- Optionally fitted with Cornell's patented Run-Dry and Redi-Prime systems.
- Outfitted with an array of different impeller options and cutters.
- Can be outfitted with standard packing or mechanical seals.
- Available in frame mount, engine mount, or close coupled with an electric motor.
- Pump discharges can be oriented to customer specifications.
- Larger models feature a "Double Volute"
- Suction inlets are smooth and contoured for improved hydraulic performance.
-
Cornell irrigation and manure handling pumps are constructed with top quality materials. Made up of Cast Iron, bronze fitted, or all iron construction, Cornell's pumps meet or exceed optimum efficiency standards for centrifugal pumps. Other options are available for pumps required to move abrasive or caustic materials. Standard features include balanced impellers, heavy duty shafts, replaceable shaft sleeves, and replaceable wear rings or wear plates. In addition to the bulletproof design of their standard pumps, Cornell's legacy manure pumps are specifically designed for coarse abrasive slurry applications such as manure, sand, and gravel. Additionally, Cornell Pumps:
-
MECHANICAL SEAL FOR 6NHTB & 4NHTB If you are looking for additional replacement parts for your Cornell Pump, please have the Model #, Serial # and/or TB # and SMP# handy. This will help us identify the proper parts for you.
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!What do you get when you marry a 10" “A” Style Female Weld-On Socket with a 10" x 8" Black Concentic Cone and an 8" Hose Barb? I'm not sure, but here is a picture!
-
THE PROTEK HAND DIAPHRAGM PRIMER #5 contains a rubber diaphragm working in an aluminum chamber. A levered handle attached to it by a connecting rod actuates the diaphragm. Air is drawn into the chamber through a suction valve on the up-stroke and discharged through a discharge valve on the down-stroke. The diaphragm is of molded rubber, and it is extremely tough and long wearing. A rubber air discharge valve, built into the diaphragm, provides a positive seal. DIMENSIONS: 2 1/4" Height (Bottom to top lip) x 5 3/4" Outside Top Diameter (Outside of lip to outside of lip) x 4 1/2" Base Bottom Diameter (Outside of lip to outside of lip) Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
THIS DIAPHRAGM IS FOR A PROTEK HAND DIAPHRAGM PRIMER #7. This is rubber diaphragm that works in an aluminum chamber. A levered handle attached to it by a connecting rod actuates the diaphragm. Air is drawn into the chamber through a suction valve on the up-stroke and discharged through a discharge valve on the down-stroke. The diaphragm is of molded rubber, and it is extremely tough and long wearing. A rubber air discharge valve, built into the diaphragm, provides a positive seal. Dimensions: Height 2" (bottom to top lip) x 7 3/4" Outside Top Diameter (outside of lip to outside of lip) x 6 1/4" Base Bottom Diameter (outside of lip to outside of lip). Be sure to check out our full line of items for Protek Primers and replacement parts! Most parts are in stock and may ship the same day!
-
THE PROTEK HAND DIAPHRAGM PRIMER #9 contains a rubber diaphragm working in an aluminum chamber. A levered handle attached to it by a connecting rod actuates the diaphragm. Air is drawn into the chamber through a suction valve on the up-stroke and discharged through a discharge valve on the down-stroke. The diaphragm is of molded rubber, and it is extremely tough and long wearing. A rubber air discharge valve, built into the diaphragm, provides a positive seal. DIMENSIONS: 2 1/4" Height (Bottom to top lip) x 9 3/4" Outside Top Diameter (Outside of lip to outside of lip) x 8" Base Bottom Diameter (Outside of lip to outside of lip) Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Protek hand primer Upper & Lower Plates for #5. Made out of a heavy-duty galvanized steel. Two pieces needed for primer diaphragm. Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Diaphragm without plate for Wade Primer Made out of durable rubber. Most parts are in stock and may ship the same day!
-
Sale!Discharge Adapter (Male Pipe Thread X Band & Latch). Gasket Included. Easy transition from your pump to your solid set irrigation system. *Be sure to check out our full line of Band and Latch Fittings!* Brand Name: Pierce
-
Sale!Male Pipe Thread X Female Band and Latch OR Ringlock Pump Discharge Adapter. This fitting is designed to be used for either B&L or Ringlock since the latch is set back from the end of the female end to allow for the Ringlock Clamp to close tightly. Roundback Gasket Included. Easy transition from your pump to your solid set irrigation system. *Be sure to check out our full line of Band and Latch and/or Ringlock Fittings!* Brand Name: Pierce
-
Dosatron fertilizer injectors can be used in a variety of installations and configurations. Mount them on booms or benches. Increase your flow with parallel installations, or inject multiple nutrients with series installations. It’s all up to you! Examples
Aquaponics
Indoor Farming and Agriculture
Stacked Farming
Urban Gardening and Farming
Drain-to-Waste- Connection Size: 3/4" NPT
- Percentage Range: 0.2 to 2%
- Unit Weight: 6 lbs
- Ounces Per Gallon Range: 0.256 to 2.560
- Flow: 0.05 to 14 GPM (0.19 to 50 LPM)
- Pressure: 4.3 to 85 PSI
- Dimensions: 19 1/8" x 6 5/16"
- Ratio Range: 1:500 to 1:50
-
This Double Acting Air Cylinder is an accessory for 4", 6" or 8" MZ Brass Slide Valve.
-
Sale!Double bolt, zinc plated, ductile iron hose clamps. Great for higher pressure hoses and connections. Designed to be used with hose barbs with a raised bead. The inside edge of the clamp is concave to meet the raised part of the hose barb providing a secure connection. Great for layflat discharge and mainline hoses!
For an overview of the different types of clamps available visit the following video:
Clamps Explained!
Brand Name: Kuriyama -
Drain Valve for all Protek hand primers (#5, #7 & #9). Made out of a lightweight, durable brass. Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Drip Irrigation Blank Tape Spool This spool has a 24" Diameter and 17" Height (Black end to Black End); the inside spool has a 5" Diameter and 15" Height (White end to White end). Drip Irrigation Blank Tape Spool has been designed to roll your longs runs of drip tape back onto at the end of the season for easy storage and future usage. The following season your drip tape will be ready for re-installation. Some assembly required. In stock and ready to UPS same day! For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Apex Flat PC Drip Line - 18mm, 36" Spacing, .45MIL, 0.55 GPH, 1000' Roll
#92-PC-F18455536-1000 Was $181.32 Now $91.60 While Supplies Last Freight Not Included - Minimum Order 24 RollsCall 517-458-9741 To Order Today!
Clipline Multi Bar F 18MM 45mil .55GPH@24"x1000' 1CL1D C.3010
92-PC-I18455524-1000-1C Was $148.33 Now $114.21 While Supplies Last Freight Not Included - Minimum Order 24 RollsCall 517-458-9741 To Order Today!
-
This 15 mil Drip Tape was designed to be used as a supply line to bring water to the tape-loc fittings which attach to the drip tape. As indicated in the name of this part #, this drip tape is 50 feet in length. It measures 5/8″ ID (inside diameter) and is 15 mil in thickness. Ideal for use in raised beds and gardens. Brand Name: Jain
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
Sale!This Drip Tape has built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tape is 1,000 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .5 GPM/100’. This tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Previous SKU: G-00170 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Out of stockDrip Tape with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 7,500 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Perma-Loc Fittings to work with it. Flow rate is .5 GPM/100’. The drip tape is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. Extra Discounts available for Pallet Quantities. PLEASE CALL FOR LTL FREIGHT RATES ON ORDERS OF 4 ROLLS OR MORE FOR FREIGHT SAVINGS. OUR ONLINE STORE ONLY CALCULATES UPS AND USPS RATES. 517-458-9741. THANK YOU! Brand Name: Jain
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Drip Tubing (100′ Roll) with built-in emitters spaced every 12 inches for saturation coverage of desired area. Maximum working pressure of 15 PSI recommended. As indicated in the name of this part #, this drip tubing is 100 feet in length. It measures 5/8″ ID (inside diameter) and is 8 mil in thickness. These measurements allow all of our Tape-Loc Fittings to work with it. Flow rate is .5 GPM/100’. The tubing is designed to ensure an even flow and minimize clogging of built-in emitters. Ideal for use in vegetable gardens and flowerbeds where the rows are straight. If your garden is in between the sizes of our Drip Irrigation Garden Kits, you can add extra tubing and Tape-loc fittings to customize the irrigation system to your needs.
-
Sale!A 1/4" emitterline designed for smaller plant and tree rings, Mini-Pepline distributes water through a tube emitter at 6" spacing with .5 GPH flow. Mini-Pepline also works in tandem with multi-port drip manifolds like the Octa-Bubbler, QB2 and Quadra Bubbler. The small footprint of Mini-Pepline allows the tubing to be hidden easily making it a great option for potted plants and small bushes with groundcover. Product Features
- 6" spacing (12" available by special order)
- Uses standard 1/4" barbed fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- Hydrodynamic emitter design ensures continuous flushing of sediments and small particles
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .250" OD x .170" ID - 1/4"
- Operating pressure range: 10 - 50 PSI
- Wall thickness: .040"
- Filtration requirements: 150 mesh
- Emitter flow rate: .5 GPH (nominal at 10 PSI)
- Coil length: 100' (500' and 1000' available by special order)
-
Sale!A 1/4" emitterline designed for smaller plant and tree rings, Mini-Pepline distributes water through a tube emitter at 6" spacing with .5 GPH flow. Mini-Pepline also works in tandem with multi-port drip manifolds like the Octa-Bubbler, QB2 and Quadra Bubbler. The small footprint of Mini-Pepline allows the tubing to be hidden easily making it a great option for potted plants and small bushes with groundcover. Product Features
- 6" spacing (12" available by special order)
- Uses standard 1/4" barbed fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- Hydrodynamic emitter design ensures continuous flushing of sediments and small particles
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .250" OD x .170" ID - 1/4"
- Operating pressure range: 10 - 50 PSI
- Wall thickness: .040"
- Filtration requirements: 150 mesh
- Emitter flow rate: .5 GPH (nominal at 10 PSI)
- Coil length: 500'
-
Sale!Product Features
- 12" spacing
- Uses standard Power Loc 55 fittings
- Black tubing
- Patented Cascade Labyrinth Technology reduces chance of clogging
- Root Barrier- prevents roots and debris from entering line
- UV Resistant
- Silicone diaphragm (molded - not cut)
- Size: .5"
- Operating pressure range: 7 - 60 PSI
- Wall thickness: .040"
- Filtration requirements: 120 mesh
- Emitter flow rate: 1 GPH (nominal at 10 PSI)
- Coil length: 100'
This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
Want to see more Drip irrigation ideas? Visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
This dripper plug assembly is located inside of the Oil Reservoir. The Dripper Plug Assembly consists of items #304, #305, #306 and #307 on the diagram below.
-
The WER Drive Flange Shim (TRI-MAN-002297-REV-1) is a precision component designed to maintain proper spacing and alignment within WER manure and slurry pump systems. By ensuring correct positioning of the drive flange, this shim helps reduce vibration, minimize component wear, and improve long-term pump performance. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Eccentric Reducer - Carbon Steel Weld Fitting - Schedule 40
-
Sale!End Cap for PVC - Galvanized - Used on end of PVC line to stop water flow. Includes gasket. Available in 4", 6" & 8" sizes. Brand Name: Pierce
-
Sale!This is used on the end of IPS PVC lines to stop water flow. Includes gasket. They are available in 6" IPS & 8" IPS sizes. PIP sizes are available by special order. Please call for more information. Brand Name: Pierce
-
The WER External Snap Ring (160-TRI-PUR-000218) is a precision-engineered retaining ring designed to secure bearings and components within WER manure and slurry pump systems. Built from durable materials for strength and reliability, this snap ring maintains proper alignment under heavy loads and harsh agricultural conditions. Here is a link to the WER Owners Manual, including schematics. As a proud WER dealer, let us know if we can help with anything not currently on our website. Call 517-458-9741 or email info@triplekirrigation.com.
-
Fulcrum Eyebolt for the #5 and #7 Protek hand primers. Made out of a heavy duty plated steel. The overal length of this Fulcrum Eyebolt measures 6-5/8" (tip to tip). Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Fulcrum Eyebolt for Protek hand primer #9. Made out of a heavy duty plated steel. The overal length of this Fulcrum Eyebolt measures 5-1/2" (tip to tip). Be sure to check out our full line of Protek Primers and replacement parts! Most parts are in stock and may ship the same day! Brand Name: Protek
-
Replacement irrigation pipe gasket specifically designed to seal the connection between aluminum tubing and Felton couplers. Made of long lasting, durable rubber. Fits Felton couplers A Felton gasket is a specialized type of gasket used in irrigation systems to ensure a watertight seal between various components, such as pipes, valves, and fittings. These gaskets are typically made from durable rubber or similar materials to withstand the pressures and environmental conditions found in irrigation systems. The name "Felton gasket" is derived from the company or manufacturer that originally produced or popularized this type of gasket. It is common in various industries for certain products to be named after the company that first introduced or became widely associated with them. In this case, the Felton gasket likely got its name from Felton, a company recognized for its contributions to the irrigation and plumbing sectors. Felton gaskets are valued in irrigation for their reliability and effectiveness in preventing leaks, contributing to the efficiency and sustainability of irrigation practices. Their design and material composition make them particularly suited to the demands of agricultural water management. Check out all of our commercial grade irrigation gaskets.
-
Steel locking clamp used to connect Felton ringlock type fittings.
Only available in either 6" or 8".
This clamp does not work on any other type of ringlock fitting because it is too large in diameter.
For an overview of the different types of clamps available visit the following video:
Clamps Explained!
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
PVC is one of the most specified thermoplastics for piping system components, including, valves, fittings, flanges, and many specialty products. PVC has excellent chemical and corrosion resistance to a broad range of fluids including water, deionized water, most mineral acids, bases, salts and paraffinic hydrocarbon solutions. PVC is not recommended for use with chlorinated or aromatic hydrocarbons, esters, or polar solvents such as ketones. Spears® PVC materials conform to ASTM Cell Classification 12454 (formerly designated as Type I, Grade 1). The maximum recommended service temperature of PVC products is 140° F (60° C).
-
Sale!Female Coupler x Female Thread. Made out of heavy-duty and durable polypropylene. Stainless steel rings, arms and pins. Most complete line of polypropylene couplings available. Versatile- interchangeable with all types of cam lever couplers. Precision molded- insures a uniform and accurate fit. Durable- Polypropylene is glass filled for rugged strength and durability. Smooth operating- finger rings are designed for easy opening of cam levers. 100 P.S.I. at 0 degrees F; 125 P.S.I. at 70 degrees F; 70 P.S.I. at 150 degrees F; CAP-50 P.S.I.; Couplings 75 P.S.I. max. Economical and superior in performance. Standard with EPDM gasket. *Remember to check out our full line of Banjo Fittings!
Brand Name: Banjo
