-
Sale!Gasket For Cam Lever Coupling EPDM Replacement Gasket for Banjo's Camlocks *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Pierce couplers. Made of long lasting, durable rubber. Fits Pierce Couplers Check out all of our commercial grade irrigation gaskets.
-
Sale!Clamp Lock Bolt 1/4" by 3 1/2" Item 8 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Felton couplers. Made of long lasting, durable rubber. Fits Felton couplers A Felton gasket is a specialized type of gasket used in irrigation systems to ensure a watertight seal between various components, such as pipes, valves, and fittings. These gaskets are typically made from durable rubber or similar materials to withstand the pressures and environmental conditions found in irrigation systems. The name "Felton gasket" is derived from the company or manufacturer that originally produced or popularized this type of gasket. It is common in various industries for certain products to be named after the company that first introduced or became widely associated with them. In this case, the Felton gasket likely got its name from Felton, a company recognized for its contributions to the irrigation and plumbing sectors. Felton gaskets are valued in irrigation for their reliability and effectiveness in preventing leaks, contributing to the efficiency and sustainability of irrigation practices. Their design and material composition make them particularly suited to the demands of agricultural water management. Check out all of our commercial grade irrigation gaskets.
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Wade couplers. Made of long lasting, durable rubber. Fits Wade Couplers Check out all of our commercial grade irrigation gaskets.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!Male Thread x Hose Barb. Made of heavy-duty and durable polypropylene. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
-
Sale!Roll Pin (Handle) 3" to 6" Item 2 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
Sale!Roll Pin (Handle) 8" Item 2 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Available in: 1" & 2" sizes. Additional sizes available by special order.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C). (Size) x (By/Reduction) Red Bushing - Spigot x Socket Example: 3/4" x 1/2" Red Bushing - Spigot x Socket
-
Superior Choice for Use with Polyethylene Pipe
Spears® PVC Insert Fittings are designed for use with either ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. Chemical and corrosion resistant, rigid PVC barbed inserts provide excellent grip with polyethylene materials.
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1).
The maximum recommended service temperature of PVC products is 140° F (60° C).
Previous SKU: G-00181
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Rainway couplers. Made of long lasting, durable rubber. Fits Rainway Couplers Check out all of our commercial grade irrigation gaskets.
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Brand Name: Jain
-
Sale!Poly Nipple. Made of heavy-duty and durable polypropylene.
- Glass reinforced polypropylene.
- Heavy Duty (Schedule 80).
- Lightweight and excellent strength.
- National Pipe Threads.
- Excellent chemical resistance.
- Pressure to 150 P.S.I. at 70 degrees F.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
90 Degree Street Elbow Female Pipe Thread x Male Pipe Thread, SCH 40 PVC (3 Sizes Available - See Options)
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Gheen couplers. Made of long lasting, durable rubber. Fits Gheen couplers Check out all of our commercial grade irrigation gaskets.
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Shur-Rane couplers. Made of long lasting, durable rubber. Fits Shur-Rane Couplers Check out all of our commercial grade irrigation gaskets.
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Western couplers. Made of long lasting, durable rubber. Fits Western Couplers Check out all of our commercial grade irrigation gaskets.
-
Sale!Flange Gasket (1/8" Red Rubber Full Face Gasket) We also carry steel welding flanges and aluminum welding flanges. Brand Name: Pierce
-
Sale!
Very easy to install tubing over single barb
Positive stop to assure tubing is fully installed
Low effort, square thread drive ring quickly locks tubing in place — no tools needed
Barb design ensures tubing will not slip out or blow off at high pressure and temperature
Each fitting will accommodate a wide range of hose diameter and wall thickness
Working pressure: 60 psi
To connect Total CV and polyethylene supply tubing
Fits a wide range of tubing ID and wall thicknesses (see chart below)
Brand Names: JainFitting Series # Acceptable I.D. (Inches) Acceptable I.D.(Millimeters) Acceptable Wall Thickness (Inches) Acceptable Wall Thickness (Millimeters) 55 0.520 to 0.620 13.2 to 15.7 0.045 to 0.055 1.14 to 1.40 70 0.665 to 0.765 16.9 to 19.4 0.035 to 0.055 0.89 to 1.40 80 0.790 to 0.845 20.1 to 21.5 0.045 to 0.065 1.14 to 1.65 100 1.035 to 1.075 26.3 to 27.3 0.062 to 0.075 1.57 to 1.91
Irritec 
-
Sale!Water your garden with the touch of a button. Adjustable water flow rate. Comes in 4 colors - Blue, red, black and green. If you have a preference, add a note to your order and we will do our best to accommodate you.
-
The WER 3/8-16 x 1 HHC Stainless w/1w – Knife Arm Fastener (TSF-PUR-000166) is engineered to securely mount knife arms in WER chopper assemblies. Manufactured from high-quality stainless steel, this fastener provides exceptional strength and resistance to corrosion, making it ideal for harsh manure and slurry pump environments. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Sale!Tape Loc Fittings have a special cap provided to “lock” the fitting to the thin wall thickness drip tape. The positive locking design seals tight for leak-proof joints. Tape Loc Fittings are reusable. The drip tape may be removed and reinstalled. Made of polypropylene for strength, durability and chemical resistance to beyond normal agricultural and landscape applications. UV resistant. Elbow fitting to be used with 5/8" Drip Tape. Elbows allow you to make a sharp turn which the drip tape itself is not capable of making. Consists of commercial grade, UV resistant plastic. Requires NO glue or tools for installation. To install, simply turn sleeve counter-clockwise, slip tubing over barb, and turn sleeve clockwise to hand tighten for a secure fit. Previous SKU: G-00153 Brand Names: Jain Irritec
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Champion couplers. Made of long lasting, durable rubber. Fits Champion Couplers Check out all of our commercial grade irrigation gaskets.
-
Sale!This is for the screen bolt and nut for a foot valve. You will need to know the size of your foot valve before you can order this. **These are ordered by the size of the foot valve and not the length of the bolt** Questions? Call us at 517-458-9741 or email us at info@triplekirrigation.com. *Be sure to check out our full line of Sure-Flo Fittings & Replacement Parts!* Brand Name: Sure-Flo Fittings
-
Pipe Plugs are part of a full line of Die Cast Plugs, Bushings, Bell Reducers, Sleeve Couplers and Street Reducers manufactured by IACO (Irrigation Accessories Company). Precision machine threaded to NPT standards. Made of a Die Cast Zamac alloy that will not seize, rust or gall. Field tested and proven for over 50 years. Brand: IACO
