-
Mushroom Drain A mushroom drain is a type of surface drainage fitting that resembles the shape of a mushroom. It is typically installed at ground level in fields, gardens, or areas prone to water accumulation. The drain is designed to collect excess surface water and direct it into an underground drainage system, helping to prevent waterlogging and maintain optimal soil conditions for crops. The mushroom-shaped cap allows water to flow in while preventing debris, soil, and other materials from clogging the drain. This ensures efficient water runoff management, which is crucial for protecting crops from excess moisture that can lead to root rot, soil erosion, and reduced plant health. Mushroom drains are essential components in farm drainage systems, promoting better water control and contributing to healthier, more productive farmland.
-
Bauer Type "F" Style Galvanized Female Socket with Lever x Hose Barb The Steel Bauer Type "F" Style Galvanized Female Socket with Lever x Hose Barb is typically used with the Bauer Type “F” Style Galvanized Male Ring x Hose Barb. Please contact us for more information.
-
Sale!A backwash pressure of 45 PSI is required (nozzles on two sides) How these strainers work: A small amount of water is returned from the discharge side of the pump to the strainer. Inside, two special nozzles spray against the screen, causing it to revolve. Any debris (e.g., algae, aquatic plants, or leaves) attracted to the screen is blasted off every half revolution. Strainers operate in any position, and require only 35 psi to operate. Eliminate Hot Spots: These strainers are designed with internal PVC suction tube with smaller holes at the top, (nearer to the pump), and larger holes at the bottom (farther from the pump) to even the draw or suction across the entire height of the cylinder screen. This prevents water from flowing in harder at the top of the screen, which leads to “hot spots.” (Clogging). Our screens utilize the full surface area for extremely consistent through-screen velocity, which maximizes the effectiveness of the cleaning nozzles. Watch our video: Strainers Explained
-
Sale!Note this Galvanized Steel riser is IPS (Iron Pipe Sizing) so a 6″ Riser measures 6 5/8″ Outer Diameter. If you need PIP (Pressure Irrigation Pipe) call us at 517-458-9741 and we can order it for you! Manufacturer warranty included. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Galvanized Steel Z Pipe Short Base Underground Riser: Female or Male Top galvanized steel underground riser with manufacturer warranty. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
End cap without air relief and end cap with 2" air relief. Galvanized steel Various sizes all with 42" Length Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order one at a time. If you are ordering two or more rolls, please call 517-458-9741 for other shipping options.
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
Previous SKU: G-00171This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Durable T Pipe for underground irrigation systems. Simple and fast connections. Multiple sizes available. Please call and speak with one of our Sales Specialist about Size, Price and Availability.
-
Durable: Nitrile rubber cover increases resistance to oil, fuel, most chemicals and petrochemicals; and stands up to ozone and oxidation. Rugged: 100% high tenacity yarn, extruded with thru-the-weave nitrile rubber construction for strength and greater flow. Service Worthy: Light weight allows for fast deployment and retrieval, saving time and money. High-Performance: Rubber construction delivers maximum durability, flexibility and service life. Tested: Performance rated at -5°F to 200° F (-20°C to 93°C). Certified: Manufactured within the scope of our ISO-9001: 2015 certified quality assurance system. AG FEEDER HOSE LAY-FLAT NITRILE RUBBER HOSE
CONSTRUCTION Extruded Nitrile Cover/Liner Polyester/Nylon Reinforcement
TEMPERATURE RANGE -5° to 200°F (-20° to 93°C)
STANDARD LENGTH 660' (200M) HOSE COLORS - Black
AG Data Sheet DownloadFor pricing and availability call in today and speak with one of our Sales Associates. -
Hose Construction – 100% high tenacity yarn, extruded with thru-the-weave polyurethane construction. Chemical Resistance – capable of withstanding exposure to most hydro-carbons, gasoline, oils, alkalis and grease with no effect on the performance of the hose. Ozone Resistance – shows no visible signs of cracking of the liner or cover when subjected to testing in accordance with ASTM D1149-64, 100 PPHM/122°F/70 hours Abrasion Resistance – Abrasion resistance 5X that of conventional rubber hose, 300,000 cycles on a Taber abrasion tester without exposure of the jacket. Designed for maximum service life and low operating cost. Fast deployment and retrieval – saving time and money Easy to store and transport Standard length – 660’ (200M), shorter lengths available Color – Brown, Blaze Orange Manufactured within ISO-9001: 2015 certified quality assurance system GROW YOUR OPERATIONS WITH ALL-AMERICAN QUALITY AGRICULTURAL HOSES Catering to generations of America’s growers, dealers and farmers, All-American Hose proudly offers a full line of hoses and couplings that are built to efficiently manage agri-business operations. Whether you need sludge injection hoses, feeder main lines or irrigation lines, they engineer and build premium quality hoses that are flexible, lightweight and ultra-durable to handle the job in any condition—from freeze/thaw cycles to extreme heat. To order please call in speak to one of our Sales Associates for pricing and availability.
-
Dosatron fertilizer injectors can be used in a variety of installations and configurations. Mount them on booms or benches. Increase your flow with parallel installations, or inject multiple nutrients with series installations. It’s all up to you! Examples
Aquaponics
Indoor Farming and Agriculture
Stacked Farming
Urban Gardening and Farming
Drain-to-Waste- Connection Size: 3/4" NPT
- Percentage Range: 0.2 to 2%
- Unit Weight: 6 lbs
- Ounces Per Gallon Range: 0.256 to 2.560
- Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
- Pressure: 4.3 to 85 PSI
- Dimensions: 19 1/8" x 6 5/16"
- Ratio Range: 1:500 to 1:50
-
Weld-on High Pressure Ringlock. Heat treated, heavy duty cast aluminum coupler. Recommended when high pressures are required. Brand Name: Travis Pattern
-
This assembly comes with the 6" OPTIFLUX 4100 body, flow converter and 30' cable. 6" OPTIFLUX 4100 Body by KROHNE The OPTIFLUX 4100 is an electromagnetic flowmeter (EMF) for a wide range of standard process applications with aggressive and abrasive liquids. It enables reliable flow measurement even under harsh process conditions with temperatures up to +180°C / +356°F, low conductivity (≥5 µS/cm) and solid content (up to 10%). This makes the flowmeter particularly suitable for applications involving corrosive chemicals, sewage and drilling mud or mining sludge. Installation in measurement chambers subject to (constant) flooding is also possible using the optional IP68 / NEMA 6P rated version. Unlike the basic version OPTIFLUX 4050, the OPTIFLUX 4100 features higher accuracy. It comes with a selection of chemically resistant liners and electrodes. Due to its full bore design without moving or intruding parts, there is no pressure loss and no maintenance required. A full on-site verification of the flowmeter without process interruption can be carried out using the OPTICHECK service tool. The IFC 100 is a 4-wire electromagnetic signal converter. Combined with the flow sensors of the OPTIFLUX and WATERFLUX series it forms the OPTIFLUX 1100, OPTIFLUX 2100, OPTIFLUX 4100, OPTIFLUX 5100, OPTIFLUX 6100 and WATERFLUX 3100 electromagnetic flowmeters for standard applications with conductive liquids.
Product highlights
- Bi-directional flow measurement over a wide dynamic range (turndown ratio: 1000:1)
- PTFE, PFA, ETFE, hard rubber, soft rubber or PU liner: excellent chemical and abrasion resistance
- Wide range of electrode materials
- Special designs, sizes, inner diameters and liner thicknesses on request
- Standard measurement accuracy: ±0.3% or ±1mm/s of measured value (MV)
- Optional external coatings for offshore or subsoil installation (also acc. to ISO 12944)
- Diagnostics incl. conductivity, electrode error, ambient and process temperature etc.
- Full bore design: No moving parts, no wear, no pressure loss
- On-site verification of flowmeter with OPTICHECK service tool
Typical applications
General- Standard applications with clean, aggressive or abrasive liquids
- Conductive fluid chemicals
- Process water, cooling water
- Water injection (high pressure)
- Drilling mud
- Produced water
- Hydrocyclone feed lines
- Chemicals (black liquor, bleach, etc.)
- Irrigation
- Sludge and sewage treatment
6" Electromagnetic Flow Converter by KROHNEThe IFC 100 can be freely combined with KROHNE's entire standard series of electromagnetic flowmeters. The IFC 100 was designed for applications requiring an economical measuring solution with a high level of technology. KROHNE offers its customers a comprehensive application and process diagnostics package far beyond what device diagnostics normally offer. These devices continually measure all decisive parameters and convey information about the condition of the device, the quality of the measured value and potential application errors. The user has a precise overview of the process at any given time –thus fulfilling from A to Z the constantly increasing requirements of an optimal process. With its resistance measurement and noise measurement, the IFC 100 lays the foundation for even more process transparency and reliably reports about:- Gas bubbles and detection of solids
- Changing or excessively low conductivity (e.g. during change of media or empty tube)
- Deposits on electrodes
- Electrode corrosion
- Too high media or ambient temperature
- Compact, remote field, wall-mounted and rack-mounted housing
- With many sensor and process diagnostics for standard requirements
- 4-wire, 4…20 mA, pulse, frequency, status, HART®
Interested in viewing a product selection list of all the KROHNE flow measurement lines? -
Venturi Fertilizer Injector Assembly for 1 1/2", 2", 3" or 4" Line. Please call us for additional sizes and/or options. A Venturi Fertilizer Injector Assembly is a device used in irrigation systems to introduce liquid fertilizers, pesticides, or other water-soluble solutions into the irrigation water. It operates on the Venturi effect, where a reduction in water pressure creates suction, allowing the injector to draw the fertilizer solution into the irrigation line without requiring an external power source.
Key Features:
- Venturi Injector Mechanism:
- Based on the Venturi principle, the injector creates a pressure differential within the water flow, generating suction to pull fertilizer or additives into the system.
- Efficiently mixes the solution with the irrigation water for even distribution.
- Complete Assembly:
- Typically includes a Venturi injector, a filter to protect against debris, a suction line for drawing the fertilizer, and control valves to regulate water flow and solution injection rates.
- Some assemblies may also include flow meters or pressure gauges for precision control.
- Durable Construction:
- Made from corrosion-resistant materials like plastic, brass, or stainless steel to withstand exposure to chemicals and harsh irrigation environments.
- Compatibility:
- Works with various irrigation systems, including drip, sprinkler, and pivot systems.
- Compatible with most water-soluble fertilizers and liquid additives.
- Energy-Free Operation:
- Requires no electricity or additional power sources, relying solely on the water pressure in the system.
How It Works:
- Water Flow:
- Pressurized water enters the Venturi injector, creating a constriction that reduces pressure and increases velocity.
- Suction:
- The pressure drop generates suction, drawing the fertilizer or solution through the suction line.
- Mixing:
- The solution is mixed with the water in the injector and carried through the irrigation system.
- Delivery:
- Nutrient-enriched water is distributed to plants via the irrigation network.
Benefits:
- Efficient Fertilizer Delivery:
- Ensures nutrients are delivered directly to the plant root zone, enhancing absorption and minimizing waste.
- Cost-Effective:
- Operates without the need for pumps or external power, reducing operational costs.
- Uniform Distribution:
- Provides consistent and even mixing of fertilizer with irrigation water for balanced plant growth.
- Simple and Reliable:
- Easy to install, operate, and maintain, with few moving parts to break or wear out.
- Water and Nutrient Conservation:
- Optimizes resource use and reduces environmental impact by preventing over-fertilization and runoff.
Common Applications:
- Drip Irrigation:
- Ideal for delivering precise nutrients directly to plant roots.
- Greenhouses:
- Supplies exact formulations of fertilizers and additives for controlled plant growth.
- Agricultural Crops:
- Supports even fertilization over large fields, improving yields.
- Horticulture and Landscaping:
- Feeds plants, lawns, and ornamental gardens efficiently.
Differences Between a Venturi Injector and a Venturi Fertilizer Injector Assembly:
- The Venturi Injector is the core device, while the Venturi Fertilizer Injector Assembly includes additional components such as filters, valves, and suction lines for a complete, ready-to-use system.
In summary, a Venturi Fertilizer Injector Assembly is a practical, energy-efficient tool for integrating liquid fertilizers and additives into irrigation systems. Its simplicity, cost-effectiveness, and precise nutrient delivery make it invaluable for modern agriculture, landscaping, and greenhouse operations. - Venturi Injector Mechanism:
-
1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer!
-
Sale!
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
-
Sale!Special Pricing - 55% Off Retail While Supplies Last!!! Plastic Spin Clean Y-Filter
- No moving parts
- Unique Spin Clean® action keeps the screen clean during operation
- Engineered plastic construction is light in weight and resistant to corrosion and injected chemicals
- Two piece threaded housing with O-ring seal for easy screen access and maintenance
- Vinyl screen collars prevent debris from by-passing filter area
- Available with ball valve for flushing debris basin
- Only 5-8 psi pressure loss required across filter to ensure best self cleaning action
-
Filtration is the first line of defense in the irrigation chain, protecting your system and ensuring high production quality and profitable yields.
How the Mini Sigma Filter Works How to Install the Mini Sigma Annual Maintenance Kit The Filtration Process Raw water enters through the filter inlet and passes through the screen. Clean water flows through the filter outlet. The gradual dirt buildup on the screen’s inner surface causes a filter cake to develop, creating an increase in the pressure differential across the filter system. A differential pressure (DP) switch senses the pressure differential and when it reaches a pre-set level, the self-cleaning process begins. The Control System - Amiad’s NEW ADI-P Controller Amiad’s ADI-P controller offers a one-of-a-kind monitoring and control functionality. The controller interacts with Amiad’s advanced, user-friendly app that provides detailed filtration performance data on your mobile phone device. The self-cleaning mechanism is controlled and monitored by the ADI-P controller. The self-cleaning cycle is triggered by an integrated DP switch. The ADI-P controller and mobile app also provide: • DP and flush cycle counters • Alerts – low/high pressures, low battery • Reports and performance history data The Self-Cleaning Process The self-cleaning cycle is initiated by any one of the following conditions: 1. Signal from the DP switch, pre-set at 7 psi (0.5 bar) 2. Time interval parameter set at the controller 3. Manual start, triggered by the ADI-P mobile app (within Bluetooth range) or via electronic controller keypad The flush valve opens to atmosphere creating a strong suction force at the scanner nozzles, effectively removing dirt particles from the screen and discharging them from the filter. Mini Sigma Models Amiad’s Mini Sigma Series consists of the following models: • 2” Mini Sigma for up to 25 m3/h (110 gpm) • 3” Mini Sigma for up to 50 m3/h (220 gpm) • 4” Mini Sigma for up to 80 m3/h (352 gpm) Valves Needed for Mini Sigma Models • 2” Mini Sigma requires a valve on the downstream side - Required - 77-514T08 (2" Gate Valve) • 3” Mini Sigma requires a valve on the downstream side - Required - 77-B6-RL03 (3" Butterfly Valve) • 4” Mini Sigma requires a valve on the downstream side - Required - 77-B6-RL04 (4" Butterfly Valve) *If you already have a valve you do not need to purchase an additional one*- Reliable and durable
- Amiad’s unique suction-scanner cleaning technology
- Modular design with various installation configurations
- Polymeric filter – corrosion free
- Low water and energy consumption
- Compact design and small footprint
- Easy installation and low maintenance
- Ideal for many landscape and agricultural irrigation applications
- Amiad’s innovative and user-friendly ADI-P electronic controller, operated by a mobile app for advanced monitoring capabilities
- 130 MICRON RATING IN STOCK
- Additional sizes and configurations available upon request
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!General Information: With their Screen and Disc elements Amiad TAGLINE filters are made for wide range of irrigation applications. The TAGLINE filters are available in various filtration degrees to cover the needs of modern irrigation systems. TAGLINE filters are made from high quality engineered plastic materials providing excellent mechanical strength, durability and ease of installation. Amiad’s TAGLINE filters are easy to maintain; no tools are needed for extracting the filter element from the filter housing for rinsing. Filter Elements: Covering a wide range of flowrates, various filtration degrees and a variety of irrigation applications, Amiad supplies two types of filter elements for its TAGLINE series: Screen Elements and Disc Elements (discs are by special order only).
- Easy maintenance and minimal manual cleaning required
- Algae growth prevention & corrosion resistance
- High-quality mechanical strength and corrosion resistance
- Low pressure loss
- Interchangeable filter elements for a wide range of flow rates, filtration degrees and irrigation applications
- Additional sizes available upon request
-
Sale!Bauer Type End Cap Socket / Female End caps and plugs may be used for several purposes, such as closing off the end of a pipeline, capping unused branches on T's and Y's, vacuum/pressure testing of pumps or pipe, or capping pump fittings during transport. For easier coupling (especially of larger sizes) lubricate new Wil-loc O-rings. This will allow the ball to seat into the socket easier during first time usage. Precision crafted from galvanized steel. Provides long life and lower operating cost. Be sure to check out our full line of Bauer type fittings!
-
Sale!Bauer Type End Plug Ball / Male End caps and plugs may be used for several purposes, such as closing off the end of a pipeline, capping unused branches on T's and Y's, vacuum/pressure testing of pumps or pipe, or capping pump fittings during transport. For easier coupling (especially of larger sizes) lubricate new Wil-loc O-rings. This will allow the ball to seat into the socket easier during first time usage. Precision crafted from galvanized steel. Provides long life and lower operating cost. Be sure to check out our full line of Bauer type fittings!
-
Sale!PC Emitter (CNL Feature) is an emitter with a separate barb for inlet and outlet installations. PC stands for Pressure Compensating while CNL stands for Closed No Leak. These emitters open at 5.5 PSI and close at 4.3 PSI. Sold in packs of 100 each. These Emitters (Pressure Compensating) deliver a consistent output of water, even with changes in pressure due to long runs of drip tubing or elevation changes, and come in .5 GPH (Blue), 1.0 GPH (Green), and 2.0 GPH (Red) sizes. This emitter may be inserted in 1/2" supply tubing by using a 1/4" punch tool or installed at the end of 1/4" distribution tubing or 1/4" dripper line due to its 1/4" barb (also known as a 250 barb) on one end. An emitter like this allows you to get water to exact locations unlike drip tubing which has built-in emitters spaced evenly in the tubing. For example, you could have a 1/2" distribution tubing running through your landscape bed. If a planting is near this tubing, you can insert an emitter near the planting. Another option is to install a 1/4" insert coupler in the 1/2" distribution tubing to connect a 1/4" dripper line to it. This line can then be run in and around plantings. At the end of the dripper line, install an emitter. This will allow you to irrigate the area. There are multiple options for installation using dripper line, distribution tubing and emitters. This is a pack of 100 emitters. Product Features
- CNL Feature Prevents Refill and Siphoning (Opens at 5.7 Psi, Closes at 4.3 Psi)
- Superior Clog Resistance
- Fully Pressure Compensating (10-65 Psi)
- Silicone Diaphragm Offers Precision and Long Life
- Large Turbulent Flow Path
- Made With UV Resistant Materials
- Color Coded for Ease of Identification
- Compact Size
- Low CV’s of 2.5% or Less
- Versatile Applications: Nursery, Greenhouse, Vineyard and Landscape
- Non-CNL Version Also Available (Please contact us for more details)
Click here to view Irritec's product brochure.
Brand Name: Irritec
-
Drip Irrigation Blank Tape Spool This spool has a 24" Diameter and 17" Height (Black end to Black End); the inside spool has a 5" Diameter and 15" Height (White end to White end). Drip Irrigation Blank Tape Spool has been designed to roll your longs runs of drip tape back onto at the end of the season for easy storage and future usage. The following season your drip tape will be ready for re-installation. Some assembly required. In stock and ready to UPS same day! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Sale!A 2″ Filter Plastic with Flush Valve is an irrigation component designed to filter out debris and particulate matter from the water supply before it enters the irrigation system. The 2-inch specification refers to the diameter of the inlet and outlet connections, making it suitable for moderate to large-scale irrigation setups. This type of filter is typically made from durable plastic, which provides resistance to corrosion and ensures long-term performance in outdoor conditions. The flush valve feature allows for easy cleaning and maintenance of the filter by enabling users to flush out accumulated debris without disassembling the entire unit. This helps maintain optimal water flow and prevents clogs or damage to downstream equipment like drip lines, sprinklers, or emitters. In farming and gardening, using a filter with a flush valve is essential for protecting the irrigation system, ensuring consistent water delivery, and extending the lifespan of the system components.
-
6" Doda Locking Ring - Black - 150mm This Locking Ring does not include the male ball. The 6" Weld On Male Ball is sold separately. Brand Name: Doda
-
6" Doda Weld On Male Ball - 150mm This Weld On Male Ball does not include the ring. The 6" Locking Ring is sold separately. Brand Name: Doda
-
6" Doda 2-Hook Coupler with O-Ring - 150mm Brand Name: Doda
-
Hose Swivel (3/4" FHT x 3/4" FPT) 3/4″ Hose Swivel attaches to a hose bib, faucet, spigot, hydrant, garden hose or hose threaded parts (like filters and pressure regulators) and accepts fittings with 3/4″ male hose threads (MHT). Previous SKU: G-00172
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Backflow Preventer (3/4" FHT x 3/4" MHT) A backflow preventer is the effective and economical way to prevent the risk of back-flow contamination from outdoor hose bibb connected devices. It comes with a 3/4″ FHT inlet and a 3/4″ MHT outlet. No Teflon tape is required since both ends are hose thread. A standard hose washer is included to make a water tight seal. For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Sale!Poly Bulkhead Tank Flange Gasket EPDM gasket. Brand Name: Banjo
-
Sale!Mounting Bracket for Banjo Poly Ball Valve - We currently offer two styles of brackets...Straight and 90 Degrees. Both of these mounting brackets fit the following Banjo Valves: V125FP, V150 and V200. *Remember to check out our full line of Banjo Fittings!*
Brand Name: Banjo -
Sale!1" 45 Degree Poly Elbow Female Thread. Made of heavy-duty and durable polypropylene. Glass reinforced polypropylene. Heavy Duty (Schedule 80). Lightweight and excellent strength. National Pipe Threads. Excellent chemical resistance. Pressure to 150 P.S.I. at 70 degrees F. *Remember to check out our full line of Banjo Fittings! Brand Name: Banjo
