-
#7 Berkeley Diaphragm - Height 2 5/8" (bottom to top of lip) x 6 3/4" Outside Diameter Top (outside of lip to outside of lip) x 5 1/2" Diameter Base Bottom (outside of lip to outside of lip).
-
* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F.
-
1" Insert x 3/4" MPT Adapter is used to couple a 1" rigid hose to a 3/4" FPT (female pipe thread) fitting. Along with coupling the hose with a threaded fitting, it also reduces or increases in size between a 1" O.D. (outside diameter) opening to a 3/4" O.D. Previous SKU: G-00171 For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page.
-
Note: This tubing comes in a 100-foot roll, in a box measuring 31" by 31" by 15", so online you can order two at a time. If you are ordering three or more rolls, please call 517-458-9741 for other shipping options.
Poly Tubing for Drip Irrigation Systems
Polyethylene distribution tubing does not have built-in emitters. This rigid 1" tubing may be used to bring water to the garden or for the mainline to avoid any unnecessary water usage.
Previous SKU: G-00171This product uses Power Loc Fittings - CLICK HERE to see Power Loc Fittings
For more information on Drip Irrigation, visit our Drip Irrigation FAQ (Frequently Asked Questions) page. -
1" Stem w/ Solid Yoke for 8" Item 3 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).
-
1/2" Inline Fertilizer Injector Assembly includes a Venturi injector, a suction line kit (a piece of water tube, a flow controller and a filter) and the fittings required to convert it to 3/4" MHT x 3/4" FHT to enable easy connection to a 3/4" garden hose. This assembly can be used with our Gator 250 and Gator 1000 Drip Irrigation Kits. The Gator 100 is not large enough to enable the injector to work properly. We recommend a minimum flow rate of 1.5 gallons per minute. This kit now includes an atmospheric vacuum breaker, to prevent any potential backflow of fertilizer!
-
1/2" - 3/4" - 1" Sizes of 100' - Clear Vinyl Tubing Available for purchase
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Sale!The right air hose can help simplify a lot of chores in your operation. What should you be looking for in a quality air hose? CLICK HERE to learn about the 10 things to look for when buying air hoses for commercial use. Mandals Mantex is a lightweight, yet rugged and hard-wearing hose. It is made from a blend of nitrile rubber and PVC, with an added UV barrier to prevent damage from UV radiation. Mandals Mantex HP is a world-class agricultural lay flat air hose designed for compressed air at high working pressures, while still offering a lightweight solution that is easy to deploy and store. An ideal agricultural air hose!
- Mandals Mantex Air Hose with Dixon GJ Boss Female Coupling with Polymer Seat
- Plated Iron
- .55lbs/ft
- 600 PSI Pressure Rating
- 2535 Burst Pressure Rating
- Wall Thickness .17in
- Tensile Strength 31,700 lbs
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Easy On/Off hose connections. Positive seals. Quick & easy assembly. Maximum operating pressure 300 PSI.
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
* Glass Reinforced Polypropylene. * Heavy Duty Schedule 80. * Lightweight with excellent strength. * NPT threads. * Excellent chemical resistance. * Pressure to 150PSI at 70° F
-
* Positive Seals. * Quick & Easy Assembly. * Easy On/Off Hose Connections. * 360° Orientation. * 1"& 2" fittings pressure to 150PSI at 70°F. * 3" fittings pressure to 125PSI at 70°F.
-
Please call 517-458-9741 for the very best shipping rates on this product!
-
3/4" Lock Nut Item 6 in the illustration This clamps to the Valve Stub to allow water flow control in one direction. This fitting can be used with either Band & Latch OR Ringlock (except the 3″ size which is Band & Latch only).