design, this gear assembly ensures smooth operation, proper alignment, and consistent torque delivery. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
The WER 14 Tooth Drive Gear Assembly (160-TRI-ASSM-000028) is built for dependable power transfer in slurry and manure pump systems. Featuring a precision-machined 14-tooth design, this gear assembly delivers smooth torque transmission, reliable alignment, and efficient operation under heavy-duty conditions. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
REDUCE COSTLY DOWNTIME The WER Inline Chopper’s primary purpose is to prevent obstructionsfrom entering the drag line system. This ensures greater productivity by reducing blockages and eliminating unnecessary pump repair.
Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com. -
The WER Distributor Drive Flange (160-TRI-MAN-000292) is engineered for strength, durability, and precise fit in slurry and manure pump distributor assemblies. Built from high-quality materials, this drive flange transfers power efficiently while maintaining alignment and stability in demanding agricultural environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
The WER Distributor Seal Housing (160-TRI-MAN-001981-REV-1) is designed to provide a secure, leak-resistant fit for slurry and manure pump distributor assemblies. Engineered from durable, high-quality materials, this housing protects critical components from slurry intrusion while maintaining proper seal alignment and system efficiency. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
#7 Berkeley Diaphragm - Height 2 5/8" (bottom to top of lip) x 6 3/4" Outside Diameter Top (outside of lip to outside of lip) x 5 1/2" Diameter Base Bottom (outside of lip to outside of lip).
-
Sale!* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F.
-
1" Insert x 3/4" MPT Adapter is used to couple a 1" rigid hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1" O.D. (outside diameter) opening to a 3/4" O.D. Previous SKU: G-00171 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order one at a time. If you are ordering two or more rolls, please call 517-458-9741 for other shipping options.
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
Previous SKU: G-00171This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!1" Stem w/ Solid Yoke for 8" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer!
-
Sale!10.25" Female Weld on Coupler HF Brand Name: Metal 360
-
Sale!10.25" HF HD Ringlock Clamp Brand Name: Metal 360
For an overview of the different types of clamps available visit the following video:
Clamps Explained!
-
Sale!10.25" Male Weld on End Flare HF Brand Name: Metal 360
-
Sale!1/2" - 3/4" - 1" Sizes of 100' - Clear Vinyl Tubing Available for purchase
-
Sale!2" Flange x FPT, Banjo 2" Full Port Flange x FML Pipe Thread
-
Sale!* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
The right air hose can help simplify a lot of chores in your operation. What should you be looking for in a quality air hose? CLICK HERE to learn about the 10 things to look for when buying air hoses for commercial use. Mandals Mantex is a lightweight, yet rugged and hard-wearing hose. It is made from a blend of nitrile rubber and PVC, with an added UV barrier to prevent damage from UV radiation. Mandals Mantex HP is a world-class agricultural lay flat air hose designed for compressed air at high working pressures, while still offering a lightweight solution that is easy to deploy and store. An ideal agricultural air hose!
- Mandals Mantex Air Hose with Dixon GJ Boss Female Coupling with Polymer Seat
- Plated Iron
- .55lbs/ft
- 600 PSI Pressure Rating
- 2535 Burst Pressure Rating
- Wall Thickness .17in
- Tensile Strength 31,700 lbs
-
Sale!* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Sale!Easy On/Off hose connections. Positive seals. Quick & easy assembly. Maximum operating pressure 300 PSI.
